Introduksjon
VECTOR SS16LV 1600 Peak Amp Li-Ion Jump Starter Portable is a compact and powerful device designed for jump-starting vehicles and charging mobile devices. It features integrated reverse polarity protection for safe operation and a built-in work light for convenience in low-light conditions. Its lithium-ion battery can hold a charge for up to 12 months, making it a reliable emergency tool.
Figure 1: The VECTOR SS16LV 1600 Peak Amp Lithium Jump Starter with its heavy-duty powder-coated clamps.
Sikkerhetsinformasjon
Les og forstå alltid alle sikkerhetsadvarsler og instruksjoner før du bruker dette produktet. Unnlatelse av å følge advarslene og instruksjonene kan føre til elektrisk støt, brann og/eller alvorlig skade.
- Oppbevares utilgjengelig for barn.
- Do not expose the jump starter to rain or wet conditions.
- Ensure proper polarity connection to avoid damage to the device or vehicle. The Engine Start Smart Controller provides reverse polarity protection.
- Do not disassemble the unit. Refer all servicing to qualified service personnel.
- Oppbevares på et kjølig, tørt sted når den ikke er i bruk.
Figure 2: The Reverse Polarity Alarm feature ensures safe connections.
Hva er i esken
Kontroller at alle komponenter er til stede og i god stand:
- VECTOR SS16LV Lithium Jump Starter Unit
- Smart Controller with Powder Coated Metal Clamps (Rød og svart)
- AC lader
- DC-lader
- USB ladekabel
Figure 3: Included components: Jump Starter, Smart Controller, AC and DC Chargers, and USB Charging Cable.
Produktfunksjoner
- 1600 Topp Amps: Instantly jump starts cars and trucks up to 8-cylinders.
- USB-lader: Equipped with USB Type-A & Type-C (3.1 Amp) ports for charging mobile devices.
- Oppladbart litiumbatteri: Retains charge for up to 12 months. Comes with AC, DC, and USB adapters for versatile recharging.
- Sikker drift: The Engine Start Smart Controller provides reverse polarity protection, ensuring correct jumper cable connection.
- Bærbar design: Compact size (3"D x 1"W x 7"H) and lightweight (12.8 ounces) for easy storage and transport.
- LED arbeidslys: Built-in LED light assists in dark environments.
Figure 4: Key features of the SS16LV Jump Starter.
Figure 5: Compact dimensions and lightweight design for portability.
Figure 6: Labeled components of the SS16LV unit and accessories.
Figur 7: Side view showing the protected input/output ports.
Oppsett
Opprinnelig lading
Before first use, fully charge the VECTOR SS16LV jump starter. The unit comes partially charged from the factory.
- Connect the provided AC charger to a standard wall outlet.
- Plug the USB charging cable into the AC charger and then into the USB-C input port on the jump starter.
- The blue LED indicator lights on the jump starter will illuminate and flash to indicate charging. All three lights will be solid blue when fully charged.
- Alternatively, use the DC charger to charge the unit from a vehicle's 12V accessory outlet.
It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, especially if not used regularly.
Bruksanvisning
Hoppstart av et kjøretøy
The VECTOR SS16LV is designed to jump start vehicles with up to 8-cylinder engines.
- Sørg for at startmotoren er fulladet.
- Connect the Smart Controller's plug into the jump starter's dedicated port (usually covered by a red flap).
- Koble til den røde (+) clamp til den positive (+) polen på kjøretøyets batteri.
- Koble til den svarte (-) clamp to the negative (-) terminal of the vehicle's battery or a solid, unpainted metal part of the vehicle's chassis away from the battery.
- Observe the indicator light on the Smart Controller. A solid green light indicates a correct connection and readiness to start. If a red light or alarm sounds, check connections for reverse polarity.
- Start kjøretøyet.
- Når kjøretøyet starter, koble fra cl-en umiddelbart.amps from the vehicle battery, first the black (-) clamp, deretter den røde (+) kl.amp.
- Disconnect the Smart Controller from the jump starter.
Using as a Power Bank (USB Charging)
The SS16LV can charge various USB-powered devices.
- Open the protective flap covering the USB ports on the jump starter.
- Connect your device's USB charging cable to either the USB Type-A or USB Type-C (3.1 Amp) port on the jump starter.
- Koble den andre enden av kabelen til den mobile enheten.
- Press the power button on the jump starter to begin charging. The blue LED lights indicate the remaining battery level.
- Koble fra enheten når ladingen er fullført.
Figure 8: Charging a mobile device using the USB port.
Bruk av LED-arbeidslyset
The built-in LED work light provides illumination in dark conditions.
- Press the power button once to check the battery level (blue LEDs).
- Press the power button a second time to turn on the LED work light.
- Press the power button a third time to activate the SOS flash mode.
- Press the power button a fourth time to activate the strobe light mode.
- Press the power button a fifth time to turn off the light.
Figure 9: The integrated LED work light provides illumination.
Vedlikehold
- Rengjøring: Tørk av enheten med en tørr, myk klut. Ikke bruk slipende rengjøringsmidler eller løsemidler.
- Lagring: Store the jump starter in a cool, dry place away from direct sunlight and moisture. Ensure it is fully charged before storing for extended periods.
- Batteripleie: Recharge the unit every 3-6 months to prolong battery life, even if not used.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Starthjelpen slår seg ikke på. | Batteriet er helt utladet. | Charge the jump starter fully using the provided AC or DC charger. |
| Kjøretøyet starter ikke med startkabler. | Feil clamp tilkobling (omvendt polaritet). Bilbatteriet er alvorlig skadet. Jump starter battery is low. | Ensure correct positive (+) and negative (-) connections; the Smart Controller will indicate errors. Check jump starter battery level and recharge if necessary. Consult a professional if vehicle battery is faulty. |
| USB-enheter lader ikke. | Jump starter is off. USB-kabelen er defekt. Enheten er ikke kompatibel. | Press the power button to activate USB output. Try a different USB cable. Ensure your device is compatible with USB charging. |
| LED work light not working. | Jump starter is off. Batteriet er helt utladet. | Press the power button multiple times to cycle through light modes. Charge the jump starter. |
Spesifikasjoner
- Modell: SS16LV
- Merke: VEKTOR
- Topp utgangsstrøm: 1600 Amps
- Ampslette: 1600 Amps
- Produktdimensjoner: 3" D x 1" B x 7" H
- Varevekt: 12.8 unser
- Batteritype: Litiumion (1 nødvendig)
- USB-utgang: USB Type-A & Type-C (3.1 Amps)
- Produsent: Baccus Global LLC
- UPC: 814632015246
Garanti og støtte
For garantiinformasjon eller teknisk støtte, vennligst se produsentens offisielle webnettstedet eller kontakt kundeservicen deres. Ta vare på kjøpskvitteringen som kjøpsbevis.
Produsent: Baccus Global LLC
For ytterligere hjelp, besøk VECTOR-butikk på Amazon.