Coaster Fine Furniture 224601KE
Coaster Home Furnishings Nathan Eastern King Panel Bed Frame Instruction Manual
Model: 224601KE | Brand: Coaster Fine Furniture
Introduksjon
This manual provides detailed instructions for the safe assembly, proper usage, and maintenance of your Coaster Home Furnishings Nathan Eastern King Size Panel Bed Frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Sikkerhetsinformasjon
- Sørg for at alle deler er til stede og uskadet før montering. Ikke bruk hvis noen deler mangler eller er ødelagte.
- Monter sengerammen på en myk, ren overflate for å unngå riper eller skader.
- Two or more people are recommended for assembly to prevent injury and ensure proper alignment.
- Do not overtighten screws or bolts, as this may damage the wood.
- This bed frame requires a foundation (box spring or equivalent) for proper mattress support. Do not place a mattress directly on the slats without a foundation.
- Hold små deler unna barn under montering.
- Sjekk alle tilkoblinger med jevne mellomrom for å sikre at de holder seg tette.
Pakkeinnhold
Kontroller at alle følgende komponenter er inkludert i pakken din:
- Sengegavl (1)
- Fotbrett (1)
- Sideskinner (2)
- Slats (Set)
- Maskinvarepakke (bolter, skiver, muttere, unbrakonøkkel)

Monteringsveiledning
Follow these steps to assemble your bed frame:
- Forbered området: Rydd et romslig område for montering. Legg frem alle komponenter og maskinvare.
- Fest sidegrindene til hodegavlen: Align the pre-drilled holes on the side rails with the corresponding holes on the headboard posts. Secure using the provided bolts, washers, and nuts. Do not fully tighten yet.
- Fest sidegrindene til fotbrettet: Repeat the previous step to attach the other ends of the side rails to the footboard. Ensure the footboard's flared legs are correctly oriented.
- Stram alle tilkoblinger: Once all four corners are connected, carefully tighten all bolts using the Allen wrench. Ensure the frame is stable and square.
- Installer lameller: Place the wooden slats across the width of the bed frame, resting them on the support ledges of the side rails. Ensure they are evenly spaced and secure. Some slats may require screwing into the side rails; refer to your specific hardware for details.


Retningslinjer for bruk
- Foundation Required: This panel bed frame is designed to be used with a mattress foundation (e.g., box spring, bunkie board). A mattress placed directly on the slats without a foundation may void the warranty and lead to premature wear of the mattress and frame.
- Vektfordeling: Ensure weight is evenly distributed across the bed frame. Avoid standing or jumping on the bed.
- Plassering: Position the bed frame on a level surface to prevent wobbling or instability.
Vedlikehold og stell
To maintain the appearance and longevity of your bed frame, follow these care instructions:
- Rengjøring: Clean the wood surfaces using a damp cloth. Wipe dry immediately to prevent water marks.
- Unngå sterke kjemikalier: Do not use strong chemicals, abrasive cleaners, or polishes that may damage the finish.
- Eksponering for sollys: Unngå langvarig eksponering for direkte sollys, da dette kan føre til falming eller misfarging av treflater.
- Fuktighetskontroll: Maintain a consistent humidity level in the room to prevent wood from cracking or warping.
- Maskinvaresjekk: Periodically inspect and tighten all assembly hardware to ensure the frame remains stable.

Spesifikasjoner
| Modellnummer | 224601KE |
| Merke | Coaster fine møbler |
| Størrelse | Østkongen |
| Produktdimensjoner | 86.25 cm L x 79.25 cm B x 60 cm H |
| Farge | Grå |
| Materiale | Oak Veneer, Asian Hardwood |
| Montering påkrevd | Ja |
| Foundation Required | Ja |
| Varevekt | 134.5 pund |
| UPC | 021032754099 |
Troubleshooting / Common Questions
- Sengerammen vingler: Sørg for at alle bolter er godt strammet. Sjekk at lasteplanet står på en jevn overflate.
- Knirkende lyder: Squeaking can often be resolved by tightening all hardware. If the issue persists, check the foundation and mattress for proper fit and support.
- Why is a foundation required? Panel beds are designed with slats that provide support for a foundation (like a box spring or bunkie board), which in turn supports the mattress. This design ensures proper mattress longevity and comfort.
Garanti og støtte
Coaster Fine Furniture products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Coaster Fine Furniture website. For assistance with parts, assembly, or any other inquiries, please contact Coaster Fine Furniture customer service.
Du kan også besøke Coaster Fine Furniture Store on Amazon for mer informasjon og produkter.
About Coaster Fine Furniture
Coaster Fine Furniture has been designing, crafting, and distributing stylish furniture for nearly four decades, offering a range of collections to suit various tastes and lifestyles.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.