Introduksjon
Thank you for choosing the Baseus Bowie E20 True Wireless Earbuds. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your earbuds to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
The Baseus Bowie E20 earbuds feature advanced Bluetooth 5.3 connectivity, Environmental Noise Cancellation (ENC) for clear calls, powerful 12mm drivers for immersive sound, IPX5 water resistance, and up to 33 hours of total playtime with the charging case.
Image: A detailed diagram of the 12mm PU diaphragm driver, highlighting its components responsible for powerful bass and clear audio.
Pakkeinnhold
Sørg for at alle varene er til stede i pakken:
- Baseus Bowie E20 ekte trådløse ørepropper (venstre og høyre)
- Ladeetui
- USB-C ladekabel
- Flere størrelser på ørepropper (S, M, L)
- Brukerhåndbok
Image: Contents of the Baseus Bowie E20 package, including the charging case with earbuds, USB-C charging cable, and various eartip sizes.
Produkt overview
Familiarize yourself with the components of your Baseus Bowie E20 earbuds and charging case.
Image: The Baseus Bowie E20 earbuds placed inside their open charging case, showing the charging contacts and internal layout.
- ørepropper: Left and Right earbuds with touch control areas and microphones.
- Ladeetui: Houses and charges the earbuds, with a USB-C charging port and LED indicator.
- LED-indikator: Viser ladestatus og batterinivå.
- Mikrofoner: Dual-mic setup for Environmental Noise Cancellation (ENC).
Oppsett
1. Førstegangsavgift
Lad øreproppene og ladeetuiet helt opp før første gangs bruk.
- Plasser begge øreproppene i ladeetuiet.
- Connect the USB-C charging cable to the charging port on the case and a power source (e.g., USB wall adapter, computer USB port).
- The LED indicator on the case will show charging status. A full charge typically takes approximately 1.5 hours for the case and 1 hour for the earbuds.
Image: The Baseus Bowie E20 charging case connected to a USB-C cable, illustrating the charging process.
2. Pairing with a Device (Bluetooth 5.3)
The Baseus Bowie E20 uses Bluetooth 5.3 for a stable and efficient connection.
- Sørg for at øreproppene er ladet og plassert i ladeetuiet.
- Open the charging case lid. The earbuds will automatically enter pairing mode, and the LED indicator will flash.
- Aktiver Bluetooth på enheten din (smarttelefon, nettbrett, datamaskin).
- Søk etter "Baseus Bowie E20" in the list of available Bluetooth devices and select it to connect.
- Once connected, the LED indicator on the case will turn off or show a steady light, and you will hear a confirmation tone.
Image: A visual representation of the Bluetooth 5.3 chip and connection process for the Baseus Bowie E20 earbuds, highlighting faster and more stable connectivity.
Note: Øreproppene kobler seg automatisk til den sist parede enheten når de tas ut av etuiet, hvis Bluetooth er aktivert på enheten.
Bruksanvisning
Trykk på kontroller
The Baseus Bowie E20 earbuds feature intuitive touch controls on each earbud. The capacitive touch technology provides responsive and durable control.
| Handling | Control (L or R Earbud) |
|---|---|
| Spill av/pause | Dobbelttrykk |
| Neste spor | Trippeltrykk Høyre øreplugg |
| Forrige spor | Trippeltrykk på venstre øreplugg |
| Besvar/avslutt samtale | Dobbelttrykk |
| Avvis anrop | Trykk og hold i 2 sekunder |
| Aktiver stemmeassistent | Trykk og hold i 3 sekunder |
| Cycle Noise Cancellation Modes (ANC/Transparency/Normal) | Trykk og hold i 2 sekunder (L eller R) |
Image: Diagram illustrating the touch control functions on the Baseus Bowie E20 earbuds, including play/pause, voice assistant, noise cancellation, and spatial audio.
Miljøstøydemping (ENC)
The dual-mic ENC technology helps eliminate background noise for crystal-clear calls.
Image: Close-up internal view of the Baseus Bowie E20 earbud highlighting the dual-mic setup for Environmental Noise Cancellation (ENC).
To activate or cycle through noise cancellation modes, use the touch control as described in the table above.
Vedlikehold
Rengjøring
- Rengjør øreproppene og ladeetuiet regelmessig med en myk, tørr og lofri klut.
- For gjenstridig smuss, litt dampno kluten med vann eller et mildt, ikke-slipende rengjøringsmiddel.
- Ikke bruk sterke kjemikalier eller skurende materialer.
