1. Introduksjon
Thank you for choosing the OREiN 4500LM/30W Hardwired Motion Sensor LED Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Sikkerhetsinformasjon
ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringen eller sikringsbryteren før installasjon eller service.
- Installation must be performed by a qualified electrician or person familiar with the construction and operation of the product and the hazards involved.
- Sørg for at forsyningsvoltage er riktig (120 V AC).
- Ikke installer i nærheten av brennbare materialer.
- Bruk vernebriller og hansker under installasjon.
- This fixture is designed for outdoor use and is IP65 waterproof rated.
3. Pakkens innhold
Kontroller at alle komponenter er til stede før installasjonen starter:
- Lysarmatur (1)
- Monteringsbrakett (1)
- Skruer (forskjellige størrelser)
- Trådmuttere (3)
- Bruksanvisning (1)
4. Produktet er overview
The OREiN Flood Light features three adjustable LED heads and a motion sensor for comprehensive outdoor illumination and security.
Figur 1: Foran view of the OREiN 4500LM/30W Hardwired Motion Sensor LED Flood Light, showing the three adjustable light heads and the motion sensor below.
Figure 2: Diagram illustrating the flexible adjustment angles of the three light heads (340°) and the motion sensor (270° horizontally, 120° vertically).
5. Installasjon
This flood light is designed for hardwired installation on a standard junction box (2.75” / 3.5”). It supports both wall and eave mounting.
Installasjonstrinn:
- Slå av strømmen: Disconnect power at the circuit breaker before starting.
- Sikker monteringsbrakett: Attach the metal mounting bracket to your existing junction box using the provided screws.
- Koble til ledninger: Connect the household wiring to the fixture wires using the provided wire nuts. Typically, black to black (live), white to white (neutral). This light belongs to secondary luminaires, so no extra ground wire connection is needed.
- Sikre lysarmaturen: Align the light fixture with the mounting bracket and secure it with the appropriate screws.
- Insert Waterproof Plug: Ensure the waterproof plug is properly inserted to prevent moisture ingress.
- Juster lyshoder og sensor: Position the three light heads and the motion sensor to cover the desired areas.
- Gjenopprett kraften: Slå på strømmen igjen ved strømbryteren.
Figure 3: Step-by-step diagram for hardwired installation, showing mounting bracket, wire connections, and securing the fixture.
Figur 4: Eksamples of wall-mounted and soffit-mounted installations for the flood light.
6. Driftsmåter
The OREiN Flood Light offers three operational modes, selectable via a switch on the motion sensor unit:
- Testmodus: The light turns on for 5 seconds when motion is detected, regardless of ambient light. Useful for testing sensor coverage during installation.
- Dusk to Dawn (D2D) Mode: The light automatically turns on at night and off during the day. In this mode, the motion sensing function is inactive.
- Automatisk modus: The light turns on only at night when motion is detected. The duration the light stays on (1, 5, or 10 minutes) can be adjusted.
Figure 5: Visual representation of Test, Dusk to Dawn, and Auto modes in operation.
Figure 6: Illustration of the Dusk to Dawn mode, showing the light automatically activating when surroundings are dark and deactivating when bright.
7. Justere innstillinger
The motion sensor unit includes dials for adjusting the light's duration and sensitivity:
- Time Adjustment (Timer Minutes): Set the duration the light stays on after motion detection in Auto Mode (1, 5, or 10 minutes).
- Sensitivity Adjustment (Sensitivity): Adjust the motion detection range (10ft, 20ft, 30ft, 40ft). Max setting provides up to 40ft detection.
Figure 7: Close-up of the motion sensor with dials for adjusting mode, timer minutes, and sensitivity.
Video 1: Official OREiN video demonstrating the motion sensor outdoor lights, including features like wide detection, adjustable sensing distance, heat dissipation, adjustable time/sensitivity, flexible adjustment, and easy installation.
8. Vedlikehold
- Rengjøring: Rengjør armaturet med en myk, damp klut. Ikke bruk skurende rengjøringsmidler eller løsemidler.
- Undersøkelse: Periodically check for any damage to the wiring or housing.
- Bytte av pære: The LED bulbs are integrated and not user-replaceable. The fixture has a lifespan of up to 50,000 hours.
Figure 8: Illustration demonstrating the IP65 waterproof rating, showing the light functioning reliably under rain.
Figure 9: Diagram showing the heat dissipation design of the light heads, contributing to the product's longevity.
9. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Lyset tennes ikke. | No power; incorrect wiring; sensor settings. | Check circuit breaker. Verify wiring connections. Adjust sensor mode/sensitivity. |
| Lyset forblir på kontinuerlig. | Sensor in D2D mode; continuous motion detected; sensitivity too high. | Switch to Auto mode. Check for constant heat sources or movement in detection zone. Reduce sensitivity. |
| Lyset tennes i løpet av dagen. | Sensor in Test mode; ambient light sensor blocked. | Switch to Auto or D2D mode. Ensure the ambient light sensor is not obstructed. |
| Motion detection range is too short/long. | Sensitivity setting incorrect. | Adjust the sensitivity dial on the motion sensor. |
10. Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modellnavn | OL3600354 |
| Merke | OREiN |
| Lysstyrke | 4500 lumen |
| Wattage | 30 watt |
| Fargetemperatur | 5000 Kelvin (dagslys) |
| Voltage | 120 volt |
| Materiale | Akrylnitrilbutadienstyren (ABS) |
| Vannmotstandsnivå | IP65 vanntett |
| Bevegelsesdeteksjonsvinkel | 240° |
| Bevegelsesdeteksjonsavstand | Opp til 40 fot |
| Lyshodejustering | 340° dekning |
| Estimert levetid | 50,000 timer |
| Installasjonstype | Hardwired (Wall Mount, Eave Mount) |
| Produktdimensjoner | 7.6 cm L x 8 cm B x 6 cm H |
| Varevekt | 1.87 pund |
11. Garanti og støtte
OREiN offers an extended warranty for this product. For specific warranty details, please refer to the product packaging or contact OREiN customer support.
Kundestøtte:
- For assistance, contact OREiN directly through Amazon or search for the brand name online.
- If you encounter any issues, it is recommended to contact customer support before initiating a return.
Figure 10: Image representing OREiN customer support, available for assistance.