Introduksjon
The EPOMAKER Cypher 96 is a versatile 96% layout wireless mechanical keyboard designed for both gaming and office use. It features an 8000mAh battery, hot-swappable switches, RGB backlighting, and a unique numpad that doubles as a calculator. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.
Figure 1: EPOMAKER Cypher 96 Wireless Mechanical Keyboard
Hva er i esken
Bekreft at alle varene er til stede i pakken din:
- EPOMAKER Cypher 96 Wireless Mechanical Keyboard
- Avtakbar USB-C-kabel
- Keycap puller
- Brukerhåndbok
Figur 2: Pakkeinnhold
Video 1: EPOMAKER Cypher96 Unboxing Video. This video demonstrates the unboxing process and shows the included items.
Oppsett
1. Lade tastaturet
The Cypher 96 is equipped with an 8000mAh battery. Connect the detachable USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a wall adapter. The keyboard will begin charging automatically. A battery indicator on the keyboard's display will show the charging status.
Figure 3: Keyboard Charging
2. Tilkoblingsmoduser
The Cypher 96 supports three connectivity modes: USB-C Wired, 2.4Ghz Wireless, and Bluetooth 5.0. Use the switch located on the side of the keyboard to select your desired mode.
- USB-C kablet: Koble tastaturet direkte til enheten din med den medfølgende USB-C-kabelen.
- 2.4 GHz trådløst: Plug the 2.4Ghz dongle (located under the left keyboard stand) into your device. Switch the keyboard to 2.4Ghz mode.
- Bluetooth 5.0: The keyboard can connect to up to three devices simultaneously. Switch to Bluetooth mode and pair with your devices.
Figure 4: Tri-Mode Connectivity
3. Bytte av operativsystemmodus
To switch between Mac and Windows operating system modes, use the following key combinations:
- FN + Q: Mac-modus
- FN + W: Windows-modus
4. Brytere som kan byttes under drift
The Cypher 96 features hot-swappable sockets, allowing you to change mechanical switches without soldering. It supports both 3-pin and 5-pin mechanical switches.
Figure 5: Hot-Swappable Switches
Bruksanvisning
1. Numpad and Calculator Function
The integrated numpad can function as a standard numeric keypad or transform into a calculator with a dedicated display.
- Activate Calculator: Pressen FN + NUM to switch the numpad to calculator mode.
- Mute Buzzer: The calculator has a built-in buzzer for keypress confirmation. Press FN + M to mute or unmute the buzzer.
Figure 6: Numpad in Calculator Mode
Video 2: EPOMAKER Cypher96 Demonstration Video of Calculator Use. This video shows how to use the numpad as a calculator.
2. NKRO (N-Key Rollover)
The Cypher 96 supports N-key rollover, meaning every keypress is registered accurately, even when multiple keys are pressed simultaneously. This feature is crucial for fast typing and gaming.
3. RGB-bakgrunnsbelysning
The keyboard features south-facing RGB LEDs with 16 preset lighting effects. You can customize lighting effects and other settings using the EPOMAKER driver software.
4. Programmerbar programvare
Download the official EPOMAKER driver software to unlock full customization options for your Cypher 96 keyboard. This software allows you to:
- Tilordne nøkler på nytt
- Opprett makroer
- Adjust RGB lighting effects
- Configure other advanced settings
Figur 7: Programmerbart programvaregrensesnitt
Video 3: EPOMAKER Cypher 96 Typing Video. This video demonstrates the typing sound and feel of the keyboard.
Vedlikehold
1. Rengjøring av tastaturet
To clean your keyboard, first disconnect it from all power sources. Use a soft, lint-free cloth dampened with a small amount of water or a mild cleaning solution. For deeper cleaning, you can remove keycaps using the provided keycap puller and clean the switches and plate with compressed air or a brush.
2. Replacing Switches and Keycaps
Due to the hot-swappable design, you can easily replace switches and keycaps. Use the included keycap puller to gently remove keycaps. Then, use the switch puller to carefully extract switches. Align new switches with the sockets and press firmly until they click into place. Replace keycaps by pressing them onto the switch stems.
Figure 8: Replacing Switches
Feilsøking
- Tastaturet svarer ikke: Ensure the keyboard is charged and properly connected (wired, 2.4Ghz dongle, or Bluetooth paired). Try switching between connectivity modes.
- Calculator time incorrect: If the calculator display shows an incorrect time, refer to the EPOMAKER software or support resources for instructions on how to synchronize or set the time.
- Nøkler registreres ikke: For hot-swappable keyboards, ensure switches are fully seated in their sockets. If a specific switch is faulty, it can be replaced.
- Problemer med Bluetooth-tilkobling: Ensure the keyboard is in Bluetooth pairing mode and your device's Bluetooth is enabled. Try removing and re-pairing the device.
Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Merke | EPOMAKER |
| Modellnummer | Cypher 96 |
| Oppsett | 96% with Numpad and Calculator |
| Tilkobling | 2.4G Wireless, Bluetooth (BT 5.0), USB-C Wired |
| Batterikapasitet | 8000mAh |
| Brytere | Hot-Swappable (3/5-pin), Wisteria Linear Switch (variant) |
| Bakgrunnsbelysning | RGB, sørvendte LED-pærer |
| Spesielle funksjoner | NKRO, Hotkeys and Media Keys, Programmable Keys, Gasket-Mount |
| Materiale | Plast |
| Kompatible enheter | Spillkonsoll, bærbar PC, PC, smarttelefon, nettbrett |
Garanti og støtte
Garantiinformasjon
The EPOMAKER Cypher 96 Wireless Mechanical Keyboard comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
Kundestøtte
For technical assistance, troubleshooting, or warranty inquiries, please contact EPOMAKER customer support through their official webnettstedet eller kontaktinformasjonen som følger med produktet ditt. Du kan også besøke EPOMAKER-butikken på Amazon for ytterligere ressurser.