PRORECK SP-218X Aktivt drevet PA DJ Subwoofer-kabinett Bruksanvisning

1. Introduksjon

This manual provides essential information for the safe and efficient operation of your PRORECK SP-218X Active Powered PA DJ Subwoofer Cabinet. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Keep this manual for future reference.

The PRORECK SP-218X is a powerful active subwoofer designed for sound reinforcement, featuring dual 18-inch woofers, a Class-D amplifier, and multiple DSP presets for various applications.

2. Sikkerhetsinformasjon

Følg alltid grunnleggende sikkerhetsregler når du bruker dette produktet for å redusere risikoen for brann, elektrisk støt og skade.

• Strømkilde: Connect the unit only to a 115V~60Hz power supply. Ensure the power cord is not damaged or pinched.
• Ventilasjon: Ikke blokker ventilasjonsåpningene. Sørg for tilstrekkelig luftstrøm rundt enheten for å forhindre overoppheting.
• Fuktighet: Do not expose the unit to rain or moisture. Do not place objects filled with liquids, such as vases, on the unit. This product is not waterproof.
• Plassering: Plasser enheten på en stabil, jevn overflate. Unngå å plassere den i nærheten av varmekilder eller i direkte sollys.
• Service: Ikke prøv å utføre service på dette produktet selv. Henvis all service til kvalifisert servicepersonell.
• Håndtering: The unit is heavy (159.2 lbs). Use caution and proper lifting techniques when moving it. Utilize the side handles for transport.

3. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• 1 x PRORECK SP-218X aktivt drevet PA DJ subwooferkabinett
• 2 x 18-inch Woofers (integrated within the cabinet)
• Strømkabel
• Brukerhåndbok (dette dokumentet)

4. Produktfunksjoner

• Kraftig ytelse: 1000 Watts RMS / 5000 Watts Peak power output.
• Doble 18-tommers basselementer: Equipped with 80oz magnets and 3-inch voice coils for deep bass reinforcement.
• Klasse-D Amplivligere: Efficient built-in amplification for clear and powerful sound.
• DSP forhåndsinnstillinger: Features 3 Digital Signal Processing presets for optimized sound in various scenarios.
• XLR-tilkobling: XLR input and output jacks for easy connection to mixers or other amplivsstil.
• Elektronisk crossover: Adjustable crossover from 35Hz to 120Hz.
• XLR høypassutgang: Filtered output from 120Hz to 20KHz for connecting full-range speakers.
• Phase Selection: Button to select phase from normal to 180° for optimal multi-subwoofer setups.
• Slitesterk konstruksjon: Super solid housing made of plywood to reduce resonance and improve sound quality.
• Portabilitet: Two side handles for easier transport.

5. Kontroller og tilkoblinger

Bildebeskrivelse:

This image displays the rear control panel of the PRORECK SP-218X subwoofer, highlighting various inputs, outputs, and controls. Numbered labels correspond to the descriptions below.

1. XLR Output (FULL RANGE): Parallel balanced stereo XLR output. Delivers an exact copy of the input signal.
2. XLR-inngang: Balansert XLR-inngang for tilkobling av signaler fra miksere eller annet amplivsstil.
3. Volum: Knob to increase or decrease the volume control level.
4. Fase: Phase selection button (NORMAL - REV180°).
5. Begrense: LED indicator. Illuminates when the input signal is too high, which may distort the output sound or damage the unit.
6. Strømindikator: LED strømindikator.
7. XLR Output (HIGH PASS): Filtrert balansert XLR-utgang (høypass fra 120Hz).
8. På / av bryter: Main power switch to turn the unit on and off.
9. Inngang Voltage: Power input for 115V~60Hz.

Bildebeskrivelse: This image highlights the design features of the subwoofer, including the rubber foot pads on the sides that allow the subwoofer to stand upright, the connection detail for easy assembly and movement, and the lifting handles for convenience.

6. Oppsett

1. Plassering: Position the subwoofer on a stable, level surface. Consider room acoustics and desired bass response when choosing a location. Ensure adequate space for ventilation.
2. Strømtilkobling: Ensure the ON/OFF switch (8) is in the OFF position. Connect the power cable to the Input Voltage (9) receptacle on the rear panel and then to a grounded 115V~60Hz AC outlet.
3. Lydinngangstilkobling:
   • Connect your mixer or audio source to the XLR Input (2) using a balanced XLR cable.
   • If connecting additional full-range speakers, use the XLR Output (HIGH PASS) (7) to send a filtered signal (120Hz and above) to those speakers. For a full-range signal to another subwoofer or device, use the XLR Output (FULL RANGE) (1).
4. Innledende voluminnstilling: Turn the Volume knob (3) to its minimum setting before powering on.

7. Bruksanvisning

1. Strøm på: Flip the ON/OFF Switch (8) to the ON position. The Power Indicator (6) LED should illuminate.
2. Juster volum: Slowly increase the Volume knob (3) to the desired listening level. Monitor the Limit LED (5). If it illuminates frequently or stays lit, reduce the input signal level from your source or decrease the subwoofer's volume to prevent distortion and potential damage.
3. Fasejustering: If using multiple subwoofers or integrating with other speakers, adjust the Phase button (4) (NORMAL or REV180°) to achieve the best bass response and alignment with other audio components. Experiment with both settings to find the optimal sound.
4. DSP forhåndsinnstillinger: The SP-218X includes 3 DSP presets. Refer to the specific DSP control panel (if present, not detailed in provided images) for instructions on how to select and utilize these presets to optimize sound for different environments or music types.
5. Slå av: Before disconnecting power or making changes to connections, turn the Volume knob (3) to minimum and then flip the ON/OFF Switch (8) to the OFF position.

8. Vedlikehold

• Rengjøring: Bruk en myk, tørr klut til å rengjøre utsiden av subwooferen. Ikke bruk slipende rengjøringsmidler, voks eller løsemidler.
• Ventilasjon: Sjekk regelmessig at ventilasjonsåpningene er fri for støv og rusk.
• Lagring: If storing the unit for an extended period, ensure it is in a dry, cool environment, protected from dust and extreme temperatures.
• Undersøkelse: Periodically inspect the power cord and all cables for any signs of damage.

9. Feilsøking

10. Spesifikasjoner

Bildebeskrivelse: This image provides the key dimensions of the PRORECK SP-218X subwoofer, showing a width of 43.9 inches, a height of 22.4 inches, and a depth of 23.6 inches.

11. Garanti og støtte

Garanti: This PRORECK SP-218X subwoofer comes with a 1-year free limited warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

Kundestøtte: For technical assistance, troubleshooting, or warranty inquiries, please contact PRORECK AUDIO customer support. Refer to the contact information provided with your purchase or visit the official PRORECK webnettstedet.

Nettressurser: For ytterligere informasjon og støtte kan du besøke PRORECK-butikk på Amazon.

12. Produktet er overview

Bildebeskrivelse: En front view of the PRORECK SP-218X subwoofer, accompanied by a list of its main specifications: 1000 Watts RMS/5000 peak, XLR output/input, Electronic Crossover (35-120 Hz), XLR High Pass Output (120Hz-20KHz), and 3" Voice Coil.

Bildebeskrivelse: The PRORECK SP-218X subwoofer positioned in a dynamic live event environment, with a crowd of people dancing and stage lighting in the background, illustrating its intended use.

Bildebeskrivelse: En kollasjutstillingasing diverse applications for the PRORECK SP-218X subwoofer, including a live concert, a business meeting, an outdoor musical performance, and a fitness class, demonstrating its versatility.