Reliablit Satin Nickel Electronic Deadbolt with Keypad & Passage Door Handle User Manual

Introduksjon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Reliablit Satin Nickel Electronic Deadbolt with Keypad and Passage Door Handle. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

Bilde: Foran view of the Reliablit electronic deadbolt and the accompanying passage door handle in satin nickel finish.

Sikkerhetsinformasjon

• Følg alltid lokale byggeforskrifter og forskrifter under installasjonen.
• Do not use abrasive cleaners or solvents on the lock's finish. Use a soft, damp klut for rengjøring.
• Ensure batteries are inserted with correct polarity. Replace all batteries at the same time.
• Oppbevar nøklene på et trygt sted, unna låsen.
• Avoid exposing the electronic components to excessive moisture or extreme temperatures.

Pakkeinnhold

Before beginning installation, verify that all parts are present:

• Electronic Deadbolt Assembly (Exterior Keypad and Interior Unit)
• Passage Door Handle Assembly
• Deadbolt Lås
• Streikeplate
• Monteringsskruer
• Keys (for deadbolt)
• Brukerhåndbok
• 1 x 9V Battery (may be included or sold separately, check packaging)
• Screwdriver (may be included or sold separately, check packaging)

Oppsett og installasjon

The Reliablit electronic deadbolt and passage handle are designed for easy installation, typically requiring only a screwdriver. Ensure your door thickness is between 1-3/8 inches and 1-3/4 inches.

1. Klargjør døren

Ensure the door is properly prepped with standard bore holes for both the deadbolt and the passage handle. If replacing an existing lock, remove the old hardware.

2. Install the Deadbolt Latch

Insert the deadbolt latch into the edge bore hole of the door. Ensure the "UP" arrow on the latch is facing upwards. Secure with screws.

Bilde: Nærbilde view of the electronic keypad deadbolt, showing the numerical buttons and keyhole.

3. Install the Exterior Keypad Assembly

Feed the cable from the exterior keypad through the cross bore hole. Align the keypad assembly with the deadbolt latch and secure it to the door.

Bilde: Side view of the electronic deadbolt and passage handle installed on a door, demonstrating how the components fit together.

4. Install the Interior Unit

Connect the cable from the exterior keypad to the interior unit. Mount the interior unit onto the door, ensuring the deadbolt spindle engages correctly with the latch mechanism. Secure with mounting screws.

5. Sett inn batterier

Open the battery cover on the interior unit. Insert one 9V battery, ensuring correct polarity. Close the battery cover. The lock will perform a self-check.

6. Install Passage Door Handle

Follow the manufacturer's instructions for installing the passage door handle below the deadbolt. This typically involves inserting the spindle through the door and securing the interior and exterior levers.

Bilde: Nærbilde view of the passage door handle in satin nickel finish.

Bruksanvisning

Nøkkelfri inngang

To unlock the deadbolt using the keypad:

1. Enter your programmed user code (4-8 digits).
2. Press the "Lock/Unlock" button (often represented by a padlock icon).
3. The deadbolt will retract, allowing the door to be opened.

Ettrykkslåsing

To lock the deadbolt from the outside:

• Simply press the "Lock/Unlock" button on the keypad. The deadbolt will extend.

Manuell drift

• Utenfra: Use the provided key to manually lock or unlock the deadbolt.
• Fra innsiden: Use the turn button on the interior unit to manually lock or unlock the deadbolt.

Programmering av brukerkoder

The lock supports up to 30 unique user codes. Refer to the specific programming instructions included with your lock for detailed steps on adding, deleting, or modifying user codes. This typically involves using a master code to enter programming mode.

Vedlikehold

• Batteribytte: The 9V battery typically lasts up to 3 years. Replace the battery when the low battery indicator activates (if applicable) or if the lock's operation becomes sluggish. Always replace with a new, high-quality 9V alkaline battery.
• Rengjøring: Clean the lock's exterior with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used. Avoid harsh chemicals, abrasive cleaners, or polishes as they can damage the finish and electronic components.
• Smøring: Periodically lubricate the deadbolt latch mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the keypad or electronic components.

Feilsøking

Spesifikasjoner

Garanti og støtte

RELIABILT provides a comprehensive warranty for this product:

• Mekanisk og finishgaranti: Livstidsgaranti.
• Elektronikkgaranti: 1 års garanti.

For full details regarding warranty coverage, terms, and conditions, please refer to the official RELIABILT warranty documentation or visit the RELIABILT website. For technical support, troubleshooting assistance, or warranty claims, please contact RELIABILT customer service directly.