SHARP AQUOS Sound Partner Bluetooth-halshøyttaler AN-SX8 brukerhåndbok

1. Introduksjon

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Produktet er overview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

Figur 1: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Oppsett

3.1 Lading av enheten

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Slå på/av

• To power on: Press and hold the Power button for approximately 3 seconds until the indicator light flashes.
• Slik slår du av: Trykk og hold inne av/på-knappen i omtrent 3 sekunder til indikatorlampen slukkes.

3.3 Første Bluetooth-paring

1. Ensure the AN-SX8 is powered off.
2. Press and hold the Power button for approximately 5-7 seconds until the indicator light flashes rapidly, indicating pairing mode.
3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
4. Select "AN-SX8" from the list of found devices.
5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Bruksanvisning

4.1 Bluetooth-tilkobling

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 AUX-tilkobling

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Volumkontroll

• Trykk på Volum opp (+) for å øke volumet.
• Trykk på Volum ned (-) knappen for å redusere volumet.

4.4 Avspillingskontroll (Bluetooth-modus)

• Trykk på Spill av/pause button once to play or pause audio.
• Dobbelttrykk på Spill av/pause for å hoppe til neste spor.
• Trippeltrykk på Spill av/pause for å gå til forrige spor.

4.5 Call Handling (Bluetooth Mode)

• Trykk på Spill av/pause én gang for å svare på et innkommende anrop.
• Trykk på Spill av/pause button once during a call to end it.
• Trykk og hold inne Spill av/pause i 2 sekunder for å avvise et innkommende anrop.

5. Vedlikehold

5.1 Rengjøring

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Oppbevaring

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Batteristell

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Feilsøking

• Ingen strøm: Ensure the device is fully charged. Connect it to a power source and check the charging indicator.
• Ingen lyd:
  • Check the volume level on both the AN-SX8 and your connected device.
  • Ensure the device is correctly paired via Bluetooth or the AUX cable is securely connected.
  • If using Bluetooth, try disconnecting and re-pairing the device.
• Problemer med Bluetooth-tilkobling:
  • Ensure the AN-SX8 is in pairing mode or discoverable.
  • Move the AN-SX8 closer to your Bluetooth device.
  • Slå av og på Bluetooth på kildeenheten din.
  • Clear the AN-SX8 from your device's Bluetooth list and re-pair.
• Forvrengt lyd:
  • Reduce the volume on both the AN-SX8 and your connected device.
  • Ensure there are no obstructions or interference between the AN-SX8 and your Bluetooth device.
  • Sjekk lydkilden for kvalitetsproblemer.

7. Spesifikasjoner

8. Sikkerhetsinformasjon

• Ikke utsett enheten for vann, fuktighet eller ekstreme temperaturer.
• Unngå langvarig lytting på høyt volum for å forhindre hørselsskade.
• Ikke forsøk å demontere, reparere eller modifisere enheten.
• Oppbevares utilgjengelig for barn og kjæledyr.
• Dispose of the device and its battery responsibly according to local environmental regulations.

9. Garanti og støtte

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

For ytterligere hjelp, vennligst besøk SHARP Support Webnettstedet (eksamplenken, den faktiske lenken kan variere).