1. Overview
The Visual Land Soundwave A1 Active Noise Cancelling Earbuds provide a high-quality audio experience with advanced features designed for comfort and convenience. These earbuds feature 6-microphone Active Noise Cancellation, up to 40 hours of total playtime, fast charging capabilities, and an IPX5 water-resistant rating, making them suitable for various activities and environments.
Nøkkelfunksjoner inkluderer:
- Aktiv støyreduksjon (ANC): 6-mic system for superior ambient noise reduction.
- Lang spilletid: Opptil 40 timers total spilletid med ladeetuiet.
- Rask lading: 15 minutes of charging provides up to 5 hours of playtime.
- IPX5 Vannbestandig: Protection against sweat and light splashes.
- Berøringskontroller: Intuitive controls for audio playback and call management.
- Komfortabel passform: Includes 3 ear tip sizes for a secure and comfortable fit.
2. Hva er i esken
Vennligst sjekk innholdet i pakken for å sikre at alle varene er til stede:
- Visual Land Soundwave A1 Earbuds (Left and Right)
- Ladeetui
- Ekstra ørepropper (forskjellige størrelser)
- USB-C ladekabel
- Instruksjoner (denne håndboken)
3. Produktkomponenter
Familiarize yourself with the different parts of your Visual Land Soundwave A1 Earbuds and charging case.

Image 1: Visual Land Soundwave A1 Earbuds inside their open charging case, showing the earbuds and three illuminated LED battery indicators.

Image 2: A pair of Visual Land Soundwave A1 Earbuds shown from a side angle, highlighting their ergonomic design and ear tips.
4. Oppsett
4.1 Lade øreproppene og etuiet
Before first use, fully charge the earbuds and charging case. The case provides additional power for extended listening.
- Plasser øreproppene i ladeetuiet. Sørg for at de sitter riktig i de respektive sporene.
- Koble USB-C-ladekabelen til ladeporten på etuiet og den andre enden til en USB-strømkilde (f.eks. en veggadapter, datamaskinens USB-port).
- The LED indicators on the charging case will illuminate to show charging status. A full charge typically takes approximately 1.5-2 hours for the case and earbuds.
- The earbuds support fast charging: 15 minutes of charging can provide up to 5 hours of playtime. The total playtime with a fully charged case is up to 40 hours.
4.2 Bluetooth-paring
Følg disse trinnene for å koble øreproppene til enheten din:
- Sørg for at øreproppene er ladet.
- Åpne ladeetuiet. Øreproppene vil automatisk gå inn i paringsmodus, og indikatorlampene vil blinke.
- Gå til Bluetooth-innstillingene på enheten din (smarttelefon, nettbrett, datamaskin).
- Søk etter available devices and select "Visual Land Soundwave A1" from the list.
- Når de er tilkoblet, vil indikatorlampene på øreproppene slutte å blinke, og du vil høre en bekreftelsestone.
- Øreproppene kobler seg automatisk til den sist parede enheten når de tas ut av etuiet, hvis Bluetooth er aktivert på enheten.
5. Bruk av øreproppene
5.1 Berøringskontroller
The Visual Land Soundwave A1 Earbuds feature intuitive touch controls on each earbud. The specific functions may vary slightly, but common controls are:
- Enkelt trykk: Spill av/pause musikk, svar på/avslutt samtale.
- Dobbelttrykk (venstre øreplugg): Forrige spor.
- Dobbelttrykk (høyre øreplugg): Neste spor.
- Trippeltrykk (enten øreplugger): Aktiver stemmeassistent.
- Langt trykk (venstre ørepropp): Reduser volumet.
- Langt trykk (høyre ørepropp): Øk volumet.
- Long Press (Either Earbud for 2 seconds): Bytt mellom ANC-, Transparent- og Normal-modus.
- Long Press (Either Earbud during incoming call): Avvis samtalen.
Note: Refer to the quick start guide included in your package for the most precise touch control mapping.
5.2 Aktiv støydemping (ANC) og transparensmodus
The Soundwave A1 earbuds offer three listening modes:
- Aktiv støyreduksjon (ANC): Reduces ambient noise for an immersive listening experience. Ideal for travel or noisy environments.
- Gjennomsiktighetsmodus: Allows you to hear your surroundings while still enjoying your audio. Useful for awareness in urban areas or when interacting with others.
- Normal modus: Standard listening mode without active noise cancellation or transparency features.
To switch between these modes, perform a long press on either earbud for approximately 2 seconds until you hear an audible prompt indicating the mode change.
