TUXING 4500Psi/300Bar High-Pressure Air Compressor User Manual

1. Sikkerhetsinstruksjoner

Read all safety warnings and instructions carefully before operating this air compressor. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage. Keep this manual for future reference.

• Elektrisk sikkerhet: Ensure the power supply matches the compressor's requirements (110V, 60Hz, 30A). Use a grounded outlet. Do not operate in wet conditions.
• Fare for høyt trykk: This compressor generates extremely high pressure (up to 4500 Psi/300 Bar). Always connect to appropriate high-pressure tanks and hoses. Never point the air outlet at people or animals.
• Ventilasjon: Operate the compressor in a well-ventilated area to prevent overheating and accumulation of exhaust gases.
• Oil and Lubrication: Use only recommended ISO grade 100/150 lubricating oil. Regularly check and maintain oil levels.
• Water and Condensate: Regularly drain condensate from the oil-water separator and drain valves to prevent corrosion and maintain air quality.
• Vedlikehold: Koble fra strømmen før du utfører vedlikehold eller rengjøring.
• Barn og tilskuere: Hold barn og tilskuere borte fra kompressoren som er i drift.

2. Produktet er overview

The TUXING TXEDB053 is a high-pressure air compressor designed for filling PCP rifles, paintball air guns, and diving scuba tanks. It features a four-stage compression system for efficient and rapid inflation.

Nøkkelfunksjoner:

• Strømforsyning: 110V single phase, 60Hz, 2.2KW / 3HP, 30AMP.
• Maksimalt trykk: Up to 20-30 Mpa / 200-300 Bar / 3000-4500 Psi.
• Strømningshastighet: 100 L/MIN / 3.5 CFM.
• Breathing Air Standard: Provides high-quality compressed air meeting EU EN12021 and GB18435-2001 standards.
• Komponenter: Includes pump, intake filter, belt, cooling fan, oil separator & filter, safety valve, pressure switch, starter, frame, and isolator.

Komponentidentifikasjon:

3. Oppsett

1. Utpakking: Carefully remove the compressor and all accessories from the packaging. Inspect for any shipping damage.
2. Plassering: Position the compressor on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure adequate space around the unit for air circulation and cooling.
3. Smøring: Fill the compressor with ISO grade 100/150 lubricating oil to the recommended level. Refer to the oil fill port (6) on the component diagram.
4. Filterinstallasjon: Ensure the air filter (intake filter) and carbon filter are correctly installed.
5. Elektrisk tilkobling: Connect the compressor to a dedicated 110V, 60Hz, 30A grounded power outlet. Avoid using extension cords if possible; if necessary, use a heavy-duty, grounded extension cord rated for the compressor's current draw.
6. Slangetilkobling: Attach the high-pressure hose to the quick plug-in air outlet (10) on the compressor.

4. Bruksanvisning

1. Klargjør tanken: Ensure the tank you intend to fill is rated for the desired pressure and is in good condition. Connect the high-pressure hose from the compressor to the tank's fill valve.
2. Åpne tankventilen: Slowly open the valve on the tank to be filled.
3. Start kompressor: Turn on the compressor. The unit will begin to build pressure.
4. Monitortrykk: Continuously monitor the pressure gauge (3) on the compressor and the gauge on your tank. The compressor is equipped with a safety valve (5) that will automatically leak if the pressure exceeds the maximum safe limit.
5. Automatisk avstenging: Some models may feature an automatic shut-off when the target pressure is reached. If not, manually turn off the compressor once the desired pressure is achieved.
6. Steng tankventilen: Once filling is complete, close the valve on the tank.
7. Slipp trykk: Slowly open the drain valve on the high-pressure hose to release any residual pressure before disconnecting the hose from the tank.
8. Drain Condensate: After each use, or regularly during extended operation, open the sewage valve (1) and oil-water separator drain valve to release accumulated moisture and oil.

5. Vedlikehold

Regular maintenance is crucial for the longevity and safe operation of your TUXING air compressor. Always disconnect the power supply before performing any maintenance.

• Kontroll av oljenivå: Check the oil level before each use. Add ISO grade 100/150 oil if necessary.
• Oljeskifte: Change the compressor oil after the first 20 hours of operation, then every 50-100 hours or every 3 months, whichever comes first.
• Drain Condensate: Drain the oil-water separator and sewage valve after each use to remove moisture and prevent corrosion.
• Filterbytte: Regularly inspect and replace the air intake filter and carbon filter elements as needed, typically every 20-30 hours of operation, or if you notice a decrease in air quality or flow.
• Rengjøring: Keep the exterior of the compressor clean and free of dust and debris. Ensure cooling fins and fans are unobstructed for efficient heat dissipation.
• Belte inspeksjon: Check the drive belt for wear and proper tension periodically.

6. Feilsøking

7. Spesifikasjoner

8. Garanti og støtte

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact TUXING customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Xiamen Subang Technology Co.,Ltd.

For further assistance, please visit the official TUXING webnettstedet eller kontakt din forhandler.