ToolkitRC M6D Dual AC/DC Battery Charger Workstation Instruction Manual

Introduksjon

The ToolkitRC M6D Dual AC/DC Battery Charger Workstation is a versatile and powerful charging solution designed for various battery chemistries. It offers dual independent outputs, allowing simultaneous charging from both AC and DC power sources. This manual provides essential information for safe and efficient operation of your M6D charger.

Nøkkelfunksjoner

• Built-in AC/DC power supply for flexible power input.
• Dual charge outputs for charging two batteries simultaneously.
• USB 65W fast charge capability for external devices.
• Vibrant 3.5" IPS color screen for clear information display.
• Intuitive metal dial wheel for easy menu navigation and settings adjustment.
• Supports multiple battery types: Lipo, LiHV, LiFe, LiIon (1-6S), NiMh (1-16S), Pb (1-10S).

Oppsett

1. Unboxing og innledende inspeksjon

Carefully remove all components from the packaging. Verify that all items listed in the package contents are present and undamaged. The package includes the M6D Dual AC/DC Battery Charger Workstation, a screen protector, and power cords.

Figure 1: ToolkitRC M6D charger and included accessories.

2. Strømtilkobling

The M6D charger can be powered by either AC (Alternating Current) or DC (Direct Current) sources.

• Vekselstrøm: Connect the provided AC power cord to the AC input port on the back of the charger and then to a standard wall outlet (100-240V).
• Likestrøm: Connect a DC power source (7.0-28.0V, MAX 30A) to the DC input port on the back of the charger. Ensure correct polarity.

Figur 2: Bak og på siden view of the M6D charger with power input ports.

3. Batteritilkobling

Connect your battery to one of the two charge outputs (CHA or CHB) on the front of the charger. Always connect both the main power lead (e.g., XT60) and the balance lead to the corresponding ports on the charger. The balance lead is crucial for monitoring individual cell voltages and ensuring safe, balanced charging.

Figur 3: Foran view of the M6D charger with dual output ports.

Bruksanvisning

1. Navigasjon og skjerm

The M6D features a 3.5" IPS color screen and a metal dial wheel for intuitive navigation. Rotate the dial to scroll through menus and options, and press the dial to confirm selections.

2. Selecting Battery Type and Task

After connecting your battery, the charger will typically prompt you to select the battery type (Lipo, LiHV, LiFe, LiIon, NiMh, Pb) and the desired task (Charge, Balance, Discharge, Storage, etc.).

• Lade: Standard charging mode. For LiPo batteries, this typically includes balancing.
• Balansere: Charges and balances individual cells to ensure they have equal voltage, prolonging battery life.
• Utflod: Discharges the battery to a specified voltage.
• Lagring: Charges or discharges the battery to a safe storage voltage (e.g., 3.8V per cell for LiPo) to prevent degradation over time.
• Hurtiglading: Charges the battery at a higher rate, potentially without full balancing. Use with caution.

The charger supports 1-6S for Lipo/LiHV/LiFe/LiIon, 1-16S for NiMh, and 1-10S for Pb batteries. Always ensure the selected battery type and cell count match your connected battery to prevent damage.

3. Setting Charge Parameters

Adjust parameters such as charge current (Amps) and target voltage as needed. For LiPo batteries, a common safe charging rate is 1C (e.g., 5000mAh battery charged at 5A). Refer to your battery's specifications for recommended charge rates.

4. USB-C Fast Charging

The M6D includes two USB-C ports with MAX 65W output (3.25A @ 20.0V) supporting PD, QC, AFC, FCP, SCP, PE, SFCP, and VOC protocols. These ports can be used to fast charge compatible smartphones, tablets, or other accessories.

Produktvideoer

G-Tech Charger Series Overview

6200mAh Battery Installation Test

Vedlikehold

• Rengjøring: Regularly wipe the charger's exterior with a soft, dry cloth. Avoid using solvents or abrasive cleaners.
• Lagring: Oppbevar laderen på et kjølig, tørt sted vekk fra direkte sollys og ekstreme temperaturer.
• Kabelinspeksjon: Periodically inspect all cables and connectors for signs of wear or damage. Replace any damaged cables immediately.
• Fastvareoppdateringer: Check the ToolkitRC official webnettstedet for tilgjengelige fastvareoppdateringer for å sikre optimal ytelse og kompatibilitet.

Feilsøking

• Laderen slår seg ikke på:
  • Ensure the AC power cord is securely connected to both the charger and the wall outlet, or that the DC power source is correctly connected and providing sufficient voltage.
  • Sjekk strømkilden for funksjonalitet.
• Batteri lades ikke:
  • Verify that both the main power lead (e.g., XT60) and the balance lead are correctly and securely connected to the charger.
  • Confirm that the selected battery type and cell count in the charger settings match the connected battery.
  • Check for any error messages on the screen and refer to the charger's internal error code explanations if available.
• Unusual Heat or Smell:
  • Immediately disconnect the battery and power source.
  • Do not attempt to continue charging. Contact customer support.

Spesifikasjoner

Garanti og støtte

For detailed warranty information, technical support, or service inquiries, please refer to the official ToolkitRC webnettstedet eller kontakt din autoriserte forhandler. Ta vare på kjøpskvitteringen som kjøpsbevis for garantikrav.