HAKINAKU HD09

HAKINAKU bærbar karbonmonoksiddetektor (HD09) brukerhåndbok

Modell: HD09

1. Introduksjon

This manual provides essential information for the safe and effective operation of your HAKINAKU HD09 Portable Carbon Monoxide Detector. This device is designed to monitor carbon monoxide (CO) levels, temperature, and humidity in various environments. Please read this manual thoroughly before use and retain it for future reference.

HAKINAKU HD09 Portable Carbon Monoxide Detector showing CO, humidity, and temperature readings

Figure 1: HAKINAKU HD09 Portable Carbon Monoxide Detector with display showing CO, humidity, and temperature.

2. Sikkerhetsinformasjon

WARNING: This device is intended to detect carbon monoxide gas. It is not a substitute for proper maintenance of fuel-burning appliances, including ventilation systems, nor is it a substitute for visual inspection of such appliances. Carbon monoxide is a colorless, odorless, and non-irritating gas that can be fatal.

  • Ikke blokker ventilasjonshullene på enheten.
  • Ikke utsett enheten for ekstreme temperaturer eller fuktighet.
  • Hold enheten unna direkte flamme eller varmekilder.
  • Do not attempt to disassemble or repair the device. Contact customer support if service is required.
  • Test the device regularly as described in this manual.

Gjør deg kjent med symptomene på karbonmonoksidforgiftning:

  • Mild eksponering: Slight headache, nausea, vomiting, fatigue (often described as 'flu-like' symptoms).
  • Middels eksponering: Severe headache, dizziness, drowsiness, confusion.
  • Ekstrem eksponering: Bevisstløshet, kramper, kardiorespiratorisk svikt, død.

If the alarm sounds, immediately move to fresh air and seek medical attention. Do not re-enter the area until the source of CO has been identified and corrected, and the area has been properly ventilated.

3. Produktet er overview

The HAKINAKU HD09 is a compact, multi-functional detector designed for portability and ease of use. It features a clear display and intuitive controls.

3.1 Komponenter

  • Hovedenhet: Portable detector with integrated display and buttons.
  • Nøkkelbånd: For convenient carrying or hanging.
  • Støtte: Integrated foldable stand for desktop placement.
  • USB-C ladekabel: For lading av det interne batteriet.

3.2 Displayelementer

The HD screen displays the following information:

  • CO Concentration: Measured in Parts Per Million (PPM).
  • Fuktighet: Vises som en prosenttage (%RF).
  • Temperatur: Displayed in Fahrenheit (°F) or Celsius (°C).
  • Batterinivåindikator: Viser gjenværende batterilevetid.
  • Sound Status Indicator: Shows if the alarm sound is active or muted.
HAKINAKU HD09 Portable Carbon Monoxide Detector with kickstand, showing display elements and buttons

Figur 2: Foran view of the HAKINAKU HD09 showing the display and control buttons.

3.3 Kontrollknapper

  • Power Button (Middle): Long press to power on/off. Short press to cycle through display modes or confirm settings.
  • 'G' Button (Left): Justerer skjermens lysstyrke.
  • 'S' Button (Right): Toggles sound on/off. Also switches between Fahrenheit and Celsius for temperature display.

4. Oppsett

4.1 Innledende lading

Before first use, fully charge the device using the provided USB-C cable. Connect the USB-C end to the detector's charging port and the USB-A end to a compatible power adapter (not included).

Close-up of the HAKINAKU HD09 showing the USB-C charging port on the side

Figure 3: USB-C charging port location on the side of the device.

4.2 Plasseringsalternativer

The HD09 offers versatile placement options:

  • Støtte: Fold out the integrated kickstand on the back to place the device on any flat surface.
  • Nøkkelbånd: Use the included lanyard to hang the device from a hook, backpack, or other suitable fixture.
  • Veggfeste: The back of the device includes a screw buckle hole for permanent wall mounting (screws not included).
Three images showing the HAKINAKU HD09 being used with its kickstand, wall-mounted, and hanging by its lanyard

Figure 4: Various carrying and placement options for the HAKINAKU HD09.

5. Bruksanvisning

5.1 Strøm på/av

To power on the device, long press the middle Power Button until the screen illuminates. To power off, long press the Power Button again until the screen turns off.

5.2 Skjermmoduser og innstillinger

  • Skjermens lysstyrke: Short press the 'G' button (left) to adjust the screen brightness.
  • Temperaturenhet: Short press the 'S' button (right) to switch the temperature display between Fahrenheit (°F) and Celsius (°C).
  • Lydkontroll: Long press the 'S' button (right) to toggle the alarm sound on or off. The sound status indicator on the display will change accordingly.

