Livarno Home Digital Water Meter Instruction Manual

Introduksjon

This manual provides comprehensive instructions for the Livarno Home Digital Water Meter, Model 99584. This device is designed to help you monitor your water consumption and temperature during showering, promoting water and energy savings.

Produkt overview

The Livarno Home Digital Water Meter offers the following key features:

• Real-time display of water consumption and temperature.
• Clear digital display with color-coded consumption indicators.
• Three-color illumination based on water usage: Green (up to approx. 40L), Orange (approx. 40-60L), Red (over 60L).
• Reset function for water consumption tracking.
• Displays real-time flow rate in liters/minute and total water consumption since the last reset.
• Easy installation with standard G 1/2" connection.
• Self-powered by water flow, no batteries required.

Oppsett og installasjon

Follow these steps for proper installation of your digital water meter:

1. Preparat: Ensure your shower system has a standard G 1/2" connection. No additional mounting hardware is typically required.
2. Installasjon: Screw the Livarno Home Digital Water Meter directly onto your shower tap or shower hose. Ensure a tight fit to prevent leaks.
3. Vanntrykk: The device requires a minimum water pressure of 1.5 bar to function correctly.
4. Innledende operasjon: Once installed, turn on the water. The device will automatically power on and begin displaying water temperature and consumption.

Bruksanvisning

Vis informasjon

Det digitale displayet gir følgende informasjon:

• Vanntemperatur: Shown in degrees Celsius (°C).
• Strømningshastighet: Displays real-time water flow in liters per minute (L/min).
• Total Consumption: Shows the cumulative water consumption in liters (L) since the last reset.

Color-Coded Consumption Indicator

The display backlight changes color to indicate water consumption levels:

• Grønn: Water consumption up to approximately 40 liters.
• Oransje: Water consumption between approximately 40 and 60 liters.
• Rød: Water consumption exceeding approximately 60 liters.

Reset-funksjon

To reset the total water consumption counter, locate the reset button on the device (refer to product images for exact location). Press and hold the button until the consumption display resets to zero.

Vedlikehold

To ensure optimal performance and longevity of your Livarno Home Digital Water Meter:

• Rengjøring: Rengjør enheten regelmessig med en myk, damp cloth. Avoid abrasive cleaners or solvents that could damage the surface or display.
• Undersøkelse: Periodically check the connections for any signs of leaks. Tighten if necessary.
• Lagring: If storing the device for an extended period, ensure it is clean and dry.

Feilsøking

If you encounter any issues with your digital water meter, please refer to the following common solutions:

• Ingen skjerm/enhet slår seg ikke på:
  • Ensure water flow is active. The device is hydro-powered and requires water flow to operate.
  • Check if the minimum water pressure of 1.5 bar is met.
  • Verify that the device is securely installed and water is flowing through it.
• Unøyaktige avlesninger:
  • Ensure the device is installed correctly and there are no leaks around the connections.
  • Hvis problemene vedvarer, kontakt kundestøtte.
• Lekkasjer ved tilkoblingspunkter:
  • Gently tighten the connection. Do not overtighten, as this may cause damage.
  • Ensure the rubber gaskets or seals are properly seated within the connection.

Spesifikasjoner

Garanti og støtte

For warranty information or technical support, please refer to the product packaging or contact Livarno customer service directly. Keep your purchase receipt as proof of purchase. You may also visit the official Livarno website for additional resources and contact details.