- Sørg for at ladekontaktene på både øreproppene og etuiet er rene og tørre for å unngå ladeproblemer.
Lagring
- Når de ikke er i bruk, oppbevar alltid øreproppene i ladeetuiet for å beskytte dem og holde dem ladet.
- Oppbevares kjølig og tørt, unna ekstreme temperaturer og direkte sollys.
Vannmotstand (IPX5)
The Baseus Bowie E20 earbuds are IPX5 water-resistant, meaning they can withstand sweat and light rain. They are not designed for submersion in water.
Image: The Baseus Bowie E20 earbuds and charging case depicted with water splashes, illustrating their IPX5 waterproof rating for resilience against sweat and raindrops.
- Do not expose to running water or submerge in liquid.
- Tørk øreproppene grundig før du legger dem tilbake i ladeetuiet hvis de blir våte.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Øreproppene kobles ikke til enheten. | Bluetooth is off; earbuds not in pairing mode; device list cluttered. | Ensure Bluetooth is on. Open case lid to enter pairing mode. Forget "Baseus Bowie E20" from device's Bluetooth list and re-pair. |
| Bare én ørepropp spiller lyd. | Earbuds not properly connected to each other or device. | Place both earbuds back in the case, close the lid, wait a few seconds, then open again. Re-pair if necessary. |
| Øreproppene lader ikke. | Dirty charging contacts; faulty cable/power source; case battery low. | Clean charging contacts. Try a different USB-C cable and power source. Ensure charging case has sufficient battery. |
| Lavt volum eller dårlig lydkvalitet. | Incorrect eartip size; earbud placement; dirty speaker mesh; device volume too low. | Try different eartip sizes for a better seal. Adjust earbuds for proper fit. Clean speaker mesh. Increase device volume. |
| Berøringskontrollene reagerer ikke. | Earbuds not properly seated; temporary software glitch. | Ensure earbuds are firmly in your ears. Place earbuds back in case, close, then reopen to reset. |
Fabrikkinnstilling
Hvis du opplever vedvarende problemer, kan en tilbakestilling til fabrikkinnstillinger løse dem:
- Forget "Baseus Bowie E20" from your device's Bluetooth list.
- Place both earbuds into the charging case and ensure they are charging.
- With the lid open, press and hold the function button on the charging case (if available, otherwise refer to specific model instructions for reset) for approximately 10-15 seconds until the indicator light flashes rapidly, then turns off.
- Close the case, then open it again to re-enter pairing mode and re-pair with your device.
Note: The provided product information does not specify a physical reset button. The general reset procedure for many TWS earbuds involves placing them in the case and holding a button or tapping the earbuds. If the above doesn't work, consult the official Baseus support for the exact reset procedure for Bowie E20.
Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modellnummer | A00069700223-00 |
| Bluetooth-versjon | 5.3 |
| Driverstørrelse | 12 mm |
| Støyreduksjon | ENC (miljøstøydemping) |
| Vanntett vurdering | IPX5 |
| Total spilletid | Opptil 33 timer (med ladeetui) |
| Spilletid for øreplugger | Approximately 6 hours (single charge) |
| Ladeport | USB-C |
| Batteri (etui) | 500 mAh / 1.85Wh |
| Input (Case) | 5V / 220mA |
| Produktdimensjoner | 5.4 x 5.2 x 3.1 cm |
| Produktvekt | 47 g |
| Impedans | 32 Ohm |
| Opprinnelsesland | Kina |
Bilde: Bak view of the Baseus Bowie E20 charging case showing printed specifications like battery capacity and input/output voltage.
Garanti og støtte
Baseus products typically come with a limited warranty. Please refer to the warranty card included in your package or visit the official Baseus webnettstedet for detaljerte garantivilkår og -betingelser som er spesifikke for din region.
For technical support, product inquiries, or warranty claims, please contact Baseus customer service through their official webnettstedet eller forhandleren der du kjøpte produktet.
Baseus Official Webnettsted: www.baseus.com
Sikkerhetsinformasjon
- Ikke demonter, reparer eller modifiser produktet.
- Holdes unna ekstreme temperaturer, fuktighet og etsende stoffer.
- Unngå å miste eller utsette produktet for sterke støt.
- Ikke bruk produktet i miljøer som krever din fulle oppmerksomhet (f.eks. kjøring, sykling) for å unngå ulykker.
- Langvarig eksponering for høye volumnivåer kan forårsake hørselsskader.
- Kast produktet på en ansvarlig måte i henhold til lokale forskrifter for elektronisk avfall.