Introduksjon
This manual provides essential information for the safe and effective use of your ACEZUK M01 Portable Car Jump Starter with Air Compressor. This device is designed to provide emergency jump-starting for 12V vehicles, inflate tires, and serve as a portable power bank and flashlight.
Hva er inkludert
- 1x ACEZUK M01 Jump Starter with Air Compressor
- 1x Smart Jumper Cables
- 1x Air Pump Hose
- 4x Gas Nozzles
- 1x USB-C ladekabel
- 1x brukerveiledning
- 1x Portable EVA Carrying Case
Sikkerhetsinformasjon
Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Always ensure proper polarity when connecting jumper cables (red to positive, black to negative).
- Do not use the air pump function continuously for extended periods to prevent overheating. Allow the device to cool down if it becomes hot.
- Hold enheten unna barn.
- Ikke utsett enheten for regn eller våte forhold.
- Ikke prøv å starte et frossent batteri.
- It is suggested to start the car when the jump starter's power is greater than 25%.
Oppsett
Innledende lading
Upon first receiving the ACEZUK M01, fully charge the unit using the provided USB-C charging cable. Although the device may show a full charge, an initial full charge is recommended to activate the battery and prolong its lifespan.
Connecting Air Pump Hose
To use the air compressor, connect the air pump hose to the designated port on the device. Ensure it is securely fastened.
Connecting Smart Jumper Cables
The smart jumper cables connect to the jump starter via a dedicated port. Ensure a tight connection before attempting to jump start a vehicle.
Bruksanvisning
Hoppstart av kjøretøyet ditt
- Insert the smart jumper cable into the jump starter.
- Koble til den røde clamp to the positive (+) terminal of your car battery and the black clamp til den negative (-) terminalen.
- Start bilmotoren.
- Fjern umiddelbart clamps from the car battery after the engine starts.
Bilde: Steg-for-steg-guide for å starte et kjøretøy med starthjelp.
Bruke luftkompressoren
The integrated air compressor provides up to 150 PSI of airflow. It features 4 preset modes for different items (cars, motorcycles, bikes, balls) and automatically stops when the preset pressure is reached.
- Assemble the air pump hose and attach the appropriate gas nozzle.
- Connect the hose to the tire valve or item to be inflated.
- Use the 'M' button to select the desired inflation mode (car, motorcycle, bike, ball). Adjust the target pressure using the '+' and '-' buttons.
- Press the 'OK' button to start inflation. The device will stop automatically when the target pressure is reached.
Image: The ACEZUK M01 connected to a car tire for inflation.
Bruke LED-lyset
The device includes a high-lumen LED flashlight with multiple modes for various situations.
- Press the light button once for a steady bright light.
- Press again for strobe mode.
- Press a third time for SOS signal mode.
- Trykk en fjerde gang for å slå av lyset.
Image: The ACEZUK M01 demonstrating its 400 lumen LED light with various modes.
Brukes som en Power Bank
The ACEZUK M01 features two USB outputs (5V/3.1A) and one Type-C input/output (5V/3A) to charge mobile devices.
- Connect your mobile device to one of the USB output ports or the Type-C port using an appropriate charging cable.
- The device will begin charging your connected device.
Image: The ACEZUK M01 functioning as a power bank, charging a phone and a tablet.
Understanding the 3.4" LCD Display
The large 3.4-inch digital screen displays operational status, battery level, and potential error codes in real-time, providing clear information at a glance.
Bilde: Detaljert view of the ACEZUK M01's large digital display.
Vedlikehold
- Recharge the car jump pack every 2-3 months to activate the battery and prolong its lifespan.
- If the air pump gets seriously hot during continuous use, cool it down for a few minutes before continuing to inflate.
Feilsøking
If the device does not function as expected, check the following:
- Enhetsstrøm: Ensure the jump starter has sufficient charge (above 25% for jump-starting).
- Kabelforbindelse: Verify that jumper cables are securely connected to both the jump starter and the vehicle battery terminals with correct polarity.
- Feilkoder: Refer to the 3.4" LCD display for any error codes and consult the detailed user manual for specific interpretations and solutions.
- Air Compressor Overheating: If the air compressor stops, it may be due to overheating. Allow it to cool down before resuming operation.
Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Merke | ACEZUK |
| Modell | M01 |
| Battericellesammensetning | Litium polymer |
| Voltage | 12 volt |
| Produktdimensjoner | 1.53" D x 3.64" B x 7.12" H |
| Type kjøretøy | ATV, Cars, Trucks, Motorcycles, Lawnmowers, SUVs, Snowmobiles, Boats |
| Batterikapasitet | 26800 millioneramp Timer (99.16 Wh) |
| Topp utgangsstrøm | 8000 Amps |
| USB1+USB2 Output | 5V=3.1A |
| Type-C inngang/utgang | 5V=3A |
| Luftkompressortrykk | 150 PSI |
| LED lys | 400 Lumen (Bright/Strobe/SOS) |
Image: Detailed diagram of the ACEZUK M01's components and controls.
Garanti og støtte
The ACEZUK M01 Portable Car Jump Starter with Air Compressor comes with a 2-YEAR FREE Warranty. Additionally, customers receive Lifetime Technical Support and 7/24 Customer Service for any inquiries or assistance needed.
Produktvideo
Video: En offisiell overview of the ACEZUK M03 Jump Starter, demonstrating its features and usage.