Brukerhåndbok for AsperX AX260 3000A starthjelp med luftkompressor

1. Sikkerhetsinformasjon

Les alle sikkerhetsadvarsler, instruksjoner, illustrasjoner og spesifikasjoner som følger med dette produktet. Unnlatelse av å følge alle instruksjonene nedenfor kan føre til elektrisk støt, brann og/eller alvorlig skade.

• Bruk alltid vernebriller når du arbeider med batterier.
• Do not operate the jump starter if it is damaged.
• Keep the jump starter away from children.
• Ikke utsett produktet for regn eller våte forhold.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Oppbevar enheten på et kjølig, tørt sted vekk fra direkte sollys.

2. Pakkens innhold

Bekreft at alle varene er til stede i pakken din:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Smart jumperkabel
• 1 x USB-A til USB-C-kabel
• 1 x bæreveske
• 1 x pumpeslange
• 3 x luftdyser
• 1 x brukerhåndbok

3. Produktet er overview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Nøkkelfunksjoner inkluderer:

• 3000A toppstrøm: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• 150 PSI Air Compressor: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• 400-lumen LED-lys: Offers constant lighting, flash, and SOS modes.
• Power Bank-funksjonalitet: USB-A output and USB-C input for charging electronic devices.

4. Oppsett

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Bruksanvisning

5.1. Hoppstart av et kjøretøy

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Koble til den røde clamp til den positive (+) polen på bilbatteriet og den svarte koblingenamp til den negative (-) terminalen.
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Bruk av luftkompressoren

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Trykk på «M»-knappen for å velge ønsket oppblåsningsmodus (bil, motorsykkel, sykkel, ball).
4. Bruk knappene '+' og '-' for å stille inn måltrykket.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Powerbankens funksjonalitet

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Enheten vil begynne å lade automatisk.

5.4. LED-lommelykt

The 400-lumen LED light offers multiple modes for different situations.

• Trykk på lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Hold lamp switch button to turn off the light.

6. Vedlikehold

• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
• Rengjør enheten med en tørr, myk klut. Ikke bruk sterke kjemikalier eller slipende materialer.
• Oppbevares på et kjølig, tørt sted. Unngå ekstreme temperaturer.

7. Feilsøking

• Enheten slår seg ikke på: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Kjøretøyet starter ikke: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Luftkompressoren blåser seg ikke opp: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Spesifikasjoner

9. Offisielle produktvideoer

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Garanti og støtte

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX webnettstedet. Ta vare på kjøpskvitteringen for garantikrav.