UTRAI Jstar 5 Car Battery Jump Starter with Air Compressor User Manual

1. Introduksjon

Thank you for choosing the UTRAI Jstar 5 Car Battery Jump Starter with Air Compressor. This versatile device is designed to provide reliable jump-starting for vehicles, inflate tires, and serve as a portable power bank and emergency light. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Sikkerhetsinformasjon

Bruk alltid vernebriller når du arbeider med batterier.
Sørg for tilstrekkelig ventilasjon under drift.
Do not smoke or allow sparks or flames near the battery or jump starter.
Hold enheten unna barn.
Koble til jumperen clamps correctly: Red to positive (+), Black to negative (-). Incorrect connection can cause damage.
Ikke forsøk å starte et frossent batteri med startkabler.
Avoid prolonged use of the air compressor to prevent overheating. Allow it to cool down between uses.
Ikke utsett enheten for regn eller ekstreme temperaturer.

3. Pakkens innhold

Bekreft at alle varene er til stede i pakken din:

UTRAI Jstar 5 Jump Starter with Air Compressor
Smart Jumper Clamps
USB-C ladekabel
DC Car Charger Adapter
Various Inflation Nozzles
Brukerhåndbok
EVA Protective Carrying Case

UTRAI Jstar 5 Package Contents — Figure 3.1: Contents of the UTRAI Jstar 5 package, including the jump starter, smart clamps, cables, nozzles, and carrying case.

4. Produktfunksjoner

Kraftig starthjelp: 3500A peak current for 12V vehicles, capable of starting up to 8.0L gas and 8.0L diesel engines.
Batteri med høy kapasitet: 27000mAh internal battery for multiple jump starts and extended power bank use.
Integrated Air Compressor: 150 PSI maximum pressure with an inflation rate of 45 L/Min, suitable for various tires and inflatables.
Multi-functional Device: Combines jump starter, air compressor, portable power bank, and emergency LED light in one compact unit.
3 LED-lysmoduser: Features Normal, Flashing, and SOS modes for illumination and emergency signaling.
Large LED Digital Screen: Provides clear display of battery status, tire pressure, and operational modes.
Allsidige ladeporter: Includes QC3.0 USB Output (5V-2.4A), Type-C Input (5V-3A, 9V-2A), and EC5 Output.

UTRAI Jstar 5 Multi-functionality — Figure 4.1: The UTRAI Jstar 5 offers 6-in-1 multi-functionality, including jump starting, air compression, flashlight, tire inflation, power bank, and SOS light.

UTRAI Jstar 5 Jump Starter Capacity — Figure 4.2: The jump starter features a 27000mAh battery and 3500A peak current, capable of starting 12V vehicles with up to 8.0L gas or diesel engines.

UTRAI Jstar 5 Cordless Tire Inflator — Figure 4.3: The cordless tire inflator includes a preset pressure function for convenient and accurate inflation.

5. Oppsett

5.1 Innledende lading

Before first use, fully charge the UTRAI Jstar 5. Connect the USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The LED screen will indicate the charging status. A full charge is recommended for optimal performance.

5.2 Forstå skjermen

The large LED digital screen displays important information:

Batterinivå: Indicates the remaining charge of the internal battery.
Trykkenheter: Displays PSI, BAR, or KPA for the air compressor.
Output/Input Status: Shows when USB or DC outputs are active, or Type-C input is charging.

UTRAI Jstar 5 Large LED Digital Screen — Figure 5.1: The large LED digital screen provides clear readings of battery level and tire pressure values, making operation easier.

6. Bruksanvisning

6.1 Hoppstart av et kjøretøy

Ensure the jump starter is sufficiently charged.
Insert the smart jumper cable into the EC5 output port on the jump starter.
Koble til den røde (+) clamp til den positive polen på kjøretøyets batteri.
Koble til den svarte (-) clamp til den negative polen på kjøretøyets batteri.
Once connected, the smart clamps will indicate readiness (e.g., a green light).
Start bilmotoren.
After the engine starts, immediately remove the smart clampfra bilbatteriet, og koble deretter startkabelen fra starthjelpen.

