Viktig sikkerhetsinformasjon
- Do not exceed the maximum weight recommendation of 3500 pounds. Exceeding this limit may result in injury or product damage.
- Improper assembly can lead to instability or collapse. Follow all instructions carefully.
- Be cautious of potential pinch points during assembly, especially near moving parts and joints.
- Sørg for at alle bolter og skruer er godt strammet før bruk. Kontroller og stram festene med jevne mellomrom.
- Hold små deler unna barn under montering for å unngå kvelningsfare.
Pakkeinnhold
Kontroller at alle komponenter er til stede før monteringen starter. Kontakt kundeservice hvis noen deler mangler eller er skadet.
- Metal Bed Frame Components (labeled A, B, C, D, E, F, G, H, K, M, N, P, Q, R)
- Mattress Gaskets (4 pieces)
- Assembly Tools (Hex key, Wrench)
- Screws and Bolts (labeled S for short, L for long, W for washers)
- Installasjonshåndbok
Figure 1: All components included in the package, laid out for identification.
Oppsettinstruksjoner
Follow these steps for easy and secure assembly of your Superay Metal Platform Bed Frame.
Step 1: Assemble the Side Frames
- Unfold the main side frame sections (A, B, C, D, E, F, G, H, J).
- Attach leg B to section A using short screws (S). Ensure the holes align.
- Attach leg H to section C using short screws (S).
- Repeat for the other side, attaching legs D to sections E and G.
Figure 2: Partially assembled bed frame showing the side sections connected.
Step 2: Connect Center Support Beams
- Connect the center support beams (M) to the side frames using short screws (S).
- Attach the central crossbar (N) to the center support beams (M) using long screws (L) and washers (W). Ensure the 'UP' labels on the crossbar are facing upwards and the connection points are aligned.
Figure 3: Proper alignment of the central crossbar (P bars) for secure assembly.
Step 3: Install Slats and Mattress Stoppers
- Unfold and place the steel slats (R) across the frame. The slats are designed for easy, quick installation.
- Install the four mattress gaskets (stoppers) into the designated slots on the frame. Ensure they are mounted outwards to effectively secure the mattress.
Figure 4: Correct installation of mattress stoppers to prevent mattress sliding.
Monteringsvideoguide
For a visual guide on the assembly process, please refer to the official installation video:
Video 1: Superay Metal Bed Frame Installation Guide (2025 Version). This video provides a step-by-step visual demonstration of the bed frame assembly.
Video 2: How to Use the Mattress Stopper. A short guide demonstrating the correct placement and function of the mattress stoppers.
Bruksanvisning
Once assembled, your Superay Metal Platform Bed Frame is ready for use. No box spring is needed as the steel slats provide ample støtte for madrassen din.
Madrassplassering
- Carefully place your full-size mattress directly onto the assembled steel slats.
- Ensure the mattress is centered and rests securely against the installed mattress stoppers at the head of the bed.
Headboard Attachment
The frame includes three pre-drilled holes for attaching a compatible headboard (not included).
- Align your headboard with the pre-drilled holes on the bed frame.
- Secure the headboard using appropriate bolts and nuts (not included with the bed frame, typically supplied with the headboard).
Figure 5: Headboard mounting holes for compatibility with various headboard styles.
Vedlikehold
- Rengjøring: Tørk av metallrammen med annonseamp klut og mildt vaskemiddel. Unngå skurende rengjøringsmidler.
- Festekontroll: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent noise.
- Gulvbeskyttelse: The silicone anti-slip foot caps protect your floor. Ensure they are in place and undamaged.
Feilsøking
- Knirkende lyder: If the bed frame squeaks, check all connections and tighten any loose bolts. The integrated silent sponges between slats are designed to prevent noise.
- Madrassgliding: Ensure the mattress stoppers are correctly installed and positioned outwards.
- Ustabilitet: Verify that all legs are firmly on the ground and all connections are securely fastened. Check for any bent or damaged components.
Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Størrelse | Full |
| Produktdimensjoner | 74.5 cm L x 53.4 cm B x 14 cm H |
| Oppbevaringshøyde under sengen | 12.4 tommer |
| Vekt kapasitet | Opptil 3500 lbs |
| Materiale | Heavy-duty Steel, Powder Coated Finish |
| Spesielle funksjoner | Rounded Corners, Noise-Free Design (Silent Sponges), Squeak Resistant, Sturdy & Durable, Headboard Compatible (3 pre-drilled holes), Under-bed Storage |
| Montering påkrevd | Ja |
| Inkluderte komponenter | Installation Manual, Mattress Gaskets (4), Slats, Tools |
Figure 6: Detailed dimensions of the Superay 14 Inch Full Metal Platform Bed Frame.
Figure 7: Comprehensive dimension information for different bed frame sizes.
Figure 8: Key design features including rounded corners, anti-slip baffles, and silicone foot mats.
Garanti og støtte
For warranty information, product support, or to purchase replacement parts, please contact Superay customer service through the retailer where the product was purchased or visit the official Superay store online. Please have your purchase receipt and product model number (Full 14 Inch) available when contacting support.
Superay is committed to providing durable, reliable products and comprehensive after-sales support.
