ACEZUK M06 6000A Car Jump Starter with 150PSI Air Compressor User Manual

1. Produktet er overview

Nøkkelfunksjoner

• 6000A Jump Starter: Capable of reliably jump-starting 12V vehicles (all gasoline engines and up to 12.0L diesel engines) in seconds, even in temperatures ranging from -20°C to 60°C. Provides up to 70 jump starts on a single charge. Suitable for automobiles, trucks, motorcycles, boats, lawnmowers, yachts, pickups, and snowmobiles.
• 150PSI Portable Air Compressor: Designed for rapid inflation of all tires from 0 PSI to 150 PSI. Features dual-cylinder technology for a fast inflation rate of 50 LPM (1.76 CFM).
• Digital Pressure Gauge & Automatic Shut-off: Equipped with a real-time LED digital pressure gauge for accurate readings. Allows selection of preset modes (car, bicycle, motorcycle, ball) and automatically stops inflation once the desired PSI is reached.
• 21800mAh strømbank: Functions as a power bank with Type-C input (5V/3A, 9V/2A) and dual USB outputs (5V/3A) to charge personal devices like cell phones and tablets. Recommended charging the jump starter with a 5V/2A adapter or higher.
• Praktisk design: Features a unique 3.4-inch large LCD screen displaying operational status, battery level, and potential errors. Includes a 600 lumens LED light with 3 modes (constant light, strobe, SOS) for outdoor activities or emergencies. An additional small light is integrated for illuminating the inflation operation area.
• Smart Jump Cables: Provides 8 types of protection, including protection against overheating, overcharge, over-discharge, over-voltage, short-circuit, reverse polarity, and anti-interference.

Pakkeinnhold

• 1 x ACEZUK M06 Jump Starter with Air Compressor
• 1 x Smart Jump Cable
• 1 x Air Pump Hose
• 4 x gassdyser
• 1 x USB-C ladekabel
• 1 x brukerhåndbok
• 1 x Portable EVA Carrying Case

2. Sikkerhetsinformasjon

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Do not operate the air pump continuously for extended periods. If the tire compressor becomes hot, allow it to cool down for several minutes before resuming inflation.
• Avoid over-inflating tires, as this can cause damage. If a tire is over-inflated, gently press the tire valve to release excess air.
• Always ensure correct polarity when connecting the jump cables to the vehicle battery terminals. Incorrect connection can cause sparks, damage the device, or harm the user.
• Oppbevar enheten og dens tilbehør utilgjengelig for barn.
• Do not attempt to disassemble, modify, or repair the device. This will void the warranty and may lead to hazards.
• Store the device in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
• Use only the provided smart jump cables and accessories with this device.

3. Oppsett

Lader enheten

Before initial use, fully charge the ACEZUK M06. It is recommended to charge the device every 3-4 months to maintain optimal battery health, especially if not in regular use.

1. Connect the provided USB-C charging cable to the device's Type-C input port.
2. Connect the other end of the USB-C cable to a 5V/2A or higher USB power adapter (not included).
3. The LCD screen will display the charging status and battery level. Charge until the battery indicator shows 100%.

Innledende inspeksjon

Upon receiving your ACEZUK M06, perform a quick inspection:

• Check the device and all accessories for any visible damage.
• Ensure all components listed in the 'Package Contents' section are present.

4. Bruksanvisning

4.1 Hoppstart av et kjøretøy

Følg disse trinnene for å starte kjøretøyet på en trygg måte:

1. Sørg for at tenningen er av og at parkeringsbremsen er aktivert.
2. Insert the smart jump cable plug completely into the jump starter's designated port. The red and green lights on the clamp will flash alternately, indicating it's ready.
3. Koble til den røde clamp til den positive (+) polen på bilbatteriet.
4. Koble til den svarte clamp til den negative (-) polen på kjøretøyets batteri.
5. If the indicator light on the smart cable flashes red and green alternately, and the vehicle does not start, press and hold the forced start button on the smart cable for 3 seconds until the light turns solid green. This bypasses safety checks for severely discharged batteries.
6. Start the vehicle's engine within 30 seconds of the indicator light turning solid green.
7. Når kjøretøyet starter, fjern umiddelbart dekselet.amps from the battery terminals within 30 seconds. First, remove the black clamp, then the red clamp.

4.2 Bruk av luftkompressoren

To inflate tires or other inflatables:

1. Trykk på PÅ/AV-knappen for å slå på enheten.
2. Briefly press the air pump button (usually indicated by a tire icon) to enter inflation mode. The screen will display the current pressure.
3. Press the 'M' (Mode) button to cycle through and select the appropriate inflation mode (e.g., car, bicycle, motorcycle, ball).
4. Use the '+' and '-' buttons to adjust the desired target air pressure. You can also change the unit of measurement (PSI, BAR, KPA) if available.
5. Connect the air pump hose securely to the tire valve or the appropriate gas nozzle for other inflatables.
6. Press and hold the air pump button for 3 seconds to begin inflation.
7. Kompressoren stopper automatisk når det forhåndsinnstilte trykket er nådd.
8. Briefly press the air pump button again to exit inflation mode.

4.3 Bruk som powerbank

The ACEZUK M06 can charge your electronic devices:

1. Connect your mobile phone, tablet, or other USB-powered device to one of the dual USB output ports (5V/3A) on the jump starter.
2. The device will automatically begin charging your connected device.

4.4 Bruke LED-lyset

The integrated LED light provides illumination for various situations:

1. Press the light button (usually indicated by a light bulb icon) to turn on the LED light.
2. Press the button repeatedly to cycle through the 3 modes: constant light, strobe, and SOS signal.
3. An additional small light is located on the bottom of the product to specifically illuminate the area around the tire valve during inflation.

5. Vedlikehold

Proper maintenance ensures the longevity and optimal performance of your ACEZUK M06:

• Lagring: Store the device in its portable EVA carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Lading: If the device is not used regularly, recharge it every 3-4 months to prevent deep discharge and maintain battery health.
• Rengjøring: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure all ports are free from dust and debris.
• Kabelpleie: Inspect the smart jump cables and air pump hose regularly for any signs of wear or damage. Replace if necessary.

6. Feilsøking

If you encounter issues with your ACEZUK M06, refer to the table below for common problems and their solutions:

7. Spesifikasjoner

• Merke: ACEZUK
• Modell: M06
• Toppstrøm: 6000 Amperes
• Batterikapasitet: 21800 mAh (litiumion)
• Type kjøretøyservice: Automotive (All Gas, up to 12.0L Diesel)
• Voltage: 12 volt
• Air Compressor Pressure: 0-150 PSI
• Luftstrøm: 50 LPM (1.76 CFM)
• Type-C-inngang: 5V/3A, 9V/2A
• USB-utganger: Dual 5V/3A
• LED lys: 600 Lumens (3 modes: Light/Strobe/SOS)
• Driftstemperatur: -20°C til 60°C
• Produktvekt: 1.57 kg
• Pakkedimensjoner: 21.1 x 17.3 x 14.4 cm

8. Garanti og støtte

ACEZUK is committed to providing high-quality products and excellent customer service.

• Garanti: This product comes with a 2-year FREE warranty from the date of purchase.
• Teknisk støtte: Lifetime technical support is available for all ACEZUK M06 users.
• Kundeservice: Our customer service team is available 24/7 to assist you with any questions or concerns.

For warranty claims, technical assistance, or general inquiries, please refer to the contact information provided with your purchase or visit the official ACEZUK webnettsted for støtteressurser.