1. Introduksjon
Thank you for choosing the Promate SparkTank-20 Car Jump Starter and Power Bank. This device is designed to provide reliable jump-starting for vehicles and portable power for your electronic devices. Please read this manual thoroughly before using the product to ensure safe and optimal operation. Keep this manual for future reference.
2. Produktet er overview og funksjoner
The Promate SparkTank-20 is a versatile device combining a powerful car jump starter with a high-capacity power bank. Key features include:
- Powerful 2000A Peak Current: Capable of jump-starting large cars and motorcycles.
- 20000mAh High-Capacity Power Bank: Gir ampstrøm til å lade flere enheter.
- Smart Clamps with 6 Protection Systems: Ensures safe operation with protection against reverse charging and short circuits.
- 45 W USB-C strømforsyning: Fast charging for USB-C compatible devices and quick recharging of the unit itself.
- Dual QC 3.0 USB Ports: Charges devices up to 4 times faster than conventional chargers.
- 150W DC Output: Powers DC-compatible accessories like tire inflators or car coolers.
- Integrert LED-lommelykt: Features 3 LED modes (Normal, Strobe, SOS) for emergencies.
- LCD Indicator Display: Shows battery status and charging information.
Image: Promate SparkTank-20 Jump Starter highlighting its 2000A peak current capability.
Image: Promate SparkTank-20 showcasing its 20000mAh high-capacity power bank feature.
3. Pakkens innhold
Please check the product packaging for the following items:
- Promate SparkTank-20 Jump Starter and Power Bank Unit
- Smarte startkabler med Clamps
- USB-C ladekabel
- Brukerhåndbok
- Storage Case (may vary by region)
Image: Retail packaging of the Promate SparkTank-20, showing the unit and accessories.
4. Sikkerhetsinformasjon
Read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, explosion, fire, which may result in serious injury, death, or property damage.
- Ikke start på et frossent batteri.
- Do not use the jump starter if the battery voltage er under 12V.
- Ensure proper polarity when connecting the jumper cables (red to positive, black to negative).
- Ikke la den røde og svarte clamps å ta på hverandre.
- Hold enheten unna barn.
- Do not expose the device to water, rain, or extreme temperatures.
- Ikke demonter eller modifiser enheten.
- Use only the provided or approved charging cables and accessories.
- If the device becomes excessively hot during use, discontinue use immediately.
Image: Close-up of the Promate SparkTank-20 smart clamps, illustrating the built-in protection system.
5. Oppsett
5.1 Innledende lading
Before first use, fully charge the SparkTank-20 unit. Connect the provided USB-C charging cable to the USB-C input/output port on the device and to a compatible USB wall adapter (not included). The LCD display will show the charging progress. Charging time may vary depending on the power adapter used.
5.2 Sjekke batterinivået
Press the power button once to check the current battery level on the LCD display. Ensure the unit is sufficiently charged before attempting to jump-start a vehicle.
6. Bruksanvisning
6.1 Hoppstart av et kjøretøy
- Ensure the SparkTank-20 is at least 75% charged.
- Slå av bilens tenning og alt tilbehør.
- Koble til rød (+) clamp of the jumper cables to the positiv (+) terminal of the vehicle's battery.
- Koble til svart (-) clamp of the jumper cables to the negativ (-) terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Insert the blue plug of the jumper cable into the jump starter port on the SparkTank-20.
- Once connected, the indicator light on the smart clamp will turn green, indicating a safe connection. If it shows red or flashes, check the connections.
- Start kjøretøyets motor. Hvis den ikke starter umiddelbart, vent i 30 sekunder og prøv igjen. Ikke start i mer enn 3 sekunder per forsøk.
- Once the vehicle starts, immediately remove the blue plug from the jump starter unit.
- Deretter kobler du fra den svarte (-) kabelenamp, followed by the red (+) clamp fra kjøretøyets batteri.
Image: Promate SparkTank-20 smart clamps properly connected to a car battery for jump-starting.
6.2 Bruk som powerbank
The SparkTank-20 can charge various electronic devices using its USB-C and dual QC 3.0 USB-A ports.
- USB-C Port (45W Power Delivery): Connect your USB-C compatible device (e.g., laptop, tablet, smartphone) to the USB-C port using a USB-C to USB-C cable.
- Dual QC 3.0 USB-A Ports (18W Output): Connect your USB-A compatible device (e.g., smartphone, camera) to either of the QC 3.0 ports using a standard USB-A cable.
The device will automatically begin charging. The LCD display will show the output wattage.
Image: Promate SparkTank-20 simultaneously charging a tablet and a smartphone via its USB-C and QC 3.0 ports.
Image: Promate SparkTank-20 with an accessory connected to its 150W DC output port.
6.3 Bruke LED-lommelykten
The built-in LED flashlight has three modes: Normal, Strobe, and SOS.
- Press and hold the flashlight button for 3 seconds to turn on the flashlight in Normal mode.
- Press the flashlight button once to cycle through modes: Normal > Strobe > SOS.
- Press and hold the flashlight button for 3 seconds again to turn off the flashlight.
Image: Promate SparkTank-20 with its integrated LED flashlight illuminated.
7. Vedlikehold
7.1 Recharging the Unit
For optimal performance and longevity, recharge the SparkTank-20 after each use, especially after jump-starting a vehicle. It is recommended to fully charge the unit every 3-6 months even if not used, to maintain battery health.
7.2 Oppbevaring
Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the unit is fully charged before long-term storage.
7.3 Rengjøring
Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive materials. Ensure all ports are free of dust and debris.
8. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Kjøretøyet starter ikke. | Low battery on SparkTank-20. Incorrect cable connection. Vehicle battery completely dead. | Ensure SparkTank-20 is fully charged. Check cable connections for correct polarity. Consult a mechanic if the vehicle battery is severely damaged. |
| Smart klamp indicator light is red or flashing. | Incorrect connection (reverse polarity). Short circuit. Over-discharge protection activated. | Koble fra og koble til igjenamps ensuring correct polarity. Check for any metal contact between clamps. Allow the unit to cool down if it was recently used. |
| Devices not charging from USB ports. | SparkTank-20 battery is low. Cable issue. Device incompatibility. | Recharge the SparkTank-20. Try a different charging cable. Ensure your device is compatible with USB charging standards. |
| Enheten lader ikke. | Faulty charging cable or adapter. Port issue. | Try a different USB-C cable and wall adapter. Ensure the USB-C port is clean and free of debris. |
9. Spesifikasjoner
| Trekk | Spesifikasjon |
|---|---|
| Merke | Promote |
| Modellnummer | SparkTank-20 |
| Batterikapasitet | 20000 mAh |
| Toppstrøm | 2000 Amps |
| Voltage | 12 volt (DC) |
| Battericellesammensetning | Litium polymer |
| USB-C inngang/utgang | 45W strømforsyning |
| USB-A-utgang (QC 3.0) | Dual 18W Ports |
| DC-utgang | 150W |
| Varevekt | 1.8 kilo |
| Dimensjoner | 15.9 x 12.9 x 29.3 cm |
| Tjenestetype | Motorcycle, Passenger Car |
10. Garanti og støtte
Promate products are designed with quality and reliability in mind. For warranty information, please refer to the warranty card included in your product packaging or visit the official Promate website. If you encounter any issues or have questions regarding your SparkTank-20, please contact Promate customer support through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.