1. Introduksjon
This manual provides instructions for the assembly, operation, and maintenance of your Tribesigns C-Shaped 3-Tier End Table, Model XD-627. This industrial-style side table features a rustic brown finish and a unique C-shaped design, making it suitable for various living spaces as a side table, snack table, or bedside table.
Image 1.1: Tribesigns C-Shaped 3-Tier End Table, showcasing its rustic brown finish and industrial design.
2. Sikkerhetsinformasjon
Les og forstå alle sikkerhetsinstruksjoner før montering og bruk. Unnlatelse av å følge disse instruksjonene kan føre til personskade eller skade på produktet.
- Vektgrense: Do not exceed the maximum weight recommendation of 150 pounds (68 kg) for the entire table. Distribute weight evenly across the shelves.
- Forsamling: Hold alle små deler og emballasjematerialer unna barn under montering for å unngå kvelningsfare.
- Stabilitet: Ensure the table is placed on a flat, level surface. Use the adjustable feet to stabilize the table and prevent wobbling.
- Klemmepunkter: Be aware of potential pinch points during assembly and when moving the table.
- Tippfare: Do not allow children to climb on the table. Secure the table if there is any risk of tipping, especially in households with children or pets.
3. Pakkens innhold
Before beginning assembly, verify that all parts listed in your product's assembly guide are present and undamaged. Refer to the detailed parts list provided in your product packaging. Typical components include:
- Engineered Wood Shelves (Top, Middle, Bottom)
- Metal Frame Components (C-shaped tubes)
- Justerbare fotputer
- Monteringsutstyr (skruer, bolter, unbrakonøkkel)
Hvis noen deler mangler eller er skadet, vennligst kontakt kundestøtte umiddelbart.
4. Oppsett og montering
Assembly is required for this product. It is recommended for one person to assemble the table. A screwdriver is the only tool recommended for assembly, in addition to any included Allen wrench.
Monteringstrinn:
- Pakke ut: Carefully remove all components from the packaging. Lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches.
- Identifiser deler: Match each component to the parts list in your assembly guide. Ensure all hardware is present.
- Følg instruksjonene: Refer to the step-by-step, numbered instructions provided in your product's specific assembly guide. These instructions will detail the order and method for attaching the metal frame to the engineered wood shelves.
- Sikre tilkoblinger: Hand-tighten all screws and bolts initially. Once all components are in place, go back and fully tighten all fasteners with the provided Allen wrench and your screwdriver. Do not overtighten.
- Fest fotputer: Screw the adjustable foot pads into the bottom of the metal frame.
- Sluttsjekk: Gently shake the assembled table to ensure it is stable. Adjust the foot pads as needed to eliminate any wobbling.
Image 4.1: Dimensional diagram of the assembled table, showing overall height, width, depth, and shelf spacing.
5. Drift (bruk)
Your Tribesigns C-Shaped 3-Tier End Table is designed for versatile use in various indoor settings.
- Plassering: The C-shaped design allows the table to slide under a sofa, armchair, or bed, bringing the top surface closer for convenience.
- Lagring: Utilize the three tiers for organizing items such as books, magazines, remote controls, snacks, drinks, or decorative pieces.
- Overflatebruk: The top surface is ideal for holding laptops, tablets, coffee cups, or small lamps.
Image 5.1: The end table positioned next to a sofa, demonstrating its practical use for holding various items.
6. Vedlikehold
Riktig stell vil bidra til å opprettholde utseendet og levetiden til endebordet ditt.
- Rengjøring: Tørk av overflatene med adamp cloth, then immediately dry with a clean, dry cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish.
- Søl: Tørk opp søl umiddelbart for å forhindre flekker, spesielt på konstruerte treflater.
- Festemidler: Sjekk alle skruer og bolter med jevne mellomrom for å sikre at de sitter godt fast. Stram til om nødvendig for å opprettholde stabiliteten.
- Miljø: Avoid placing the table in direct sunlight or near heat sources, which can cause fading or warping.
7. Feilsøking
Hvis du støter på problemer med sidebordet, kan du se følgende vanlige løsninger:
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Bordet er ustø | Ujevnt gulv; løse fester | Adjust the foot pads until stable. Check and tighten all assembly screws. |
| Delene passer ikke sammen | Incorrect orientation; wrong parts | Review the assembly guide to ensure parts are oriented correctly. Verify you are using the correct parts for each step. |
| Manglende maskinvare eller skadede deler | Packaging error; shipping damage | Do not proceed with assembly. Contact customer support for replacement parts. |
8. Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Merke | Stammetegn |
| Modellnummer | XD-627 |
| Produktdimensjoner (D x B x H) | 30 cm x 60 cm x 65 cm (11.81 x 23.62 x 25.59 tommer) |
| Varevekt | 19.5 pund (8.85 kg) |
| Anbefalt maksimal vekt | 150 pund (68 kg) |
| Rammemateriale | Metall |
| Topp materiale | Konstruert tre |
| Farge | Rustikk brun |
| Antall hyller | 3 |
| Montering påkrevd | Ja |
| Anbefalte forsamlingspersoner | 1 |
| Verktøy anbefales for montering | Skrujern |
| Produktpleieinstruksjoner | Tørk med Damp Klut, tørk av med tørr klut |
Image 8.1: Key features of the table, including the thickened tabletop, strong metal frame, and adjustable foot pads for stability.
9. Garanti og støtte
This Tribesigns C-Shaped 3-Tier End Table comes with a ONE-YEAR limited warranty fra kjøpsdatoen. Denne garantien dekker produksjonsfeil og materialfeil ved normal bruk.
Garantien dekker ikke:
- Damage caused by improper assembly or installation.
- Damage resulting from misuse, abuse, neglect, or accidents.
- Normal slitasje.
- Skader fra uautoriserte reparasjoner eller modifikasjoner.
For warranty claims, missing parts, or any other product support inquiries, please contact Tribesigns customer service. Have your model number (XD-627) and proof of purchase ready when contacting support.