5.3 Sanntidsovervåking

Once powered on, the device will immediately begin monitoring carbon monoxide levels, temperature, and humidity. Readings are updated in real-time on the HD screen.

HAKINAKU HD09 display showing real-time CO, humidity, and temperature readings with alarm thresholds

Figure 5: Real-time detection display with CO, humidity, and temperature values.

5.4 Testing av detektoren

To verify the CO detection function, expose the device to a small amount of carbon monoxide. A common method is to bring it close to a lit cigarette or burning paper that produces thick smoke. The CO concentration on the screen should increase, and the alarm should activate if levels exceed the threshold. Do not test with car exhaust or in overly airy places, as low CO concentrations may not trigger the sensor.

Video 1: Demonstration of the HAKINAKU HD09 portable carbon monoxide detector in operation, showing its display and features.

Video 2: Overview of the HAKINAKU HD09 3-in-1 CO detector, highlighting its compact design and monitoring capabilities.

6. Alarminformasjon

The HAKINAKU HD09 features an electrochemical sensor for accurate CO detection and an 85dB alarm to alert users to dangerous levels. The alarm behavior varies based on CO concentration:

Carbon Monoxide Alarm Thresholds
CO Concentration (PPM)AlarmindikasjonPotensiell fare
0-49 PPMGreen flame icon, No audible alarm.Normal level (up to 8 hours in OSHA enclosed space).
50-100 PPMYellow flame icon, 3 alerts in 3 minutes.OSHA Exposure Limits.
101-200 PPMOrange flame icon, 5 alerts in 5 minutes.Mild headache, fatigue, nausea, dizziness.
> 200 PPMRed flame icon, Continuous alarm.Dizziness, nausea, convulsions, death within 2 to 3 hours.

Upon alarm activation, follow the safety procedures outlined in Section 2.

7. Placement and Usage Scenarios

The portable design of the HD09 makes it suitable for various indoor and outdoor environments where carbon monoxide monitoring is crucial.

  • Reise: Ideal for hotel rooms, rental properties, or temporary accommodations.
  • Campfriluftsaktiviteter: Monitor CO levels in tents, RVs, boats, or near portable heaters/stoves.
  • Hjemmebruk: Place in bedrooms, living rooms, kitchens, or any area with fuel-burning appliances.
HAKINAKU HD09 hanging inside a tent, indicating suitability for camping

Figure 6: The HD09 detector hanging inside a tent for camping safety.

HAKINAKU HD09 hanging in a car, indicating suitability for vehicle use

Figure 7: The HD09 detector hanging in a car for vehicle safety.

HAKINAKU HD09 on a nightstand next to a sleeping person, indicating suitability for home and hotel use

Figure 8: The HD09 detector on a nightstand, suitable for home and hotel use.

8. Vedlikehold

8.1 Rengjøring

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the ventilation holes.

8.2 Batteristell

The device features a built-in 1000 mAh lithium-ion battery. For optimal battery life, charge the device when the battery indicator is low. The power-saved mode automatically turns off the screen after 30 seconds, extending battery life up to 72 hours, while CO monitoring continues in the background.

HAKINAKU HD09 showing battery capacity and power-saving features

Figure 9: Battery life and power-saving features of the HD09.

9. Feilsøking

  • Enheten slår seg ikke på: Ensure the device is fully charged. Connect to a power source using the USB-C cable.
  • Unøyaktige avlesninger: Ensure the ventilation holes are not obstructed. Avoid placing the device near strong air currents or direct heat/cold sources.
  • Alarm sounds frequently without apparent CO source: Perform a test as described in Section 5.4. If the issue persists, contact customer support.
  • Skjermen er svak: Press the 'G' button to adjust brightness.

10. Spesifikasjoner

  • Modellnummer: HD09
  • Merke: HAKINAKU
  • CO-område: 0-1000 PPM
  • Fuktighetsområde: 0 % til 95 % RF
  • Temperaturområde: -4 °F til 140 °F (-20 °C til 60 °C)
  • Batteri: 1000 mAh litiumionbatteri (oppladbart)
  • Batterilevetid: Up to 72 hours (power-saved mode)
  • Ladeport: USB-C
  • Alarmlydstyrke: 85 dB
  • Produktdimensjoner: 3.5" D x 0.66" B x 2.2" H
  • Varevekt: 2.82 unser (80 gram)
  • Materiale: ABS
  • UPC: 758321301855

11. Garanti og støtte

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official HAKINAKU webnettstedet. Ta vare på kjøpskvitteringen for garantikrav.