Simyke BME28-RX Video Baby Monitor Add-on Display User Manual

Introduksjon

Thank you for choosing the Simyke BME28-RX Video Baby Monitor Add-on Display. This unit is designed to expand your existing Simyke BME28 or BMS28 series baby monitor system, allowing you to view your baby from multiple locations or replace a lost/damaged parent unit. It features a high-quality IPS screen for clear visuals and a long-lasting battery for extended use. Please read this manual carefully before use to ensure proper operation and safety.

Sikkerhetsinformasjon

Keep the monitor unit and power adapter out of reach of children.
Do not place the monitor unit near water or heat sources.
Use only the provided power adapter. Using unauthorized adapters may damage the unit and void the warranty.
Avoid dropping or subjecting the unit to severe impact.
Ikke forsøk å demontere eller reparere enheten selv. Kontakt kundestøtte for å få hjelp.
Sørg for tilstrekkelig ventilasjon rundt enheten under drift.

Hva er i esken

1x Simyke BME28-RX Baby Monitor (Display Only)
1x strømadapter
1x brukerveiledning

Produkt overview

Front view of the Simyke BME28-RX baby monitor display unit, showing the screen and control buttons.

Figur 1: Front view of the Simyke BME28-RX display unit, featuring the IPS screen and navigation buttons.

Front view of the Simyke BME28-RX baby monitor display unit with the screen active, showing a baby's image and status icons.

Figur 2: The display unit with its screen active, showing a live feed and various status indicators like signal strength and temperature.

Tilbake view of the Simyke BME28-RX baby monitor display unit, showing the speaker grille and kickstand.

Figur 3: Bak view of the display unit, highlighting the integrated speaker and the foldable kickstand for tabletop placement.

Display Unit Components

IPS-skjerm: High-resolution display for clear video feed.
Navigasjonsknapper: Opp, ned, venstre, høyre, OK for menynavigasjon.
Strømknapp: Trykk og hold for å slå på/av.
Mikrofonknapp: Press to activate two-way audio.
Høyttaler: For two-way audio and alerts.
Ladeport: For tilkobling av strømadapter.
Støtte: For plassering på bord.

Oppsett

1. Charging the Display Unit

Before first use, fully charge the display unit. Connect the provided power adapter to the charging port on the side of the display unit and plug it into a power outlet. The charging indicator light will illuminate. A full charge typically takes approximately 3-4 hours.

2. Pairing with a Camera Unit

This display unit is an add-on and must be paired with a compatible Simyke BME28 or BMS28 series camera unit. If your camera is already paired with another display, you can add this new display. Refer to your original camera unit's manual for specific pairing instructions. Generally, the steps involve:

Turn on both the display unit and the camera unit.
Access the 'Camera Pairing' or 'Add Camera' option in the display unit's menu.
Press the pairing button on the camera unit (location varies by model, usually on the back or bottom).
The display unit will search for and connect to the camera. Once connected, the camera's video feed will appear on the screen.

Bruksanvisning

Slå på/av

To turn on: Press and hold the Power button (⑂) until the screen illuminates.
To turn off: Press and hold the Power button (⑂) until the screen goes blank.

Grunnleggende funksjoner

Volumkontroll: Use the Up/Down navigation buttons to adjust the speaker volume.
Lysstyrkekontroll: Navigate to the 'Settings' menu and select 'Brightness' to adjust screen illumination.
Menynavigering: Use the Up/Down/Left/Right navigation buttons to move through menu options. Press the OK button to confirm a selection.

Nøkkelfunksjoner

Image showing a person holding the monitor and a speech bubble indicating two-way audio with a baby.

Figur 4: Two-Way Audio feature, allowing communication with your baby.

Image comparing VOX mode (screen off when quiet) and temperature monitoring (screen on with crying baby).

Figur 5: VOX Mode and Temperature Monitoring capabilities.

Image showing the monitor's ability to display both day (color) and night (infrared black and white) views.

Figur 6: Day and Night monitoring, ensuring visibility in all lighting conditions.

Toveis lyd: Press and hold the Microphone button (🎤) to speak through the camera unit to your baby. Release the button to hear your baby.
VOX Mode (Voice Operated Exchange): This mode conserves battery by turning off the screen when no sound is detected from the baby's room. The screen will automatically light up when sound is detected. Enable/disable VOX mode in the 'Settings' menu.
Temperaturovervåking: The display unit shows the real-time temperature of the baby's room, as detected by the camera unit. Set temperature alerts in the 'Settings' menu.
Multikamera View: If you have multiple cameras paired, you can switch between camera views or enable a scan mode to cycle through them automatically. This feature supports up to 4 cameras.
Infrarød nattsyn: The camera unit automatically switches to infrared night vision in low-light conditions, providing a clear black-and-white image on the display unit.

Vedlikehold

Rengjøring: Use a soft, dry cloth to clean the display unit. Do not use abrasive cleaners or solvents.
Lagring: If storing the unit for an extended period, ensure it is fully charged and then store it in a cool, dry place. Recharge the battery every few months to maintain its health.
Batteripleie: For å forlenge batterilevetiden, unngå å utlade batteriet helt ofte.

Feilsøking

Problem	Mulig årsak	Løsning
No power/Unit won't turn on	Battery is low or depleted. Power adapter not connected properly.	Connect the power adapter and charge the unit for at least 30 minutes. Ensure the adapter is securely plugged into both the unit and the outlet.
Ingen video/lyd fra kameraet	Camera is off or out of range. Unit is not paired with the camera.	Ensure the camera unit is powered on and within range. Re-pair the display unit with the camera unit following the 'Pairing' instructions.
Poor video/audio quality	Interference from other devices. Camera too far from display.	Move the display unit closer to the camera. Avoid placing the unit near other electronic devices (e.g., Wi-Fi routers, microwaves) that may cause interference.
Screen freezes or unit is unresponsive	Midlertidig programvarefeil.	Perform a soft reset by pressing and holding the Power button for 10-15 seconds until the unit restarts. If the issue persists, contact customer support.
Batteriet tømmes raskt	High screen brightness. VOX mode disabled. Aging battery.	Reduce screen brightness. Enable VOX mode to conserve power. If the battery life has significantly degraded over time, it may be reaching the end of its lifespan.

Spesifikasjoner

Trekk	Spesifikasjon
Modellnavn	BME28-RX Display only
Kompatible enheter	Simyke BME28, BMS28 series baby camera
Skjermtype	IPS-skjerm
Videoopptaksoppløsning	240P
Tilkoblingsteknologi	Trådløst (Wi-Fi)
Strømkilde	Corded Electric and Battery Powered
Batterikapasitet	2500mAh litiumpolymer (inkludert)
Batterilevetid	Opptil 14 timer
Antall kanaler	4 (støtter opptil 4 kameraer)
Dimensjoner (L x B x H)	4.72 x 2.6 x 0.9 tommer
Varevekt	7.8 unser
Farge	Hvit
Innendørs/utendørs bruk	Innendørs
Monteringstype	Bordfeste
Spesielle funksjoner	Portable, 2-Way Audio, Cry Detection (VOX Mode)

Garanti og støtte

Simyke products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your original baby monitor system or visit the official Simyke website. If you encounter any issues not covered in this manual, please contact Simyke customer service for assistance.

Produsent: Guangdong Envision Technology Limited

Opprinnelsesland: Kina

Simyke BME28-RX