DEERC Brushless 302E RC Car Instruction Manual

1. Introduksjon

Takk for kjøpetasing the DEERC Brushless 302E RC Car. This 1:18 scale, 4WD high-speed remote control monster truck is designed for off-road performance and durability. Please read this manual thoroughly before operating the vehicle to ensure safe and optimal performance. Keep this manual for future reference.

Image 1.1: DEERC 302E Monster Truck with highlighted features.

2. Sikkerhetsregler

• Dette produktet anbefales for brukere fra 14 år. Tilsyn av voksne anbefales for yngre brukere.
• Always operate the RC car in open areas, away from people, pets, vehicles, and obstacles.
• Do not operate near water bodies, roads, or in crowded spaces.
• Avoid operating in adverse weather conditions such as strong winds, rain, or lightning.
• Sørg for at alle batteriene er riktig ladet og installert.
• Never touch moving parts of the vehicle during operation to prevent injury.
• Slå av kjøretøyet og fjernkontrollen når de ikke er i bruk.
• Do not attempt to modify or disassemble the product, as this may cause damage or injury and void the warranty.
• Kast batterier i henhold til lokale forskrifter.

3. Pakkens innhold

Vennligst sjekk innholdet i pakken når du pakker ut:

• DEERC Brushless 302E RC Car (1 unit)
• 2.4GHz Remote Control Transmitter (1 unit)
• 7.4V 1200mAh Li-Po Batteries (2 units)
• USB-ladekabel (1 enhet)
• Extra DIY Car Shell (1 unit)
• Brukerhåndbok (1 enhet)
• Small Tools/Accessories (e.g., wrench, spare clips)

Image 3.1: The DEERC 302E RC car includes two high-capacity batteries for extended play.

4. Produktet er overview

Familiarize yourself with the main components of your DEERC 302E RC Car and its remote control.

4.1 RC Car Components

• Børsteløs motor: Provides high speed and efficiency.
• 25A Brushless ESC: Electronic Speed Controller for precise motor management.
• 3-Wire Digital Servo: Offers high precision and quick response for steering.
• 4WD-system: Ensures strong power and traction on various terrains.
• Independent Suspension & Oil-Filled Metal Shocks: Absorbs impacts for stable driving.
• Sklisikre gummidekk: Provides excellent grip.
• Nylon Chassis: Durable and lightweight frame.
• Kulelager: Reduces friction for smoother operation.
• IPX4 Waterproof Level: Protects against splashing water and waves.

Image 4.1: Internal components of the DEERC 302E RC Car.

Image 4.2: The RC car demonstrating its IPX4 waterproof level.

4.2 Fjernkontrollsender

• Ratt: Controls the direction of the vehicle (left/right).
• Gassutløser: Controls forward/backward movement and braking.
• Strømbryteren: Slår senderen på/av.
• Styretrim: Adjusts the neutral steering position.
• Hastighetsbryter: Adjusts the maximum speed of the vehicle.
• Indikatorlys: Viser strøm- og tilkoblingsstatus.

Image 4.3: 2.4GHz Remote Control Transmitter layout.

5. Oppsett

5.1 Charging the Li-Po Batteries

1. Connect the USB charging cable to a USB power adapter (not included, 5V/2A recommended).
2. Koble batteriet til ladekabelen.
3. The indicator light on the USB charger will show charging status (e.g., red for charging, green for fully charged).
4. Lading tar vanligvis 2–3 timer per batteri. Ikke overlad.

5.2 Installing Batteries in the RC Car

1. Remove the car shell by detaching the body clips.
2. Åpne batteridekselet.
3. Insert a fully charged Li-Po battery into the compartment.
4. Koble batterikontakten til bilens strømkontakt.
5. Close the battery compartment and reattach the car shell.

5.3 Sette inn batterier i fjernkontrollen

1. Åpne batteridekselet på baksiden av fjernkontrollen.
2. Insert 3 x AA batteries (not included) according to the polarity markings.
3. Lukk batteridekselet.

5.4 Binding the Remote Control to the RC Car

1. Ensure the RC car battery is connected and the car's power switch is OFF.
2. Turn ON the remote control transmitter. The indicator light will flash.
3. Turn ON the RC car's power switch.
4. The indicator light on the remote control will become solid, indicating a successful binding.
5. If binding fails, turn off both devices and repeat the steps.

6. Bruksanvisning

6.1 Starte kjøretøyet

1. Place the RC car on a flat surface.
2. Ensure the remote control is ON and bound to the car.
3. Gently pull the throttle trigger to move forward, and push it to move backward or brake.
4. Turn the steering wheel left or right to change direction.

6.2 Adjusting Speed and Steering

• Hastighetsbryter: Located on the remote control. Turn clockwise to increase the maximum speed, and counter-clockwise to decrease it. This allows for controlled driving, especially for beginners.
• Styretrim: If the car does not drive straight when the steering wheel is centered, use the steering trim dial on the remote control to fine-tune the alignment.
• The remote control offers proportional throttle and steering, allowing for precise control over speed and direction.

Image 6.1: The RC car performing on different terrains.

6.3 Stopping and Storing

1. Bring the car to a complete stop.
2. Turn OFF the power switch on the RC car.
3. Turn OFF the power switch on the remote control.
4. Disconnect and remove the battery from the RC car for storage.

7. Vedlikehold

7.1 Rengjøring

• After each use, especially in dirty or dusty conditions, clean the car.
• Bruk en myk børste eller trykkluft for å fjerne smuss og rusk fra chassis, hjul og fjæringskomponenter.
• Wipe the body with a soft, dry cloth. Avoid using water directly on electronic components.

7.2 Batteristell

• Always disconnect batteries from the car and charger when not in use.
• Store Li-Po batteries in a cool, dry place, away from direct sunlight and heat sources.
• Do not store fully charged or completely discharged Li-Po batteries for extended periods. Charge them to a storage voltage (around 3.8V per cell) if storing for more than a few days.
• If a battery appears swollen or damaged, discontinue use immediately and dispose of it safely.

7.3 Komponentinspeksjon

• Sjekk regelmessig alle skruer og festemidler for å sikre at de er stramme.
• Inspect the tires for wear and tear.
• Check the suspension for any damage or bent parts.
• Ensure the wheel hub metal sheets are intact to prevent deformation.

Image 7.1: Wheel hub metal sheet for enhanced durability.

8. Feilsøking

9. Spesifikasjoner

Bilde 9.1: Produktmål.

10. Garanti og støtte

DEERC products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included in your package or contact DEERC customer support directly.

If you encounter any issues or have questions regarding your DEERC Brushless 302E RC Car, please contact our customer support team. Provide your model number and purchase details for faster assistance.

Kundestøttekontakt: Please refer to the contact information provided on the product packaging or the official DEERC webnettstedet.