AMOCAM K10ID Universal Wired Access Control Keypad Instruction Manual

1. Introduksjon

This manual provides detailed instructions for the installation, programming, and operation of your AMOCAM K10ID Universal Wired Access Control Keypad. This robust, IP68 waterproof keypad offers secure access through PIN codes and ID cards, suitable for various applications including garage doors, gate openers, and other access control systems. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Produktfunksjoner

• Bred kompatibilitet: Works with most gate openers and garage door openers that accept a 'Dry Contact' signal or wired Standard Wall Button. Not compatible with Wi-Fi, learn buttons, safety sensors, or rolling code protocols.
• Multiple Access Modes: Supports up to 2000 users with three working modes: PIN Code, ID Card, or PIN Code + ID Card.
• Slitesterk konstruksjon: Features a zinc alloy housing, LED backlight metal buttons, and internal epoxy potting for IP68 waterproof and dustproof rating, ideal for outdoor use.
• Sikker drift: User data is stored locally on the keypad for secure offline control, requiring no internet connection or additional software.
• Enkel installasjon: Designed for DIY installation and programming.
• Inkludert tilbehør: Comes with 5 ID keyfobs.
• Allsidige bruksområder: Suitable for households, courtyards, warehouses, schools, office buildings, magnetic locks, and electric strike door locks.
• Wiegand 26 Output: Can function as an extra card reader.

Image: AMOCAM K10ID Keypad highlighting its key features such as ID card and password unlock, IP68 waterproof rating, backlight keys, full metal housing, epoxy sealing, support for 2000 users, and 125KHz ID card compatibility.

3. Installasjon

3.1. Kompatibilitetssjekk

Before installing, verify your garage door or gate opener's compatibility:

• Compatible if: The opener uses a standard wall push button or can be controlled by a momentary push button switch (dry contact signal).
• Not Compatible if: The opener uses wireless/learn button remotes only (no physical wall button wires), safety sensors or rolling code protocols without dry contact, Wi-Fi, Bluetooth, smart hubs, or proprietary digital connections.

Image: Diagram illustrating compatible garage door/gate opener setups, including those with a wired standard wall button or control boards that accept a dry contact signal via shorting terminals.

3.2. Koblingsskjemaer

The keypad operates on 12V DC power (power supply not included). Ensure all connections are secure and correct before applying power.

3.2.1. Wired Connection with Garage Door/Gate Opener

Connect the keypad to your garage door or gate opener as follows:

• Connect the keypad's blå og lilla wires to the garage door/gate opener's wall push button switch or wall push button terminals.
• Connect the keypad's rød og svart wires directly to a 12V DC power supply (not included).
• Other wires are typically not used for this application.

Image: Detailed wiring diagram showing how to connect the keypad to a garage door or gate opener, including the 12V DC power supply and the 2-wire wall push button terminals.

3.2.2. Wired Connection with Lock for Common Power

For connecting to a lock using a common power supply:

• Refer to the diagram for specific connections for BELL_A (Pink), BELL_B (Pink), D0 (Green), D1 (White), OPEN (Yellow), COM (Purple), GND (Black), NO (Blue), NC (Orange), and +12V (Red).
• Ensure the 12V DC power supply (not included) is correctly wired to both the keypad and the lock.

Image: Wiring diagram illustrating the connection of the keypad to an electric lock system, sharing a common 12V DC power supply, with specific wire color assignments for various functions.

3.2.3. Wired Connection with Lock for Special Power

For connecting to a lock using a separate power supply:

• Refer to the diagram for specific connections for BELL_A (Pink), BELL_B (Pink), D0 (Green), D1 (White), OPEN (Yellow), COM (Purple), GND (Black), NO (Blue), NC (Orange), and +12V (Red).
• A separate 12V DC power supply (not included) is used for the lock, distinct from the keypad's power.

Image: Wiring diagram detailing the connection of the keypad to an electric lock system with a dedicated, separate power supply for the lock, showing distinct wiring for keypad and lock power.

4. Drift

The keypad indicator blinks when in standby mode.

4.1. Gå inn i programmeringsmodus

1. Trykk på * nøkkel.
2. Input the admin password (default is 999999).
3. Trykk på # key to confirm. The keypad will indicate successful entry into programming mode.

4.2. Adding ID Cards

To add ID cards (keyfobs) to the system:

1. Enter programming mode (see 4.1).
2. Pressen 1 to select the 'Add Card' function.
3. Tap each ID keyfob or card you wish to add to the keypad's card reading zone. The keypad will beep to confirm each addition. You can add multiple cards continuously.
4. After adding all desired cards, press the # key to finalize the additions.
5. Trykk på * key to exit programming mode.

4.3. Adding User Codes

To add a new user code to the system:

1. Enter programming mode (see 4.1).
2. Pressen 1 to select the 'Add User' function.
3. Input a user number (e.g., 25) and press the # tasten for å bekrefte.
4. Input a 4-digit user code (e.g., 3690) and press the # tasten for å bekrefte.
5. Trykk på * key twice to exit programming mode.

4.4. Opplåsing

To unlock the connected device:

• Using ID Card: Tap a registered ID card or keyfob on the keypad's card reading zone.
• Bruk av PIN-kode: Enter your registered 4-digit PIN code followed by the # nøkkel.

The keypad will indicate successful unlocking, and the connected device (e.g., garage door, gate, lock) will activate.

Image: A user demonstrating the ID card unlock method by tapping a card on the keypad. The image also shows the keypad's numeric buttons and bell icon.

5. Spesifikasjoner

Bilde: En detaljert view of the AMOCAM K10ID keypad with its physical dimensions clearly marked, showing its compact and robust design.

6. Vedlikehold

• Rengjøring: Bruk en myk, damp cloth to clean the keypad surface. Avoid abrasive cleaners or solvents that could damage the finish or electronics.
• Miljøvern: Although IP68 rated, avoid prolonged submersion or exposure to extreme conditions beyond its operating specifications.
• Regelmessige kontroller: Periodically inspect wiring for any signs of wear or damage. Ensure all connections remain secure.
• Fastvareoppdateringer: No user-serviceable firmware updates are typically required for this device.

7. Feilsøking

• Tastaturet svarer ikke: Check the 12V DC power supply connection. Ensure power is correctly supplied to the red and black wires.
• Cannot Enter Programming Mode: Verify the admin password (default 999999). Ensure you are pressing the * key first, then the password, then the # key.
• ID Card/PIN Code Not Unlocking: Ensure the ID card or PIN code has been correctly added and registered in the system. Re-add if necessary. Check that the keypad is not in programming mode.
• Tilkoblet enhet aktiveres ikke: Verify the wiring between the keypad's blue and purple wires and the garage door/gate opener or lock. Ensure the opener/lock is compatible and functioning correctly independently.
• Intermitterende operasjon: Check for loose wiring connections or potential interference. Ensure the power supply is stable.

8. Sikkerhetsinformasjon

• Always disconnect power before performing any wiring or maintenance.
• Sørg for riktig jording av alle elektriske komponenter.
• Do not attempt to disassemble or repair the keypad yourself. Refer to qualified personnel for service.
• Keep the keypad and its components out of reach of children.
• Use only the specified 12V DC power supply. Using an incorrect voltage kan skade enheten.

9. Garanti og støtte

For warranty information, technical support, or further assistance, please contact AMOCAM customer service through the retailer's platform or the official AMOCAM website. Please have your product model (K10ID) and purchase details ready when contacting support.