Nonstop NSO2-WFL USB-C Hotel Alarm Clock User Manual

Produkt overview

The Nonstop NSO2-WFL is a modern digital alarm clock designed for hotel environments, featuring a clear digital display and integrated USB-A and USB-C charging ports. Its compact design and intuitive controls make it suitable for bedside use, providing both timekeeping and convenient device charging.

Figur 1: Front view of the Nonstop NSO2-WFL alarm clock, showing the digital display and USB charging ports.

Oppsettveiledning

1. Utpakking og plassering

Carefully remove the alarm clock from its packaging. Place the clock on a stable, flat surface such as a bedside table or desk, ensuring it is within reach of a power outlet and has adequate ventilation.

Figur 2: The Nonstop NSO2-WFL alarm clock positioned on a bedside table.

2. Strømtilkobling

Connect the provided power adapter to the DC input port on the back of the alarm clock. Plug the other end of the adapter into a standard electrical wall outlet. The display should illuminate, indicating the clock is powered on and ready for use.

3. Innstilling av starttidspunkt

Upon first power-up, the clock may display a default time (e.g., 12:00 AM). Refer to the "Operating Instructions" section for detailed steps on how to set the current time and date accurately.

Bruksanvisning

1. Stille inn tid

1. Locate the "TIME SET" button, typically found on the back or bottom of the unit. Press and hold it until the hour digits on the display begin to flash.
2. Use the "HOUR" and "MINUTE" adjustment buttons (often labeled with arrows or +/- symbols) to set the correct hour and minute.
3. Press the "TIME SET" button again to confirm the time and exit the time setting mode.

2. Stille inn alarmen

1. Press and hold the "ALARM SET" button until the alarm hour digits flash on the display.
2. Adjust the desired alarm hour and minute using the respective adjustment buttons.
3. Press "ALARM SET" again to confirm the alarm time.
4. To activate or deactivate the alarm, press the "ALARM ON/OFF" button. An alarm icon will appear on the display when the alarm is active.

3. Snooze-funksjon

When the alarm sounds, press the large "SNOOZE" button (usually located on the top of the clock) to temporarily silence the alarm for approximately 9 minutes. The alarm will sound again after the snooze period has elapsed.

4. Justering av displayets lysstyrke

The display brightness can be adjusted to suit your preference. Locate the "DIMMER" or "BRIGHTNESS" button, typically on the back or side of the unit. Press it repeatedly to cycle through different brightness levels.

5. Bruk av USB-ladeporter

The clock features one USB-A port and one USB-C port on the front for convenient charging of mobile devices. Simply connect your device's charging cable to the appropriate port. Ensure the clock is powered on for the charging functionality to work.

Vedlikehold

Rengjøring

To clean the clock, gently wipe the surfaces with a soft, dry cloth. Avoid using abrasive cleaners, waxes, or solvents as they may damage the finish. Always ensure the clock is unplugged from the power outlet before cleaning.

Lagring

If storing the clock for an extended period, unplug it from the power outlet and store it in a cool, dry place, away from direct sunlight and extreme temperatures.

Feilsøking

Spesifikasjoner

• Merke: NONSTOP
• Modell: NSO2-WFL
• Farge: Valnøtt
• Visningstype: Digital
• Spesielle funksjoner: Alarm, USB-A Charging Port, USB-C Charging Port
• Produktdimensjoner: 1 cm B x 1 cm H (Note: This dimension may refer to a specific component or be a placeholder. Actual product dimensions are typically larger.)
• Strømkilde: Elektrisk (strømadapter)
• Innendørs/utendørs bruk: Innendørs
• Materiale: Valnøtt tre
• Varevekt: 2 pund
• Produsent: Nonstop

Garanti og støtte

For warranty information, technical support, or assistance with your Nonstop NSO2-WFL alarm clock, please contact NONSTOP customer service. Refer to the product packaging or the official NONSTOP webnettstedet for de mest oppdaterte kontaktopplysningene og støtteressursene.

Note: Please retain your purchase receipt as proof of purchase for any warranty claims or service requests.