Video 1: An official product video demonstrating the Active Noise Cancellation feature and immersive sound experience of the Visual Land Soundwave A1 Earbuds.
6. Vedlikehold
6.1 Rengjøring
Regelmessig rengjøring bidrar til å opprettholde optimal ytelse og hygiene:
- Bruk en myk, tørr og lofri klut til å tørke av øreproppene og ladeetuiet.
- For ear tips, gently remove them from the earbuds and clean with a mild soap solution if necessary, then rinse thoroughly and dry completely before reattaching.
- Unngå bruk av slipende materialer, alkohol eller kjemiske rengjøringsmidler.
- Sørg for at ladekontaktene på både øreproppene og etuiet er rene og fri for rusk.
6.2 Vannmotstand
The earbuds are IPX5 water-resistant, meaning they can withstand light splashes and sweat. They are not designed for submersion in water. Do not use them while swimming or showering. Ensure earbuds are dry before placing them back into the charging case to prevent damage.
6.3 Oppbevaring
Når øreproppene ikke er i bruk, bør de oppbevares i ladeetuiet for å beskytte dem og holde dem ladet. Oppbevares kjølig og tørt, unna ekstreme temperaturer.
7. Feilsøking
Hvis du støter på problemer med øreproppene, kan du prøve følgende løsninger:
- Øreproppene kobles ikke sammen:
- Sørg for at øreproppene er ladet.
- Slå av Bluetooth på enheten din og slå den på igjen.
- Forget "Visual Land Soundwave A1" from your device's Bluetooth list and try pairing again.
- Sett øreproppene tilbake i etuiet, lukk lokket, vent noen sekunder, og åpne dem deretter for å gå inn i paringsmodus igjen.
- Ingen lyd fra ett eller begge øreproppene:
- Check the volume level on your device and on the earbuds.
- Sørg for at øreproppene er riktig koblet til enheten din.
- Rengjør eventuelt rusk fra øreproppenes høyttalere og ørepropper.
- Try resetting the earbuds (refer to the full manual or manufacturer's webnettsted for spesifikke tilbakestillingsinstruksjoner om nødvendig).
- Ladeproblemer:
- Sørg for at USB-C-kabelen er ordentlig koblet til både kabinettet og strømkilden.
- Prøv en annen USB-C-kabel og strømadapter.
- Rengjør ladekontaktene på øreproppene og inni etuiet.
- Dårlig lydkvalitet eller brutt forbindelse:
- Flytt deg nærmere den parede enheten for å redusere forstyrrelser.
- Sørg for at det ikke er noen fysiske hindringer mellom øreproppene og enheten din.
- Start enheten på nytt.
If problems persist, please contact Visual Land customer support.
8. Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modellnavn | SOUNDWAVE A1 V2 |
| Bluetooth-versjon | 5.3 |
| Støykontroll | Aktiv støyreduksjon (ANC) |
| Mikrofoner | 6-mic system |
| Total spilletid | Opptil 40 timer (med ladeetui) |
| Rask lading | 15 minutters lading gir 5 timers spilletid |
| Vannmotstand | IPX5 |
| Kontrollmetode | Røre |
| Tilkobling | Trådløs (Bluetooth) |
| Øreplassering | In Ear |
| Materiale | Plast |
| Varevekt | 2 unser |
| Inkluderte komponenter | Earbuds, Charging Case, Additional Ear Tips, USB-C Charging Cable, Instructions |
9. Sikkerhetsinformasjon
Please read and follow these safety guidelines to ensure safe operation and prolong the life of your earbuds:
- Hørselvern: Unngå å lytte med høyt volum i lengre perioder for å unngå hørselsskader.
- Miljøbevissthet: Do not use earbuds in situations where inability to hear surroundings could be dangerous (e.g., driving, cycling, walking in traffic). Use Transparency Mode when awareness is needed.
- Vanneksponering: The earbuds are IPX5 water-resistant, not waterproof. Do not submerge them in water or expose them to heavy rain. Ensure they are dry before charging.
- Kvelningsfare: Keep earbuds and small parts away from children and pets.
- Batterisikkerhet: Do not attempt to replace the battery yourself. Do not expose the product to extreme temperatures, direct sunlight, or fire. Dispose of batteries according to local regulations.
- Rengjøring: Only clean with a dry, soft cloth. Avoid harsh chemicals.
10. Garanti og støtte
Visual Land products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Visual Land webnettstedet.
For technical support, troubleshooting assistance, or general inquiries, please contact Visual Land customer service through their official webnettstedet eller kontaktinformasjonen som er oppgitt på produktemballasjen.
Produsent: Visuelt land