WORKPRO bærbar dekkpumpe W125218A brukerhåndbok

1. Introduksjon

Thank you for choosing the WORKPRO Portable Tire Inflator W125218A. This device is designed for convenient and efficient inflation of tires for cars, motorcycles, bicycles, and various sports balls. It features a digital display, auto shut-off, multiple inflation modes, an LED light, and a power bank function. Please read this manual thoroughly before use to ensure safe and optimal operation.

Image: The WORKPRO Portable Tire Inflator is suitable for a wide range of applications, including car tires, motorcycle tires, bicycle tires, swimming rings, and various sports balls.

2. Sikkerhetsinformasjon

Følg alltid følgende sikkerhetsregler for å forhindre skade eller skade på enheten:

• Ikke la pumpeenheten være uten tilsyn under bruk.
• Ensure the correct pressure setting for the item being inflated to avoid over-inflation, which can cause bursting and serious injury.
• The inflation hose and nozzle may become hot during prolonged use. Allow them to cool before handling.
• Hold enheten unna barn og kjæledyr.
• Ikke bruk pumpen i våte forhold eller i nærheten av brennbare væsker eller gasser.
• Use only the provided accessories and adapters.
• If the device overheats, allow it to cool down before resuming operation.
• Wear appropriate eye and hearing protection during use.

3. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• WORKPRO Portable Tire Inflator
• Inflasjonsslange
• Needle Valve Adapter (for balls)
• Presta Valve Adapter (for some bicycles)
• Wide Nozzle Adapter (for inflatables)
• USB ladekabel
• Oppbevaringspose

Image: The WORKPRO Portable Tire Inflator shown with its included accessories: inflation hose, various nozzle adapters, USB charging cable, and a storage bag.

4. Produktet er overview

Familiarize yourself with the components of your tire inflator:

• Digital skjerm: Shows current pressure, target pressure, battery level, and selected mode.
• Kontrollknapper: Power, Mode selection, Pressure adjustment (+/-).
• Inflation Port: Where the inflation hose connects.
• LED lys: For belysning under forhold med lite lys.
• USB-C ladeport: For lading av enheten.
• USB-A utgangsport: Fungerer som en powerbank.

Bilde: En detaljert view of the inflator's digital display, showing pressure readings, battery indicator, and the three-color LED indicators for pressure status (red, yellow, green).

5. Oppsett

5.1 Innledende lading

Before first use, fully charge the tire inflator. The device is powered by three 2500mAh rechargeable batteries.

1. Connect the provided USB charging cable to the USB-C charging port on the inflator.
2. Koble den andre enden av USB-kabelen til en passende USB-strømadapter (ikke inkludert) eller en USB-port med strømforsyning.
3. The battery indicator on the digital display will show charging progress. A full charge typically takes 3 to 5 hours.
4. Når den er fulladet, koble fra ladekabelen.

Image: The inflator connected to a car tire, highlighting its 7500 mAh battery capacity, capable of inflating multiple car tires on a single charge.

6. Bruksanvisning

6.1 Slå på/av

• To power on, press and hold the power button (usually the 'O' button) for a few seconds.
• To power off, press and hold the power button again. The device will also automatically power off after a period of inactivity.

6.2 Valg av oppblåsningsmodus

The inflator offers 4 smart preset modes and 1 manual mode:

1. Press the 'M' (Mode) button to cycle through the available modes: Car, Motorcycle, Bicycle, Ball, and Manual.
2. Each preset mode has a default pressure value (e.g., Car: 36 PSI, Motorcycle: 35 PSI, Bicycle: 45 PSI, Ball: 8 PSI, Manual: 60 PSI).
3. In any mode, you can adjust the target pressure using the '+' and '-' buttons. The maximum adjustable pressure is 150 PSI.
4. To change pressure units (PSI, BAR, KPA), press the 'M' button and '+' button simultaneously.

Image: The inflator's screen showing the selection of different inflation modes (Car, Motorcycle, Bicycle, Ball, Manual) with their respective default PSI values.

6.3 Connecting to the Item for Inflation

1. Screw the inflation hose securely into the inflation port on the top of the device.
2. For car, motorcycle, or bicycle (Schrader valve) tires, attach the other end of the hose directly to the tire valve stem. Ensure a tight connection to prevent air leakage.
3. For Presta valves (some bicycles), balls, or other inflatables, attach the appropriate adapter to the inflation hose before connecting to the item.
4. Once connected, the digital display will show the current pressure of the item.

6.4 Starte og stoppe oppblåsing

1. After setting the desired pressure and connecting the hose, press the power button (usually the 'O' button) to start inflation.
2. The inflator will automatically stop when the preset target pressure is reached. This is the auto shut-off feature.
3. To manually stop inflation at any time, press the power button again.
4. After inflation, carefully disconnect the hose from the item and then from the inflator. Be aware that the hose may be hot.

Image: The inflator in use, demonstrating its fast inflation capability for a 195/60R16 car tire, indicating inflation from 25-35 PSI in under 1 minute and 0-35 PSI in under 5 minutes.

6.5 Pressure Indicator Lights

The device features three-color LED indicators for real-time pressure status:

• Grønt lys: Pressure is between 90% and 110% of the preset value.
• Gult lys: Pressure is below 90% of the preset value.
• Rødt lys: Pressure exceeds 110% of the preset value.

6.6 LED-lommelyktfunksjon

The built-in LED light can be used for illumination:

• Press the dedicated light button (if available, or a combination of buttons as per device markings) to turn on the flashlight.
• Cycle through different modes: steady light, flashing light, and SOS emergency mode.
• Trykk på knappen igjen for å slå av lyset.

Image: The inflator's LED flashlight function demonstrated for night cycling, general illumination, and under-hood car inspection.

6.7 Funksjon for bærbar powerbank

The inflator can also serve as a power bank to charge electronic devices:

1. Ensure the inflator is powered on.
2. Connect your electronic device (e.g., smartphone) to the USB-A output port using a compatible charging cable (not included).
3. The inflator will begin charging your device.
4. Disconnect your device when charging is complete or when the inflator's battery is low.

Image: The inflator being used to charge a smartphone via its USB output port, illustrating its portable power bank capability.

7. Vedlikehold

• Rengjøring: Tørk av enheten med en myk, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is off and disconnected from any power source before cleaning.
• Lagring: Oppbevar pumpen og tilbehøret i den medfølgende oppbevaringsposen på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer.
• Batteripleie: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device periodically if not used for extended periods (e.g., every 3-6 months).

8. Feilsøking

9. Spesifikasjoner

10. Garanti og støtte

For warranty information, technical support, or service inquiries, please contact WORKPRO customer service. Refer to the product packaging or the official WORKPRO webnettsted for kontaktinformasjon.

Ta vare på kjøpsbeviset for garantikrav.