BioloMix 2000g Electric Grain Grinder Mill Instruction Manual

1. Viktige sikkerhetsinstruksjoner

Please read all instructions carefully before operating the BioloMix 2000g Electric Grain Grinder Mill. Retain this manual for future reference.

• Elektrisk sikkerhet: Sørg for at strømforsyningen samsvarer med voltage specified on the grinder. Do not operate with a damaged cord or plug. Keep the appliance away from water or other liquids.
• Materialeegnethet: This grinder is designed for dry materials only. Do not grind wet, fresh, oily, or sticky substances such as peanuts, walnuts, or meat, as this can damage the blades and motor.
• Lokksikkerhet: The grinder will only operate when the lid is securely fastened. Do not attempt to open the lid or reach into the grinding chamber while the machine is operating.
• Overbelastningsbeskyttelse: The unit features an overload protector. If the motor overheats or is overloaded, the machine will automatically stop. Allow it to cool for 5-10 minutes before pressing the overload protector button to resume operation.
• Barn og kjæledyr: Hold apparatet utilgjengelig for barn og kjæledyr.
• Rengjøring: Always unplug the grinder from the power outlet before cleaning or maintenance.

2. Produktet er overview

Familiarize yourself with the components of your BioloMix Electric Grain Grinder Mill.

Bilde 1: BioloMix 2000g Electric Grain Grinder Mill with labeled components: Lock, Metal Handle, Stainless Steel Lid, Chamber, On/Timer, Fasten Switch, Overload Protection, Motor.

Inkluderte komponenter:

• Electric Grain Grinder (Main Unit) x1
• Spare Blade x5
• Spare Carbon Brush x2
• Rengjøringsbørste x1
• Blades Opener x1
• Brukerhåndbok x1
• Mutter x1
• Upper Blade x1
• Mains Cover x1
• Skruer x4
• Carbon Covers Blade Opener x4

Bilde 2: BioloMix 2000g Electric Grain Grinder Mill with dimensions and included accessories.

3. Oppsett og første gangs bruk

1. Pakke ut: Fjern forsiktig alle komponenter fra emballasjen.
2. Undersøke: Check the grinder for any signs of damage. Do not use if damaged.
3. Rengjøre: Before first use, clean the grinding chamber and blades with the provided cleaning brush. Wipe the exterior with a damp klut. Sørg for at alle delene er helt tørre før bruk.
4. Plassering: Plasser kvernen på en stabil, flat og tørr overflate. Sørg for tilstrekkelig ventilasjon rundt enheten.
5. Strømtilkobling: Koble strømledningen til en passende stikkontakt.

4. Bruksanvisning

Follow these steps for effective grinding:

1. Forbered materiale: Ensure your material is completely dry. Break larger pieces into smaller ones if necessary.
2. Last materiale: Open the lid and carefully pour the dry material into the grinding chamber. Viktig: The material must cover the long blade in the middle, but should not exceed 2/3 of the tank capacity. 1/2 of the tank is the optimal fill level.


Bilde 3: Loading dry material into the grinding chamber.

3. Sikkert lokk: Close the stainless steel lid firmly and engage the lock mechanism. The grinder will not operate if the lid is not properly secured.
4. Still inn timer: Use the 'On/Timer' dial to set the desired grinding time. For most grains, 30 seconds is sufficient for fine powder. Harder materials may require 2-3 minutes. The maximum continuous working time is 5 minutes.
5. Start sliping: Press the start button. The grinder will operate for the set duration.
6. Overvåke prosess: The grinding process generates heat, which is normal.
7. Check Fineness: After the timer completes, wait for the blades to stop completely before opening the lid. Check the fineness of the ground material. If a finer consistency is desired, repeat the grinding process for a shorter duration.

Bilde 4: Grinding performance for various materials and times.


Bilde 5: Examples of grinding results for different spices and grains.

8. Helling: Utilize the 270-degree swing feature to conveniently pour out the ground material.


Bilde 6: The 270-degree swing type design for easy pouring.

5. Vedlikehold og rengjøring

Regular cleaning and maintenance ensure optimal performance and longevity of your grinder.

1. Koble fra: Trekk alltid støpselet til kvernen ut av stikkontakten før rengjøring.
2. Empty Chamber: Remove all ground material from the chamber.
3. Clean Chamber and Blades: Use the provided cleaning brush to remove any residue from the grinding chamber and blades. For stubborn residue, a slightly damp cloth can be used, but ensure the chamber is completely dry before next use. Do not immerse the main unit in water.


Bilde 7: Close-up of the 3-layer stainless steel blades.

4. Utvendig rengjøring: Wipe the exterior of the grinder with a clean, dry cloth.
5. Skifte blad: If blades become dull or damaged, use the blades opener to carefully replace them with the spare blades provided. Refer to the included components list for spare parts.
6. Utskifting av karbonbørste: If the motor performance decreases, the carbon brushes may need replacement. Use the carbon covers blade opener to access and replace the carbon brushes.
7. Lagring: Store the grinder in a dry, cool place when not in use.

6. Feilsøking

Se denne delen for vanlige problemer og løsninger på disse.

Bilde 8: Location of the overload protector button.

7. Spesifikasjoner

Bilde 9: High-speed copper motor details.

8. Garanti og støtte

For warranty information, technical support, or any inquiries regarding your BioloMix 2000g Electric Grain Grinder Mill, please refer to the contact details provided with your purchase documentation or visit the official Biolomix webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis for garantikrav.