Moman CP-S Motorcycle Intercom System User Manual

1. Introduksjon

The Moman CP-S Motorcycle Intercom System is designed to provide clear and reliable communication for motorcyclists. Featuring advanced Bluetooth 5.1 technology, noise reduction, and a robust waterproof design, it enhances your riding experience by allowing group communication, music sharing, and hands-free phone calls.

Figure 1: Moman CP-S Intercom Unit with key features.

2. Pakkens innhold

The Moman CP-S package includes the following items:

• Moman CP-S Intercom Unit
• Headphone and Microphone Set
• Mounting Clip (for helmet edge)
• Adhesive Mount (for helmet surface)
• USB ladekabel
• Interchangeable Decorative Shells (3 colors)
• Brukerhåndbok
• Installation Tools (screwdriver)

3. Installasjonsveiledning

Proper installation ensures optimal performance and comfort. Follow these steps to install your Moman CP-S intercom system on your helmet.

3.1. Preparing the Helmet

1. Remove the helmet's inner lining and cheek pads if they are removable. This provides easier access for speaker and microphone placement.
2. Identify suitable locations for the speakers (near your ears) and the microphone (near your mouth).

3.2. Montering av intercom-enheten

Choose between the clip mount or the adhesive mount based on your helmet type and preference.

Using the Clip Mount:

1. Loosen the screws on the clip mount using the provided screwdriver.
2. Slide the clip mount onto the bottom edge of your helmet, ensuring it is securely fastened.
3. Tighten the screws to secure the clip mount in place.

Using the Adhesive Mount:

1. Clean the desired mounting area on the side of your helmet thoroughly.
2. Peel off the protective film from the adhesive mount and firmly press it onto the helmet surface for at least 30 seconds. Allow sufficient time for the adhesive to bond before attaching the intercom unit.

Attaching the Intercom Unit:

1. Slide the Moman CP-S intercom unit onto the installed clip or adhesive mount until it clicks securely into place.

3.3. Installere høyttalere og mikrofon

1. Attach the adhesive pads to the back of the speakers.
2. Carefully place the speakers inside the helmet, aligning them with your ears. Press firmly to secure.
3. Attach the adhesive pad to the microphone.
4. Position the microphone near your mouth, ensuring it is not obstructed by the helmet's padding.
5. Connect the speaker and microphone cables to the appropriate ports on the intercom unit.

3.4. Kabeladministrasjon

Tuck all excess cables neatly under the helmet's inner lining to prevent discomfort and ensure they do not interfere with helmet function. Reinstall any removed inner lining or cheek pads.

4. Bruksanvisning

4.1. Slå på/av

• Strøm på: Press and hold the Power button for 3 seconds until the indicator light turns on.
• Slå av: Trykk og hold inne av/på-knappen i 3 sekunder til indikatorlampen slukkes.

4.2. Bluetooth-paring

1. With the device off, press and hold the Function button for 3 seconds. The red and blue indicator lights will flash, indicating pairing mode.
2. On your mobile phone, enable Bluetooth and search for "FODSPORTS FX-S" (or similar device name). Select it to pair. The pairing is complete when the indicator light changes.

4.3. Musikkavspilling

• Spill av/pause: Trykk kort på funksjonsknappen.
• Neste sang: Rotate the control knob forward once.
• Forrige sang: Rotate the control knob backward once.
• Volumjustering: Rotate the control knob forward or backward for 1 second to increase or decrease volume.

Figure 2: Music sharing feature between two riders.

4.4. Telefonsamtaler

• Svar/avslutt samtale: Trykk kort på funksjonsknappen.
• Avvis anrop: Long press the Function button for 1 second.
• Stemmeassistent: Single click to activate AI voice assistant (e.g., Siri, Google Assistant).
• Bytt manuelt/automatisk svar på anrop: Long press the Function button and ON/OFF button for 3 seconds.

Figure 3: AI Voice Assistant and FM Radio features.

4.5. Intercom-kommunikasjon

• The Moman CP-S supports intercom communication for up to 8 riders within a 2000m range, and 2 riders within a 1000m range.
• It is compatible with other intercom brands.

Figure 4: Group intercom communication range and capabilities.

4.6. FM-radio

• Activate the FM radio function to listen to broadcasts while riding.

5. Spesifikasjoner

Figur 5: Batterilevetid og ladedetaljer.

Figure 6: IP65 Water and Dust Resistance.

6. Vedlikehold

• Hold enheten ren og tørr. Tørk av med en myk klut.amp klut.
• Unngå å utsette enheten for ekstreme temperaturer eller direkte sollys i lengre perioder.
• Sørg for at ladedekselet er ordentlig lukket når den ikke lader, for å opprettholde vanntettheten.
• Lad enheten regelmessig, selv om den ikke er i bruk, for å opprettholde batterilevetiden.

7. Feilsøking

7.1. Ingen strøm

• Ensure the battery is charged. Connect the device to a power source using the provided USB cable.
• Check if the power button is being held for the correct duration (3 seconds).

7.2. Kan ikke pares med telefonen

• Ensure the device is in pairing mode (red and blue indicator lights flashing).
• Slå av og på telefonens Bluetooth.
• Ensure the device is within range of your phone.
• Forget previous Bluetooth connections on your phone and try pairing again.

7.3. Poor Audio Quality/Noise

• Ensure speakers are correctly positioned near your ears and the microphone is close to your mouth.
• Check for any obstructions around the microphone.
• Verify that the volume is adjusted appropriately.
• The device features DSP and CVC noise reduction, which should minimize ambient noise. If issues persist, ensure the microphone is not picking up excessive wind noise.

Figure 7: Audio quality and noise reduction technology.

8. Garanti og støtte

The Moman CP-S Motorcycle Intercom System comes with a 2-year manufacturer's warranty. For technical support, warranty claims, or any other inquiries, please contact Moman customer service through their official channels.