Introduksjon
This manual provides instructions for the LENRUE Bluetooth Speaker Model A22. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the speaker.
Hva er i esken
- 1× Bluetooth Speaker
- 1× Micro USB Charge Cable
- 1× AUX-kabel
- 1× Lanyard
Produkt overview
Gjør deg kjent med høyttalerens komponenter og kontroller.
Høyttalerfunksjoner
- Lydutgang: Equipped with 2 high-quality horns for clear audio output.
- Vannmotstand: IPX6 waterproof and dustproof rating, suitable for splashes and rain. Note: The speaker cannot be completely immersed in water.
- Portabilitet: Features a detachable lanyard for easy carrying and hanging on bicycles, backpacks, or tents.
- Trådløs stereoparing (TWS): Allows connection of two speakers for a powerful surround sound experience.
- Tilkobling: Supports Bluetooth 5.0, TF (Micro SD) card, and AUX input for versatile playback options.
Kontroller og porter

Bilde: Topp view of the LENRUE Bluetooth Speaker, highlighting the power, volume up/down, and play/pause/track skip buttons.

Bilde: Side view of the LENRUE Bluetooth Speaker, revealing the covered charging port (Micro USB), AUX input, and TF card slot.
Oppsett
Lader høyttaleren
- Connect the Micro USB charge cable to the speaker's charging port.
- Koble den andre enden av kabelen til en USB-strømadapter (ikke inkludert) eller en datamaskins USB-port.
- The charging indicator light will illuminate. It will turn off or change color when fully charged.
Bluetooth-paring
- Power on the speaker by pressing and holding the power button. The Bluetooth indicator light will flash, indicating it's in pairing mode.
- On your device (phone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "LENRUE A22" from the list of devices.
- Når den er paret, vil Bluetooth-indikatorlampen slutte å blinke og lyse konstant.
True Wireless Stereo (TWS) Pairing (for two speakers)
- Ensure both LENRUE A22 speakers are powered off.
- Slå på begge høyttalerne.
- Disconnect any previously paired Bluetooth devices from both speakers.
- On one speaker, double-click the power button to enter TWS pairing mode. You will hear a "beep" sound.
- The speakers will automatically pair with each other. Once paired, one speaker will act as the master and its indicator light will flash, while the other's light will be solid.
- On your device, enable Bluetooth and select "LENRUE A22" to connect to the master speaker.

Image: Two LENRUE Bluetooth Speakers demonstrating True Wireless Stereo (TWS) pairing for enhanced sound.
Bruksanvisning
Grunnleggende funksjoner
- Slå på/av: Trykk og hold inne strømknappen.
- Spill av/pause: Trykk på Play/Pause-knappen.
- Volum opp: Trykk på «+»-knappen.
- Volum ned: Trykk på "-"-knappen.
- Neste spor: Trykk og hold inne «+»-knappen.
- Forrige spor: Trykk og hold inne "-"-knappen.
Bruker AUX-inngang
- Connect one end of the AUX cable to the speaker's AUX port.
- Connect the other end to your audio device's headphone jack.
- Høyttaleren vil automatisk bytte til AUX-modus.
Using TF Card
- Insert a TF (Micro SD) card with music files inn i TF-kortsporet.
- The speaker will automatically switch to TF card mode and begin playing music.

Image: The LENRUE Bluetooth Speaker demonstrating multiple connectivity options, including Bluetooth, AUX, and TF card, with a laptop, tablet, and smartphone.
Vedlikehold
- Rengjøring: Tørk av høyttaleren med en myk, damp klut. Ikke bruk sterke kjemikalier eller skurende rengjøringsmidler.
- Vannmotstand: The speaker is IPX6 waterproof, meaning it is protected against powerful water jets. Do not submerge the speaker in water. Ensure the port cover is securely closed to maintain water resistance.
- Lagring: Oppbevar høyttaleren på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer.
- Batteripleie: For å forlenge batterilevetiden, lad høyttaleren helt opp før første gangs bruk, og minst én gang hver tredje måned hvis den ikke brukes regelmessig.

Image: The LENRUE Bluetooth Speaker shown near water, emphasizing its IPX6 waterproof rating.
Feilsøking
Ingen strøm
- Sørg for at høyttaleren er fulladet.
- Press and hold the power button for a few seconds to turn it on.
Kan ikke pares via Bluetooth
- Sørg for at høyttaleren er i paringsmodus (blinkende Bluetooth-indikator).
- Sørg for at Bluetooth er aktivert på enheten din.
- Flytt høyttaleren nærmere enheten din (innenfor 10 meter).
- Forget "LENRUE A22" from your device's Bluetooth list and try pairing again.
- If using TWS, ensure both speakers are correctly paired to each other first, then connect your device to the master speaker.
Ingen lyd eller lavt volum
- Juster volumet på både høyttaleren og den tilkoblede enheten.
- Ensure the speaker is properly connected via Bluetooth, AUX, or TF card.
- Hvis du bruker AUX, sjekk kabeltilkoblingen.
- If using TF card, ensure the card is inserted correctly and contains playable audio files.
Lydforvrengning
- Reduser volumet på både høyttaleren og den tilkoblede enheten.
- Flytt høyttaleren nærmere Bluetooth-enheten din for å unngå forstyrrelser.
- Sørg for at høyttaleren er fulladet.
Problemer med TWS-paring
- Ensure both speakers are the same model (LENRUE A22).
- Follow the TWS pairing steps carefully, ensuring no other Bluetooth devices are connected to either speaker during the initial TWS pairing process.
Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modellnavn | A22 |
| Vare modellnummer | HU-XI-201 |
| Merke | LENRUE |
| Materiale | Plast |
| Høyttalertype | Utendørs |
| Spesielle funksjoner | Waterproof (IPX6), Lanyard, Wireless Stereo Pairing (TWS) |
| Anbefalt bruk | For smarttelefoner eller nettbrett |
| Kompatible enheter | Phone, Laptop, Tablet |
| Surround Sound Channel | 2.0 |
| Farge | Rød |
| Produktdimensjoner | 1.96" D x 7.08" B x 2.56" H |
| Varevekt | 11.6 unser (330 gram) |
| Maksimal rekkevidde | 33 fot (10 meter) |
| Kontrollmetode | Røre |
| Trådløs teknologi | Bluetooth 5.0 |
| Høyttalerstørrelse | 4 centimeter |
| Strømkilde | Batteridrevet |
| Type lyddriver | Dynamisk driver |
| Høyttalerens maks. utgangseffekt | 3 watt |
| Vannmotstandsnivå | Vannbestandig (IPX6) |
Garanti og støtte
The LENRUE Bluetooth Speaker Model A22 comes with an extended warranty. For specific warranty details or technical support, please refer to the contact information provided with your purchase or visit the official LENRUE webnettstedet.
Viktig sikkerhetsinformasjon
- Ikke utsett høyttaleren for ekstreme temperaturer eller direkte sollys over lengre tid.
- Ikke forsøk å demontere eller modifisere høyttaleren. Dette kan ugyldiggjøre garantien og forårsake skade.
- Hold høyttaleren unna sterke magnetfelt.
- Dispose of the battery according to local regulations. Do not dispose of it in fire.
- Sørg for at ladeporten er tørr før lading for å unngå skade.