Produkt overview
The AUGUESLD T160HS is a versatile 2.0 channel stereo amplifier board designed for high-quality audio amplification. It features multiple input methods including Bluetooth, 3.5mm AUX, and USB, making it compatible with a wide range of audio devices. Equipped with the TDA7498E chip, this amplifier board delivers clear sound with minimal distortion. It also includes comprehensive safety protections and intuitive controls for an enhanced user experience.
- Flere inndatametoder: Supports Bluetooth, 3.5mm AUX, and USB for broad compatibility.
- TDA7498E Chip: Ensures high-quality audio amplification with low distortion.
- Multifunksjonell knott: Provides flexible control over input modes, track selection, and settings.
- Sikkerhetsbeskyttelse: Features overheat, reverse, circuit, over-voltage, og under-voltage beskyttelse.
Oppsettinstruksjoner
Follow these steps to correctly set up your T160HS amplifier bord.
1. Strømtilkobling
Connect a DC 12-36V power supply to the DC input port (DC12-38V) on the board. Ensure the power supply meets the voltage and current requirements (minimum 8A recommended for full power output).
Bilde: Overview av amplifier board with power input and output labels.
2. Høyttalertilkobling
Connect your passive speakers to the "L" (Left) and "R" (Right) speaker output terminals. Ensure correct polarity (+ to + and - to -) for optimal sound quality.
Bilde: Amplifier board showing speaker connections and a mobile device.
3. Audio Input Selection
The T160HS supports multiple audio input methods. Select your preferred method:
- Bluetooth-inngang: Power on the device. The ampLifier vil automatisk gå inn i Bluetooth-paringsmodus. Søk etter "T160HS" on your device and connect.
- 3.5 mm AUX-inngang: Connect your audio source (e.g., phone, computer) to the 3.5mm AUX input jack using an audio cable.
- USB-inngang: Sett inn en USB-flash-stasjon som inneholder lyd files into the USB port. The device will automatically switch to USB playback mode.
Image: Visual representation of the four available input methods.
Bruksanvisning
Understand how to use the controls on your T160HS amplifier bord.
Multifunctional Knob Operations
The main knob serves multiple functions:
- Langt trykk: Standby / Power ON.
- Enkeltklikk: Play / Pause audio.
- To klikk: Neste sang.
- Three Clicks: Forrige sang.
- Fire klikk: Switch Input Mode (Bluetooth, AUX, USB).
- Fem klikk: Fabrikkinnstilling.
- Rotasjon: Juster volumet.
Image: Close-up of the main volume knob with its various functions indicated.
Diskant- og basskontroll
Use the dedicated "R&L Treble" and "R&L Bass" knobs to adjust the high and low frequencies of the audio output according to your preference.
Bilde: Amplifier board highlighting the treble, bass, and volume adjustment knobs.
Vedlikehold
Riktig vedlikehold sikrer levetiden og optimal ytelse til din amplifier bord.
- Rengjøring: Gently wipe the surface of the board with a dry, soft cloth. Avoid using liquid cleaners or solvents.
- Miljø: Behold amplifier board in a dry, well-ventilated area, away from direct sunlight, high temperatures, and excessive humidity.
- Avkjøling: The board is equipped with an ultra-quiet cooling fan and a large aluminum heat sink to manage temperature. Ensure the fan is not obstructed to allow proper airflow.
Bilde: View av amplifier's cooling fan and the TDA7498E chip.
Feilsøking
Hvis du støter på problemer, kan du se følgende vanlige problemer og løsninger.
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Ingen strøm / Enheten slår seg ikke på | Feil strømforsyning voltage or current; Power cable not connected; Power switch off. | Ensure DC 12-36V power supply is connected correctly. Verify power supply meets current requirements (8A or above). Long press the main knob to power on. |
| Ingen lydutgang | Speakers not connected; Incorrect input mode selected; Volume too low; Audio source issue. | Check speaker connections and polarity. Use four clicks on the main knob to switch to the correct input mode. Increase volume. Verify audio source is playing. |
| Forvrengt lyd | Input signal too high; Speaker impedance mismatch; Power supply insufficient. | Reduce volume from the audio source. Ensure speakers are compatible (4Ω or 8Ω). Use a power supply with sufficient current (e.g., 36V/8A). |
| Problemer med Bluetooth-tilkobling | Device not in pairing mode; Too far from amplifier; Interference. | Sikre amplifier is in Bluetooth mode. Keep devices within range (approx. 50ft line of sight). Try restarting both devices. |
| USB-avspilling fungerer ikke | Uriktig file format; USB drive not recognized. | Sørg for lyd files are in supported formats (WAV, FLAC, APE, MP3). Try a different USB drive. |
If the problem persists, try performing a factory reset by clicking the main knob five times. If issues continue, please contact customer support.
Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modell | T160HS |
| Utgangseffekt | 160W x 2 (4Ω/36VDC), 80W x 2 (8Ω/36VDC), 70W x 2 (4Ω/24VDC), 35W x 2 (8Ω/24VDC) |
| Kanaler | 2.0 Stereo |
| Amplifier Chip | TDA7498E |
| Inngang Voltage | DC 12-36V |
| Tilførselsstrøm | 8A or above recommended |
| Inndatametoder | Bluetooth 5.1, 3.5mm AUX, USB Flash Drive, USB Sound Card |
| Decoding Format (USB) | WAV, FLAC, APE, MP3 |
| Frekvensområde | 20Hz - 20KHz |
| Beskyttelsesmekanismer | Overheat, Reverse, Circuit, Over-voltage, Under-voltage, Clipping, Short Circuit |
| Produktdimensjoner (L x B x H) | 12.8 x 9.5 x 2.6 cm (5.03 x XUMX x 3.74 inches) |
Image: Graphic displaying key technical specifications of the amplivligere.
Garanti og støtte
AUGUESLD is committed to providing quality products and customer satisfaction.
For any questions regarding the product, or if you experience any quality-related issues, please contact AUGUESLD customer service. Our support team is available to provide a satisfactory resolution.
Se kjøpsdokumentasjonen eller forhandlerens webnettstedet for spesifikke garantivilkår og kontaktinformasjon.