Tongtion Wireless HDMI Extender User Manual

1. Produktet er overview

The Tongtion Wireless HDMI Extender (Model H-1) provides a solution for extending HDMI video and audio signals wirelessly. It supports 1080P Full HD resolution at 60Hz and offers a transmission range of up to 1640 feet (500 meters) in line-of-sight conditions. Designed for plug-and-play operation, it eliminates the need for complex driver installations or software configurations, making it suitable for various applications including conference rooms, live events, and home theaters.

Image: The Tongtion Wireless HDMI Extender system, showing both the transmitter and receiver units with their antennas.

2. Hva er i esken

Kontroller at alle komponentene er tilstede i pakken:

• 1 x trådløs HDMI-sender
• 1 x trådløs HDMI-mottaker
• 4 x antenner
• 2 x strømadaptere
• 2 x USB-C strømkabler
• 1 x brukerveiledning
• HDMI-kabler

Image: A visual representation of the package contents, including the transmitter, receiver, antennas, power adapters, USB-C cables, and user guide.

3. Spesifikasjoner

4. Installasjonsinstruksjoner

The Tongtion Wireless HDMI Extender is designed for true plug-and-play operation, requiring no drivers or software installation.

1. Koble til antenner: Screw the four provided antennas onto the designated ports on both the Transmitter and Receiver units. Ensure they are securely fastened.
   

   Bilde: Nærbilde view of the transmitter and receiver units, highlighting the antenna connection points.

2. Slå på mottakeren: Connect one end of a USB-C power cable to the Receiver unit's USB-C port and the other end to a power adapter. Plug the power adapter into an electrical outlet. Alternatively, use a power bank or compatible NP-F series battery (not included) for portable power.
3. Connect Receiver to Display: Use an HDMI cable to connect the HDMI OUT port on the Receiver unit to the HDMI input port on your display device (e.g., TV, projector, monitor).
4. Slå på senderen: Connect the second USB-C power cable to the Transmitter unit's USB-C port and the other end to its power adapter. Plug the power adapter into an electrical outlet. Similar to the receiver, a power bank or NP-F series battery can be used.
5. Connect Transmitter to Source: Use an HDMI cable to connect the HDMI IN port on the Transmitter unit to the HDMI output port on your source device (e.g., laptop, camera, set-top box, PC, DV).
   

   Image: A diagram illustrating the connection process: transmitter connected to a laptop and receiver connected to a television.

6. Automatisk sammenkobling: The Transmitter and Receiver units are designed to pair automatically within seconds. No manual pairing or software configuration is typically required. Wait for the connection indicator lights on both units to show a stable connection.

Note: For optimal performance, ensure a clear line of sight between the transmitter and receiver, especially for longer distances. Walls and other obstructions can reduce the effective transmission range.

5. Bruksanvisning

Once the setup is complete and the units are paired, the system operates automatically.

• Strøm på: Ensure both the Transmitter and Receiver units are powered on.
• Kildeenhetsutgang: Ensure your source device (laptop, camera, etc.) is outputting video via its HDMI port.
• Skjerminngang: Set your display device (TV, projector) to the correct HDMI input channel where the Receiver is connected.
• Signaloverføring: The video and audio signal from your source device will be wirelessly transmitted to your display.
• One-Button Sync: If pairing is lost or you need to re-sync, press the sync button on both the Transmitter and Receiver units simultaneously.

Image: A visual representation of the extender in operation, showing a clear 1080P Full HD signal being transmitted wirelessly to a display.

5.1. Universal Device Compatibility

The system is compatible with a wide range of HDMI-enabled devices:

• Kildeenheter: Cameras, Laptops, Set-top boxes, Switchers, PCs, DVs.
• Visningsenheter: Projectors, TVs, Monitors.

It supports HDMI1.4/HDCP1.4, allowing for protected content streaming from various platforms.

Image: An illustration demonstrating the broad compatibility of the wireless HDMI extender with various input and output devices.

5.2. Transmission Range and Performance

The device offers a long-range 5GHz dual-antenna transmission, minimizing interference and ensuring stable signal coverage.

• Line-of-Sight (LOS) Range: Opptil 1640 fot (500 meter).
• Through-Wall Penetration: Effective range is reduced when transmitting through walls or obstructions. Typical ranges are 164-295 feet (50-90 meters) through complex home environments.
• Latens: The system is designed for low latency, suitable for video streaming and presentations. Note: Not recommended for gaming due to potential minor latency.

Image: A graphic depicting the extensive transmission range of 1640 feet and the low latency of 0.15 seconds, with a visual of the transmitter and receiver units.

Bilde: En overhead view of a house layout illustrating the signal penetration capabilities through walls and the difference between line-of-sight and obstructed transmission ranges.

6. Feilsøking

Hvis du støter på problemer, kan du se følgende vanlige feilsøkingstrinn:

• Ikke noe signal på skjermen:
  • Ensure both Transmitter and Receiver are powered on and their power indicators are lit.
  • Verify all HDMI cables are securely connected to the correct ports (HDMI IN on Transmitter, HDMI OUT on Receiver).
  • Sjekk at skjermenheten er satt til riktig HDMI-inngangskilde.
  • Ensure the source device is outputting an HDMI signal.
  • Try pressing the sync button on both units simultaneously to re-establish pairing.
  • Reduce the distance between the Transmitter and Receiver, and remove any obstructions.
• Intermittent Signal / Poor Quality:
  • Sørg for at antennene er godt festet og riktig orientert.
  • Check for strong interference sources (e.g., Wi-Fi routers, microwaves) operating on the 5GHz band nearby.
  • Move the units closer together or adjust their positions to improve line of sight.
  • Verify that the power supply is stable and sufficient for both units.
• Ingen lyd:
  • Check audio settings on your source device.
  • Ensure the display device's volume is not muted or set too low.
  • Confirm HDMI cables are fully inserted.
• Enheter som ikke pares:
  • Sørg for at begge enhetene er slått på.
  • Perform a manual sync by pressing the pairing button on both units.
  • Power cycle both the Transmitter and Receiver units.

7. Vedlikehold

To ensure the longevity and optimal performance of your Wireless HDMI Extender, follow these maintenance guidelines:

• Rengjøring: Bruk en myk, tørr klut til å rengjøre utsiden av enhetene. Ikke bruk flytende rengjøringsmidler eller aerosoler.
• Lagring: Når enhetene ikke er i bruk over lengre tid, oppbevar dem på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer.
• Håndtering: Handle the units and antennas with care to avoid physical damage. Avoid dropping or subjecting them to strong impacts.
• Ventilasjon: Ensure the units have adequate ventilation to prevent overheating, especially during prolonged operation. Do not block ventilation holes.
• Strømforsyning: Always use the provided power adapters or compatible power sources to prevent damage.

8. Garanti og støtte

The Tongtion Wireless HDMI Extender comes with a 1 års garanti fra kjøpsdatoen.

Tongtion also provides Lifetime Support for this product. If you encounter any issues or have questions that are not covered in this manual, please contact Tongtion customer support through their official channels or refer to the 24/7 troubleshooting guides mentioned in the product features.

For ytterligere hjelp, besøk Tongtion Store on Amazon.