Yaheetech Modern Faux Leather Office Chair Instruction Manual

1. Introduksjon

Thank you for choosing the Yaheetech Modern Faux Leather Office Chair. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new chair. Please read these instructions carefully before use and retain them for future reference.

Viktig sikkerhetsinformasjon:

• This chair has a maximum weight capacity of 300 lbs (136 kg). Do not exceed this limit.
• Sørg for at alle komponenter er godt festet før bruk.
• Hold barn og kjæledyr unna monteringsområdet.
• Bruk stolen på en flat, stabil overflate.

2. Pakkens innhold

Please verify that all parts are present before beginning assembly. Refer to the included parts list in your package for detailed component identification.

3. Monteringsinstruksjoner

Assembly of your Yaheetech office chair is straightforward and requires only a few steps. All necessary hardware and tools are provided.

Step 1: Prepare the Gas Lift

Before attaching the gas lift to the chair mechanism, it is crucial to remove the black plastic protective cap from the top of the gas lift cylinder. Failure to do so will prevent the chair's height adjustment function from working correctly.

Figure 3.1: Removing the black plastic cap from the gas lift.

Step 2: Attach Casters to the Base

Insert the five heavy-duty caster wheels into the openings at the ends of the chair base. Push firmly until they click into place.

Step 3: Insert Gas Lift into the Base

Plasser gassløftesylinderen i det midtre hullet på den monterte stolbasen.

Step 4: Attach Mechanism to the Seat

Align the chair mechanism with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws and the Allen wrench. Ensure the front of the mechanism faces the front of the seat.

Step 5: Connect Seat to Gas Lift

Carefully place the assembled seat (with mechanism attached) onto the top of the gas lift cylinder. Press down firmly to secure the connection.

Monteringsvideoveiledning:

4. Bruksanvisning

Your Yaheetech office chair is designed for comfort and adjustability to suit your needs.

Høydejustering

To adjust the seat height, pull the lever located under the seat upwards. While holding the lever, stand up to raise the seat or sit down to lower it. Release the lever to lock the height in place.

Tilt Function and Tension

The chair features a center-tilt mechanism allowing you to rock back and forth between 90-110 degrees. To activate the rocking motion, pull out the lever located under the seat. Push the lever in to lock the chair in an upright position.

You can adjust the tilt tension by turning the round knob beneath the seat. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).

Figure 4.1: Adjusting the tilt tension and activating the rocking function.

360° sving og mobilitet

The chair offers a full 360° swivel for easy rotation. The five caster wheels provide smooth and quiet mobility across various floor surfaces.

Figure 4.2: Features including gas lift, stable base, and swivel wheels.

Ergonomisk design

This chair features an ergonomic shape with a 14.6-inch high backrest for mid-back and lower back support, reducing fatigue. The curved, padded armrests provide comfortable support for your arms.

Figure 4.3: Thoughtful ergonomic design for optimal body support.

Wide Seat Cushion

The extra-large seat cushion, measuring 18.7 inches wide and 18.7 inches deep, offers ample space for comfortable seating and flexibility.

Figure 4.4: Benefits of the extra-wide seat cushion.

5. Vedlikehold

To ensure the longevity and appearance of your chair, follow these simple maintenance guidelines:

• Rengjøring: Tørk av med annonseamp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the faux leather.
• Regelmessige kontroller: Sjekk regelmessig alle skruer og bolter for å sikre at de er stramme. Stram til om nødvendig.
• Unngå direkte sollys: Langvarig eksponering for direkte sollys kan føre til at kunstskinnet falmer eller sprekker.

6. Feilsøking

Hvis du støter på problemer med stolen din, kan du se følgende vanlige løsninger:

• Stol justerer ikke høyden: Ensure the black plastic cap has been removed from the gas lift cylinder (refer to Assembly Step 1). Check if the height adjustment lever is fully engaged.
• Stolens vingler: Verify that all screws and bolts are securely tightened. Ensure the chair is on a flat, even surface.
• Hjulene ruller ikke jevnt: Check for any debris or hair caught in the caster wheels. Clean them if necessary.
• Difficulty reclining/rocking: Adjust the tilt tension knob under the seat. Turn counter-clockwise to loosen the tension. Ensure the tilt lever is pulled out to enable rocking.

Hvis problemet vedvarer, vennligst kontakt kundestøtte.

7. Spesifikasjoner

Figure 7.1: Chair dimensions and weight capacity.

8. Garanti og støtte

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Yaheetech webnettstedet. Vårt kundeserviceteam er tilgjengelig for å hjelpe deg med eventuelle spørsmål eller bekymringer.