6.2 Using the Air Compressor (Tire Inflator)

Locate the air hose stored on the back of the jump starter.
Screw the air hose connector onto the valve stem of the tire or inflatable item.
Turn on the jump starter. The screen will display the current pressure.
Press the 'M' button to cycle through different inflation modes (e.g., car, motorcycle, bicycle, ball) and select the appropriate one.
Use the '+' and '-' buttons to set your desired target pressure.
Press the 'OK' button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
Disconnect the air hose and store it back in the device.

UTRAI Jstar 5 Jump Start and Tire Inflation Steps — Figure 6.1: Visual guide for jump starting a vehicle (top row) and inflating tires (bottom row) with the UTRAI Jstar 5.

6.3 Using as a Portable Power Bank

The UTRAI Jstar 5 can charge various electronic devices:

Connect your device's USB charging cable to the USB Output port (QC3.0, 5V-2.4A) on the jump starter.
For devices requiring a Type-C connection, use the Type-C input port for charging the jump starter itself, or if the device supports Type-C output from the jump starter (check device compatibility).
The DC Output (12V-16V-10A) can power 12V accessories using the appropriate adapter.

UTRAI Jstar 5 Portable Charging — Figure 6.2: The UTRAI Jstar 5 can quick charge phones, tablets, and other electronic devices via its USB and Type-C ports.

6.4 Bruke LED-lommelykten

The integrated LED light provides illumination and emergency signaling:

Press the dedicated light button (often marked with a lightbulb icon) to turn on the light in Normal mode.
Press the button again to cycle to Flashing mode.
Trykk en tredje gang for SOS-modus.
Trykk en fjerde gang for å slå av lyset.

UTRAI Jstar 5 LED Light Modes — Figure 6.3: The UTRAI Jstar 5 features three LED light modes: Normal, Flashing, and SOS for various situations.

7. Vedlikehold

Rengjøring: Tørk av enheten med en myk, tørr klut. Ikke bruk sterke kjemikalier eller slipende rengjøringsmidler.
Lagring: Store the UTRAI Jstar 5 in its protective carrying case in a cool, dry place, away from direct sunlight and moisture.
Lading: If the device is not used regularly, recharge it every 3-6 months to maintain battery health and prolong its lifespan.

8. Feilsøking

Problem	Mulig årsak	Løsning
Enheten slår seg ikke på	Lav batterilading	Lad opp enheten helt.
Kjøretøyet starter ikke	Feil clamp connection; Severely discharged battery; Vehicle issue	Sørg for at clamps are connected correctly (Red to +, Black to -). Check if the smart clamps indicate readiness. If battery is extremely low, allow a few minutes for the jump starter to provide some charge before attempting to start. Consult a mechanic if the vehicle still doesn't start.
Luftkompressoren blåser seg ikke opp	Hose not securely connected; Preset pressure is lower than current pressure; Overheating	Ensure the air hose is tightly screwed onto the valve. Set the target pressure higher than the current pressure. If the device is hot, allow it to cool down before resuming use.

9. Spesifikasjoner

Trekk	Spesifikasjon
Toppstrøm	3500 Amps
Batterikapasitet	27000 mAh
Luftkompressortrykk	150 PSI (45 L/Min)
Start Voltage	12 volt
Motorkompatibilitet	Opptil 8.0 l bensin / 8.0 l diesel
USB-utgang	QC3.0, 5V-2.4A
Type-C-inngang	5V-3A, 9V-2A
DC-utgang	12V-16V-10A
Produktdimensjoner	8.5 x 4.5 x 3 tommer
Varevekt	2 pund

10. Garanti og støtte

For warranty information, technical support, or any inquiries regarding your UTRAI Jstar 5, please refer to the warranty card included in your package or visit the official UTRAI webKontaktinformasjon for kundeservice finnes vanligvis på produsentens webnettstedet eller i produktdokumentasjonen.

UTRAI Jstar 5