Introduksjon
Thank you for choosing the ORDRO FL-10 Mini Camera Flash. This compact and lightweight speedlite is designed to provide additional lighting for your photography, compatible with cameras featuring a single contact hot shoe, including models from Fuji, Sony, Nikon, and Canon. This manual will guide you through the setup, operation, and maintenance of your new camera flash.
Produkt overview
Nøkkelfunksjoner
- Enkel betjening: Designed for ease of use, requiring no complex settings.
- Kompakt og lett: Dimensions of 1.8 x 1.6 x 1.2 inches and weighing only 35g, making it highly portable.
- Justerbar belysning: Offers 1/4 brightness, 1/2 brightness, and full brightness settings.
- Plug and Play: Connects upon insertion to a single contact hot shoe for immediate use.
- Universal Hot Shoe Mount: Compatible with small cameras or film/digital cameras that have a single contact hot shoe.
- Type-C-lading: Features a universally compatible Type-C interface for convenient charging.
Hva er i esken
- 1 x ORDRO FL-10 Camera Flash
Produktkomponenter
Oppsett
Charging the Flash
The ORDRO FL-10 Mini Camera Flash is equipped with a built-in Lithium Ion battery. To charge the device:
- Locate the Type-C charging port on the side of the flash unit (refer to Figure 3).
- Connect a standard USB Type-C cable to the port and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
- The charging indicator light will flash during charging and remain solid when fully charged. Charging from 0% to 100% typically takes about 60 minutes.
Montering på kamera
The FL-10 flash uses a universal hot shoe mount. Ensure your camera has a single contact hot shoe for compatibility.
- Identify the hot shoe on your camera (usually on top).
- Remove any existing hot shoe cover.
- Slide the base of the FL-10 flash into the camera's hot shoe interface until it is securely seated.
Viktig kompatibilitetsmerknad: The ORDRO FL-10 Mini Camera Flash is only compatible with cameras that have a single contact hot shoe. Please verify your camera's hot shoe type before use. For example, it is not compatible with Sony ZV-1F.
Bruksanvisning
Slå på/av
- To power on the flash, press and hold the left power button (marked with a power symbol) for 3 seconds.
- To power off the flash, press and hold the left power button for 3 seconds again.
Adjusting Flash Brightness
The FL-10 offers three adjustable brightness levels:
- 1/4 Brightness: Indicated by one green light.
- 1/2 Brightness: Indicated by two green lights.
- Full lysstyrke: Indicated by all three green lights.
To cycle through the brightness levels, short press the left power button while the flash is on.
Test Flash
To manually test the flash, press the right button (marked with a lightning bolt symbol). This will trigger a flash at the currently selected brightness level.
Video demonstrasjon
Video 1: This video demonstrates the ORDRO FL-10 Camera Flash, showing its compact size, how to power it on/off, adjust flash power, and mount it onto a camera. It also includes a comparison of photos taken with and without flash at different power settings.
Vedlikehold
- Keep the flash unit clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- Avoid dropping the device or exposing it to strong impacts.
- Oppbevar blitsen på et kjølig og tørt sted når den ikke er i bruk.
- Ikke forsøk å demontere eller reparere enheten selv, da dette vil ugyldiggjøre garantien.
Feilsøking
Flash Not Firing
- Sjekk strøm: Ensure the flash is powered on and fully charged. The indicator lights should be green.
- Hot Shoe Connection: Verify that the flash is securely mounted on the camera's hot shoe. A loose connection can prevent firing.
- Kamerakompatibilitet: Confirm your camera has a single contact hot shoe. The FL-10 is not compatible with multi-contact hot shoes (e.g., some Sony models like ZV-1F).
- Kamerainnstillinger: Ensure your camera's flash settings are enabled and configured correctly to trigger an external flash.
Flash Not Bright Enough
- Juster lysstyrke: Cycle through the brightness levels (1/4, 1/2, Full) by short pressing the power button to increase output.
- Distance to Subject: The effective range of the flash depends on its power setting. Ensure your subject is within the flash's optimal range.
Spesifikasjoner
| Modellnummer | FL-10 |
| Produktdimensjoner | 1.8 x 1.6 x 1.2 tommer |
| Varevekt | 1.23 unser (ca. 35 g) |
| Batteritype | 1 litiumionbatteri (inkludert) |
| Batterilevetid | Up to 2.5 Hours (continuous use, varies with power setting) |
| Ladeport | USB Type-C |
| Kamerablitstype | Hotshoe (Single Contact) |
| Flash-synkroniseringshastighet | 1/250 (typical) |
| Kompatible monteringer | Fuji, Sony, Nikon, Canon (with single contact hot shoe) |
Garanti og støtte
ORDRO products are designed and manufactured to the highest quality standards. For warranty information and customer support, please refer to the documentation included with your purchase or visit the official ORDRO webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis for garantikrav.