sweeek Avalon Storage Bed with Slatted Base and Headboard

Viktig sikkerhetsinformasjon

Les alle instruksjonene nøye før montering og bruk. Ta vare på denne håndboken for senere referanse.

• Sørg for at alle deler er til stede og uskadet før monteringen starter.
• Monter sengen på en myk, ren overflate for å unngå riper.
• Ikke stram skruene for hardt under montering.
• Hold små deler unna barn under montering.
• Sjekk regelmessig alle festemidler for å sikre at de holder seg stramme.
• Ikke stå eller hopp på sengen.
• Distribute weight evenly when using the storage compartment.

Pakkeinnhold

Kontroller at alle komponentene er inkludert i pakken din:

• Bed frame components (side rails, footboard)
• Sengegavl
• Slatted base with lifting mechanism
• Storage compartment base panels
• Maskinvarepakke (skruer, bolter, skiver, unbrakonøkkel)
• Monteringsanvisning

Merk: Madrass er ikke inkludert.

Monteringsveiledning

Tools required: Phillips head screwdriver (not included), Allen key (included).

1. Pakk ut og identifiser delene: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Compare each part to the parts list in the included assembly diagram to ensure everything is present.
2. Monter sengerammen: Attach the side rails to the headboard and footboard using the provided bolts and washers. Ensure all connections are secure but do not fully tighten until the frame is complete.
3. Install the Storage Base: Place the base panels for the storage compartment into the designated slots within the bed frame. These panels form the bottom of the storage area.
4. Attach the Slatted Base and Lifting Mechanism: Secure the slatted base frame to the bed frame using the provided hardware. Attach the gas lift mechanism according to the detailed diagram in your separate assembly guide. Ensure the mechanism operates smoothly before proceeding.
5. Endelig tilstramming: Når alle komponentene er på plass og justert, stram alle skruer og bolter helt til. Ikke stram for mye.

Operating the Storage Bed

The sweeek Avalon storage bed features a convenient gas lift mechanism for easy access to the under-bed storage compartment.

• Åpne: Remove the mattress from the bed. Grasp the fabric handle located at the foot end of the slatted base. Gently lift the base upwards. The gas lift mechanism will assist in raising and holding the base in the open position.
• Å lukke: Grasp the fabric handle and gently pull the slatted base downwards. Apply slight pressure to overcome the gas lift resistance until the base fully lowers and rests securely on the bed frame.
• Sikkerhetsforholdsregler: Always remove the mattress before opening the storage compartment. Do not place hands or objects in the mechanism while opening or closing. Ensure the base is fully closed before placing the mattress back on the bed.

Stell og vedlikehold

• Stoffpleie: For general cleaning, gently vacuum the fabric upholstery with a soft brush attachment. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
• Rammepleie: Tørk av sengerammen med en myk klutamp klut. Unngå å bruke sterke kjemikalier eller slipende rengjøringsmidler, da disse kan skade overflaten.
• Regelmessige kontroller: Periodically check all bolts and screws to ensure they are tight. Retighten if necessary to maintain stability and prevent squeaking.
• Ventilasjon: The slatted base provides optimal ventilation for your mattress. Ensure the storage compartment is not overfilled to allow for air circulation.

Feilsøking

Spesifikasjoner

Garanti og støtte

For information regarding warranty coverage or to obtain customer support, please refer to the documentation provided with your purchase or visit the official sweeek website. If you encounter any issues not covered in this manual, please contact sweeek customer service for assistance.