BRPOM BM600 Bilstarter Brukerhåndbok

1. Introduksjon

Thank you for choosing the BRPOM BM600 Car Jump Starter. This powerful and portable device is designed to jump start vehicles with up to 12.0L diesel or all gas engines, providing 8000 amps of peak current. It also functions as a portable power bank and an LED flashlight. Please read this manual thoroughly before use to ensure safe and effective operation.

2. Sikkerhetsinformasjon

WARNING: Read and understand all safety information before using this product. Failure to follow these safety instructions may result in electrical shock, explosion, fire, which may result in serious injury, death, or property damage.

• Do not operate the jump starter if it is damaged.
• Ikke start et frossent batteri.
• Sørg for riktig polaritetstilkobling (rød kabel)amp til positiv, svart klamp to negative). Reverse polarity can cause damage.
• Ikke la den røde og svarte clamps å ta på hverandre.
• Oppbevares utilgjengelig for barn.
• Brukes i et godt ventilert område.
• Ikke utsett produktet for vann, regn eller snø.
• Ikke demonter enheten. Overlat service til kvalifisert personell.
• Do not store the jump starter in temperatures exceeding 60°C (140°F).

3. Pakkens innhold

• BRPOM BM600 Car Jump Starter Unit
• Smart Jumper Clamps
• USB-C ladekabel
• Brukerhåndbok
• Oppbevaringsboks

4. Produktegenskaper og komponenter

Image: The BRPOM BM600 Car Jump Starter connected to smart clamps, ready for use. The device features an integrated LED light, a digital display, and control buttons. The smart clamps are shown with a voltage reading of 16.5V. The image highlights the device's capability of 8000A peak current for all gas and 12.0L diesel engines.

Nøkkelfunksjoner:

• 8000A toppstrøm: Capable of jump starting large engines.
• Batteri med høy kapasitet: 26800mAh internt batteri.
• Multifunksjonell: Jump starter, power bank, LED flashlight.
• Smart Clamps: Provides protection against reverse polarity, over-current, short-circuit, over-charge, and over-temperature.
• Digital skjerm: Shows battery level and operational status.

Komponent overview:

• Starthjelpport: Connects to the smart jumper clamps.
• USB-utgangsporter: For lading av mobile enheter.
• USB-C inngangsport: For lading av starthjelpen.
• LED lommelykt: Gir belysning med flere moduser.
• Power Button/Display: Activates the unit and shows status.
• Control Buttons (M, OK, +, -): For å navigere i menyer og justere innstillinger.

5. Lading av starthjelpen

Before first use, fully charge the BRPOM BM600. It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not in use.

1. Koble den medfølgende USB-C-ladekabelen til USB-C-inngangsporten på jumpstarteren.
2. Koble den andre enden av USB-C-kabelen til en USB-veggadapter (ikke inkludert) eller en billader.
3. The digital display will show the charging status. The unit is fully charged when the display indicates 100%.

6. Bruksanvisning: Start av kjøretøy med startkabler

Sørg for at starthjelpen er minst 50 % ladet før du prøver å starte et kjøretøy med starthjelp.

1. Connect Smart Clamps: Insert the blue plug of the smart jumper clamps into the jump start port on the BRPOM BM600. Ensure a firm connection.
2. Koble til bilbatteri: Fest den røde (+) clamp til den positive polen på kjøretøyets batteri og den svarte (-) polenamp til den negative terminalen.
3. Sjekk indikator: Observe the indicator light on the smart clamps. A solid green light indicates a correct connection and that the unit is ready to jump start. If a red light or no light appears, check connections and battery voltage.
4. Start kjøretøy: Once the green light is solid, start your vehicle's engine. If the engine does not start immediately, wait 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.
5. Fjern Clamps: Når kjøretøyet starter, fjern smartklokken umiddelbart.amps from the car battery, then disconnect the clamps fra jumpstarteren.

7. Bruk som powerbank

The BRPOM BM600 can charge various USB-powered devices such as smartphones, tablets, and cameras.

1. Koble enhetens USB-ladekabel til en av USB-utgangsportene på jumpstarteren.
2. The jump starter will automatically begin charging your device. The digital display will show the remaining battery level.
3. Koble fra enheten når ladingen er fullført.

8. Bruk av LED-lommelykten

The integrated LED flashlight has multiple modes for different situations.

1. Press and hold the flashlight button (often marked with a sun icon or similar) to turn on the steady light mode.
2. Press the button again to cycle through modes: steady light > strobe light > SOS signal > off.

9. Vedlikehold og lagring

• Rengjør enheten med en tørr, myk klut. Ikke bruk sterke kjemikalier eller slipende materialer.
• Store the jump starter in its protective case in a cool, dry place away from direct sunlight.
• Recharge the unit every 3-6 months to prolong battery life, even if not in use.
• Keep the jump start port and USB ports free from dust and debris.

10. Feilsøking

11. Spesifikasjoner

• Modell: BM600
• Topp Ampslette: 8000 Amps
• Batterikapasitet: 10 000 mAh (litiumpolymer)
• Voltage: 12 volt
• Motorkompatibilitet: Up to 12.0L Diesel / All Gas Engines
• Produktdimensjoner: 10.16 x 25.4 x 7.62 cm
• Varevekt: 839 g
• Driftstemperatur: -20℃ til 60℃

12. Garanti og støtte

BRPOM products are designed and manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For specific warranty details, technical support, or customer service inquiries, please refer to the warranty card included in your package or visit the official BRPOM website. Please have your model number (BM600) and purchase information ready when contacting support.