Topaz RTL4-SQ-7W-CS-WH 4-inch Performance LED Recessed Retrofit Downlight Instruction Manual

1. Viktig sikkerhetsinformasjon

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringen eller kretsbryteren før installasjon eller service.
• ADVARSEL: Risk of fire. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
• Dette produktet må installeres i samsvar med gjeldende installasjonskode av en person som er kjent med konstruksjonen og driften av produktet og farene involvert.
• Egnet for våte steder.
• Ikke lag eller endre noen åpne hull i et kabinett med ledninger eller elektriske komponenter under installasjonen av settet.
• For å forhindre skade på ledninger eller slitasje, ikke utsett ledninger for kanter på metallplater eller andre skarpe gjenstander.

2. Produktet er overview

The Topaz RTL4-SQ-7W-CS-WH is a 4-inch square LED recessed retrofit downlight designed for both new construction and existing recessed housings. It features a CCT (Correlated Color Temperature) selectable switch, allowing users to choose from five color temperature options. This 7-watt LED fixture provides 90 CRI quality lighting and is dimmable.

Nøkkelfunksjoner:

• Retrofit trim for 4-inch recessed housings.
• CCT field selectable switch to adjust between 5 color temperatures (2700K, 3000K, 3500K, 4000K, 5000K).
• Square baffle trim with a durable white finish.
• Dimmable LED functionality.
• High Color Rendering Index (CRI) of 90.
• Egnet for våte steder.

3. Pakkens innhold

Kontroller at alle komponenter er til stede før installasjonen starter:

• 1 x Topaz RTL4-SQ-7W-CS-WH LED Recessed Downlight
• 1 x E26-adapter
• Hurtigkoblinger

Image 1: The Topaz 4-inch square LED downlight shown with its included E26 adapter, ready for installation.

4. Oppsett og installasjon

4.1 Forhåndsinstallasjon

Before starting, ensure you have the following tools and materials:

• Skrujern
• Trådstrippere (hvis nødvendig)
• Vernebriller
• Hansker
• Existing 4-inch recessed housing

4.2 Installasjonstrinn

1. Slå av strømmen: Locate the circuit breaker or fuse box and turn off the power supply to the recessed lighting fixture you are replacing or installing. Verify power is off using a voltage tester.
2. Remove Existing Trim (if applicable): Fjern forsiktig den eksisterende pæren og listverket fra det innfelte huset.
3. Koble til E26-adapteren: Screw the E26 adapter into the existing E26 socket within the recessed housing.
4. Connect Quick Connects: Plug the quick connect cable from the LED downlight into the quick connect cable from the E26 adapter. Ensure a secure connection.
5. Select CCT (Color Temperature): Before inserting the downlight into the housing, locate the CCT selectable switch on the back of the fixture. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.


Image 2: The back of the Topaz LED downlight showing the CCT selection switch and the connected E26 adapter. The friction clips are also visible.

6. Sett inn downlight: Gently push the LED downlight into the 4-inch recessed housing. The friction clips on the sides of the downlight will secure it in place. Ensure the trim is flush with the ceiling.
7. Gjenopprett kraften: Slå på strømmen igjen ved sikringsskapet eller strømbryteren.
8. Test: Slå på lysbryteren for å bekrefte at den fungerer som den skal.

5. Bruksanvisning

5.1 CCT Color Selection

The Topaz RTL4-SQ-7W-CS-WH features a CCT selectable switch located on the back of the fixture. This switch allows you to choose from five different color temperatures to suit your preference or application:

• 2700K: Warm White (similar to incandescent)
• 3000K: Myk hvit
• 3500K: Nøytral Hvit
• 4000K: Kjølig hvit
• 5000K: Dagslys

To change the CCT, you must first remove the fixture from the recessed housing and then slide the switch to the desired setting. Reinstall the fixture after selection.

Bilde 3: Et nærbilde view of the CCT selection switch on the back of the downlight, showing the five selectable color temperature options.

5.2 Dimmingsfunksjonalitet

This LED downlight is dimmable. For optimal performance, use with compatible LED-rated dimmers. Refer to your dimmer's instructions for proper installation and operation. Ensure the dimmer is suitable for LED loads.

6. Vedlikehold

The Topaz RTL4-SQ-7W-CS-WH LED downlight requires minimal maintenance.

• Rengjøring: Sørg for at strømmen er slått av før rengjøring. Tørk av armaturen med en myk, tørr eller lett fuktet klut.amp klut. Ikke bruk sterke kjemikalier, slipende rengjøringsmidler eller løsemidler, da disse kan skade overflaten eller de elektriske komponentene.
• Ingen deler som kan repareres av brukeren: There are no user-serviceable parts inside this fixture. Do not attempt to disassemble the unit.

7. Feilsøking

If the fixture does not operate correctly, refer to the following troubleshooting guide:

Hvis problemet vedvarer etter at du har forsøkt disse løsningene, kontakt en kvalifisert elektriker eller produsentens kundestøtte.

8. Spesifikasjoner

9. Garanti og støtte

This product is manufactured by Topaz and is subject to their standard warranty terms and conditions. Please refer to the official Topaz website or contact their customer service for detailed warranty information.

For technical assistance, troubleshooting, or warranty claims, please contact Topaz customer support directly. Contact information can typically be found on the manufacturer's webnettsted eller produktemballasje.