Gembird PRO0453506

Gembird PRO0453506 Adjustable Desk Dual Monitor Mounting Arm User Manual

Modell: PRO0453506

1. Introduksjon

Thank you for choosing the Gembird PRO0453506 Adjustable Desk Dual Monitor Mounting Arm. This product is designed to enhance your workspace by providing an ergonomic and flexible solution for mounting two flat-panel displays ranging from 17 to 32 inches, each weighing up to 8 kg. This manual provides essential information for safe installation, operation, and maintenance of your monitor arm.

Gembird PRO0453506 product packaging

Image 1.1: Gembird PRO0453506 Product Packaging. The image shows the retail box for the adjustable desk 2-display mounting arm, highlighting its key features and design.

Gembird PRO0453506 dual monitor arm in use

Image 1.2: Gembird PRO0453506 Dual Monitor Arm in Use. This image displays the monitor arm installed on a desk, supporting two flat-panel monitors, demonstrating its ergonomic benefits in a typical office setup.

2. Sikkerhetsinformasjon

Les alle instruksjonene nøye før installasjon og bruk. Unnlatelse av å følge disse instruksjonene kan føre til materielle skader, alvorlig personskade eller død.

  • Ensure your desk surface is strong enough to support the combined weight of the monitor arm and two monitors.
  • Do not exceed the maximum weight capacity of 8 kg (17.6 lbs) per arm.
  • This product is designed for flat-panel displays between 17 and 32 inches.
  • Use only the provided hardware. If any parts are missing or damaged, contact your retailer for replacement.
  • Keep children and pets away during installation. Small parts can be a choking hazard.
  • Always have two people assist with lifting and positioning heavy monitors.
  • Ikke stram skruene for hardt, da dette kan forårsake skade.
  • After installation, ensure all connections are secure and stable before use.

3. Pakkens innhold

Please verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, please contact your supplier.

  • Dobbel skjermarmmontering
  • Skrivebord Clamp Base
  • Grommet Mount Base (optional)
  • VESA Plate Adapters (2x)
  • Maskinvaresett (skruer, skiver, unbrakonøkler)
  • Kabelhåndteringsklipp
  • Bruksanvisning

4. Oppsett og installasjon

4.1 Velg monteringsalternativ

The Gembird PRO0453506 supports two installation methods: desk clamp eller maljefeste. Velg alternativet som passer best til skrivebordet ditt.

4.1.1 skrivebord klamp Installasjon

  1. Fest skrivebordet clamp base to the main pole.
  2. Plasser clamp on the edge of your desk (suitable for desk thickness 10-80mm).
  3. Stram til clamp screw until the base is securely fastened to the desk.

4.1.2 Grommet Mount Installation (Optional)

  1. If your desk has a grommet hole (suitable for desk thickness 10-40mm), use the grommet mount base.
  2. Før hovedstangen gjennom maljehullet.
  3. Secure the base from underneath the desk using the provided plate and screw.

4.2 Attaching the Monitor Arms

  1. Slide the monitor arms onto the main pole.
  2. Adjust the height of each arm as desired and secure them with the locking mechanism.

4.3 Attaching Monitors to VESA Plates

  1. Attach the VESA plate adapters to the back of your monitors using the appropriate screws from the hardware kit. The arm supports VESA patterns of 75x75mm and 100x100mm.
  2. Carefully slide the monitors (with VESA plates attached) onto the monitor arms until they click into place. Ensure they are securely locked.

4.4 Kabelhåndtering

Route your monitor cables through the integrated cable management clips on the arms and down the main pole for a tidy workspace.

Gembird PRO0453506 cable management

Image 4.1: Gembird PRO0453506 Cable Management. This side view illustrates how cables can be neatly routed along the monitor arm for an organized setup.

5. Betjening og justering

The Gembird PRO0453506 offers a wide range of adjustments to achieve your optimal viewopplevelse.

  • Høydejustering: Loosen the locking mechanism on the main pole to slide the arms up or down. Re-tighten to secure.
  • Tilt: The monitor can be tilted +90° to -45° (up/down) to reduce glare and improve viewing vinkler.
  • Sving: Each arm can swivel ±180° at the pole and ±135° at the elbow joint, allowing you to share your screen or adjust for different tasks.
  • Rotasjon: Rotate your monitor 360° from landscape to portrait orientation.
  • Spenningsjustering: If a monitor sags or is difficult to move, use the provided Allen key to adjust the tension screw on the arm joints. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Forsiktighet: Do not fully loosen tension screws without understanding the mechanism, as internal springs may disengage, requiring professional reassembly. Refer to the detailed diagrams for specific adjustment points.
Gembird PRO0453506 dimensions and adjustment ranges

Image 5.1: Gembird PRO0453506 Dimensions and Adjustment Ranges. This technical drawing illustrates the various dimensions, tilt, swivel, and rotation capabilities of the monitor arm, including VESA plate sizes (75mm, 100mm) and desk clamp/grommet mount ranges.

6. Vedlikehold

Regelmessig vedlikehold sikrer levetiden og optimal ytelse for skjermarmen din.

  • Rengjøring: Tørk av overflaten på skjermarmen med en myk klutamp klut. Unngå slipende rengjøringsmidler eller løsemidler.
  • Periodiske kontroller: Sjekk alle skruer og tilkoblinger med jevne mellomrom for å sikre at de forblir stramme og sikre. Stram til om nødvendig.
  • Smøring: No lubrication is typically required for the moving parts. If you notice stiffness, ensure no debris is obstructing the joints.

7. Feilsøking

  • Skjermen henger eller holder ikke posisjonen: The tension spring may need adjustment. Use the provided Allen key to turn the tension screw clockwise to increase tension. Ensure the monitor weight is within the 8 kg limit per arm.
  • Monitor is difficult to move: The tension may be too high. Turn the tension screw counter-clockwise to decrease tension.
  • Arm feels loose at the desk clamp: Stram skrivebordsklemmen igjenamp screw firmly. Ensure the desk thickness is within the specified range (10-80mm for clamp, 10-40mm for grommet).
  • Monitor does not attach securely to VESA plate: Ensure the VESA plate is correctly aligned and fully engaged with the arm's mounting mechanism. Verify that the VESA screws are appropriate for your monitor and securely tightened.
  • Accidental spring release during adjustment: If a tension screw is fully loosened, an internal spring may disengage. This requires careful reassembly, often best handled by a qualified technician or by contacting Gembird support. Avoid fully loosening tension screws unless explicitly instructed.

8. Spesifikasjoner

  • Modellnummer: PRO0453506
  • Merke: Gembird
  • Materiale: Metall
  • Monteringstype: Table Mount (Desk Clamp eller malje)
  • Bevegelsestype: Tiltable, Swivel, Rotational
  • Compatible Screen Size: 17–32 tommer
  • Maksimal vektkapasitet: 8 kg (17.6 lbs) per arm
  • VESA-kompatibilitet: 75x75mm, 100x100mm
  • Skrivebord Clamp Tykkelse: 10–80 mm
  • Grommet Mount Thickness: 10–40 mm
  • Varevekt: 3800 gram
  • Farge: Multicolored (typically black/grey)

9. Garanti og støtte

For warranty information, technical support, or to inquire about replacement parts, please contact your retailer or visit the official Gembird website. Please have your model number (PRO0453506) and purchase details ready when contacting support.

© 2023 Gembird. Alle rettigheter forbeholdt.