RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. Produktet er overview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

Figur 1.1: Overview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. Sikkerhetsinformasjon

• ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringen eller sikringsbryteren før installasjon eller service.
• Installasjonen må utføres av en kvalifisert elektriker i samsvar med alle nasjonale og lokale elektriske forskrifter.
• Sørg for at forsyningsvoltage is correct for the fixture (120-277V).
• Do not handle energized fixture with wet hands.
• Ikke installer i nærheten av brennbare materialer.
• Denne lampen er kun beregnet for innendørs bruk.

3. Oppsett og installasjon

3.1. Forhåndsinstallasjon

• Pakk ut armaturen og sjekk den for eventuelle skader.
• Ensure all necessary components are present (LED Fixture).
• Slå av strømmen ved sikringsbryteren før installasjonen starter.

3.2. Montering av armaturet

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

Figur 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. Elektriske ledninger

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

Figur 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. Bruksanvisning

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

Figur 4.1: Nærbilde view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• Velg en av følgende innstillinger: 40W, 50W, eller 60W.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• Velg en av følgende innstillinger: 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Dimmbar funksjonalitet

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. Vedlikehold

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• Rengjøring: Koble fra strømmen før rengjøring. Bruk en myk, tørr eller lett fuktet klut.amp klut til å tørke av utsiden av armaturen. Ikke bruk slipende rengjøringsmidler eller løsemidler.
• LED: Den integrerte LED-lyskilden er designet for lang levetid og krever ikke utskifting.

6. Feilsøking

Hvis armaturen ikke fungerer som forventet, se følgende vanlige problemer og løsninger:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

7. Spesifikasjoner

8. Garantiinformasjon

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting webnettstedet eller kontakt kundeservicen deres direkte. Ta vare på kjøpsbeviset for garantikrav.

9. Kundestøtte

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Webnettsted: www.rablighting.com
• Se til webnettstedet for oppdatert kontaktinformasjon, inkludert telefonnumre og e-poststøtte.