Sunco Lighting 4ft LED Shop Light Instruction Manual

1. Viktig sikkerhetsinformasjon

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringen eller sikringsbryteren før installasjon eller service.
• ADVARSEL: Risk of fire. Keep combustible materials away from the lamp.
• This fixture is intended for indoor use only. Do not use in wet locations or where directly exposed to water.
• Sørg for at forsyningsvoltage is compatible with the fixture's requirements (120V-277V).
• All wiring connections must be made in accordance with local and national electrical codes. If you are unsure about wiring, consult a qualified electrician.
• Ikke forsøk å modifisere eller demontere armaturen. Det er ingen deler inni som kan repareres av brukeren.

2. Hva er i esken

Kontroller at alle komponenter er til stede før installasjonen starter:

• LED Shop Light Fixture(s)
• Monteringsutstyr (skruer, ankere)
• Linking Cables (1.5" and 8" for daisy-chaining)
• Wire Mutters

3. Spesifikasjoner

The fixture features a durable build with an impact-resistant prismatic lens for wide and consistent light dispersion.

This image illustrates key features including impact resistance, the prismatic lens design, non-dimmable functionality, and the wide voltage compatibility of 120-277V.

4. Oppsett og installasjon

Follow these steps for proper installation. Ensure power is disconnected before starting.

4.1. Forbered deg på installasjon

1. Slå av strømmen: Locate the circuit breaker controlling the installation area and turn off the power.
2. Remove Diffuser: Gently remove the prismatic diffuser from the lamp base to access the internal components.
3. Velg fargetemperatur (CCT): Before mounting, locate the CCT switch inside the fixture. Select your desired color temperature (4000K, 5000K, or 6000K). This setting cannot be changed easily after installation.

This image shows the internal CCT switch, allowing selection between 4000K, 5000K, and 6000K before installation.

4.2. Montering av armaturet

The fixture is designed for flush mounting to a ceiling or surface. It includes keyhole slots for easy installation.

1. Merk monteringspunkter: Hold the fixture in the desired mounting location and mark the positions for the mounting screws. Ensure these align with a junction box or suitable support structure.
2. Installer monteringsmaskinvare: Drill pilot holes if necessary and install the provided mounting screws, leaving a small gap for the fixture to slide onto.
3. Forbered ledninger: If connecting to a junction box, knock out the appropriate punch hole on the fixture's housing.

This diagram illustrates the three main steps for installation: securing the housing, connecting electrical wires, and attaching the light fixture.

4.3. Elektrisk forbindelse

1. Koble til ledninger: Using the provided wire nuts, connect the fixture's wires to the supply wires: Live (black) to Live, Neutral (white) to Neutral, and Ground (yellow/green) to Ground. Ensure all connections are secure.
2. Tuck-ledninger: Carefully tuck all wires and wire nuts into the junction box or fixture housing.

4.4. Linking Multiple Fixtures (Daisy Chain)

This fixture supports daisy-chaining to extend lighting coverage. Use the provided linking cables.

1. Connect Linking Cable: Insert one end of a linking cable into the designated port on the first fixture and the other end into the port on the next fixture.
2. Sikre tilkoblinger: Ensure linking cables are securely connected and properly routed.

This image demonstrates how to daisy-chain multiple fixtures using the linking cables and highlights the knockout punch hole for electrical connections.

4.5. Siste trinn

1. Reattach Diffuser: Align one end of the diffuser with the aluminum base and push it into place until it snaps securely.
2. Gjenopprett kraften: Turn the circuit breaker back on to restore power to the fixture.

5. Bruksanvisning

The Sunco Lighting LED Shop Light is designed for straightforward operation once installed.

5.1. Valg av fargetemperatur (CCT)

This fixture features a selectable color temperature (CCT) switch, allowing you to choose between 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White) to suit your preference or application. The CCT switch is located inside the fixture and must be set during installation before the diffuser is reattached.

• 4000K: Provides a neutral white light, suitable for offices or general workspaces.
• 5000K: Offers a bright, crisp daylight-like illumination, ideal for tasks requiring high visibility.
• 6000K: Delivers a very bright, cool white light, often preferred for industrial settings or areas needing maximum brightness.

This image displays the internal components and wiring, emphasizing the high efficiency of the LED fixture operating within a 120-277V range.

5.2. Slå på/av

The fixture is non-dimmable and operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.

6. Vedlikehold

The Sunco Lighting LED Shop Light requires minimal maintenance. Always ensure power is disconnected before performing any maintenance.

• Rengjøring: Wipe the exterior of the fixture with a soft, dry, or slightly damp klut. Ikke bruk sterke kjemikalier eller slipende rengjøringsmidler, da disse kan skade overflaten eller linsen.
• Undersøkelse: Periodically inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician.
• Ingen pærebytte: This fixture uses integrated LEDs, meaning there are no bulbs to replace. The LEDs are designed for a long lifespan of 50,000 hours.

7. Feilsøking

If you experience issues with your LED Shop Light, refer to the following common troubleshooting steps:

• Lyset slår seg ikke på:
  • Sjekk strømbryteren for å sikre at strømmen er på.
  • Kontroller at alle ledningstilkoblinger er sikre og korrekte.
  • Sørg for at veggbryteren er i PÅ-posisjon.
• Lys flimrer:
  • Confirm the fixture is not connected to a dimmer switch, as it is non-dimmable.
  • Se etter løse ledningsforbindelser.
  • Sørg for at forsyningsvoltage er stabil og innenfor det angitte området.
• Incorrect color temperature:
  • The CCT switch must be set before installation. If the diffuser is already installed, carefully remove it to access and adjust the switch.

If these steps do not resolve the issue, contact Sunco Lighting customer support for assistance.

8. Garanti og støtte

Sunco Lighting står inne for kvaliteten på produktene sine.

• Garanti: This product is backed by a 3-Year Warranty. Please refer to the official Sunco Lighting webnettstedet eller kjøpsdokumentasjonen din for fullstendige garantidetaljer og vilkår.
• Kundestøtte: For technical assistance, troubleshooting, or warranty claims, please contact Sunco Lighting customer support.