1. Sikkerhetsinformasjon
Vennligst les og forstå alle instruksjonene før montering og bruk. Ta vare på denne håndboken for senere referanse.
- Vekt kapasitet: Do not overload or stand on the stool. The maximum weight capacity is 300 lb (136 kg) per stool. Exceeding this limit may cause damage or injury.
- Stabil overflate: Always place the bar stools on a flat, stable, and level surface to prevent tipping.
- Regelmessig inspeksjon: Sjekk regelmessig alle bolter og koblinger for å sikre at de er stramme. Stram til etter behov.
- Barns sikkerhet: Keep children away from the assembly area. Do not allow children to climb or play on the stools.
- Utendørs bruk: While designed for outdoor use, prolonged exposure to extreme weather conditions (heavy rain, strong winds, direct intense sunlight) may reduce product lifespan. Consider using a protective cover when not in use.
- Moving Stools: Lift the stools when moving them; do not drag to avoid damage to the legs or floor.
2. Pakkens innhold
Ensure all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
| Del | Beskrivelse | Quantity (per stool) |
|---|---|---|
| A | Backrest/Seat Frame | 1 |
| B | Setebase | 1 |
| C | Footrest Bar | 1 |
| D | Sideramme | 1 |
| E | Setepute | 1 |
| F | Korsryggpute | 1 |
| 1 | Skruer (M6*25) | 4 |
| 2 | Skruer (M6*35) | 4 |
| 3 | Allennøkkel | 1 |
Note: Quantities listed are per individual stool. For a set of 4, multiply quantities by 4.
3. Monteringsinstruksjoner
Follow these steps carefully to assemble your Yaheetech Patio Bar Stools. It is recommended to assemble on a soft, clean surface to prevent scratches.
Monteringsvideoguide
Official assembly video for Yaheetech Set of 2 Patio Bar Stools. The assembly process is identical for the Set of 4.
- Step 1: Attach Backrest/Seat Frame (A) to Seat Base (B).
Align the holes on Part A with the corresponding holes on Part B. Secure them using four M6*25 screws (Part 1) and the Allen wrench (Part 3). Ikke stram skruene helt enda.
- Step 2: Attach Side Frame (D).
Connect the Side Frame (Part D) to the assembled Parts A and B. Use four M6*35 screws (Part 2) and the Allen wrench (Part 3) to secure these connections. Again, do not fully tighten the screws.
- Step 3: Attach Footrest Bar (C).
Insert the Footrest Bar (Part C) into the designated slots on the chair legs. Secure it with the remaining M6*35 screws (Part 2) and the Allen wrench (Part 3). Once all screws are in place for the entire stool, gradually tighten all screws evenly until secure. Do not overtighten.
- Step 4: Add Cushions and Pillows.
Place the Seat Cushion (Part E) onto the seat of the assembled stool. Use the attached ties to secure it to the chair frame. Position the Lumbar Pillow (Part F) against the backrest for added comfort.
Image of a hand pressing down on the soft seat cushion, demonstrating its comfort.
Image of the striped lumbar pillow placed on the stool's backrest.
4. Bruksanvisning
- Riktig sitteplasser: Sit centrally on the stool with both feet on the footrest for optimal balance and comfort.
- Justerbare fotputer: The stools are equipped with adjustable foot pads. Rotate these pads to stabilize the stool on uneven surfaces and prevent scratching floors.
- Utendørs plassering: These bar stools are suitable for various outdoor settings such as patios, backyards, decks, and porches.
Detail of the adjustable foot pad for stability on uneven ground.
5. Vedlikehold
- Cleaning Rattan: Wipe the PE rattan and iron frame with a soft, damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly. Dry completely to prevent rust on metal parts.
- Putepleie: The seat and back cushions feature removable, washable covers. Hand wash or machine wash on a gentle cycle with cold water. Air dry only; do not tumble dry.
- Vinterlagring: During off-seasons or harsh weather, store the stools in a dry, protected area or use a weather-resistant furniture cover to prolong their lifespan.
- Festekontroll: Periodically inspect all screws and bolts. Tighten any loose fasteners to maintain structural integrity.
6. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Stool is wobbly. | Ujevn overflate; løse fester. | Adjust the foot pads on the bottom of the legs. Check and tighten all assembly screws. Ensure the stool is on a flat surface. |
| Putene glir av setet. | Cushion ties not secured. | Ensure the ties on the seat cushion are securely fastened to the chair frame. |
| Vanskeligheter med å montere deler. | Screws overtightened prematurely; misaligned parts. | Loosen all screws, realign parts, then gradually tighten all screws evenly. Refer to the assembly video for visual guidance. |
7. Spesifikasjoner
| Merke | Yaheetech |
| Modellnummer | YT-00145053 |
| Produktmål (per krakk) | 43.5 cm B x 20.5 cm D x 17.5 cm H |
| Sete dimensjoner | 17" B x 17" D |
| Setehøyde (med pute) | 31" |
| Fotstøttehøyde | 10.4" |
| Tykkelse på seteputen | 3.4" |
| Farge | Brun/Beige |
| Rammemateriale | Pulverlakkert jern |
| Woven Material | PE Rattan |
| Putemateriale | Polyester, skum |
| Maximum Weight Capacity (per stool) | 300 lb (136 kg) |
| Vekt (per krakk) | Omtrent 25 lbs |
| Montering påkrevd | Ja |
Detailed product dimensions for the bar stool.
8. Garanti og støtte
Yaheetech products are designed for quality and durability. For specific warranty information, please refer to the product packaging or contact Yaheetech customer service directly.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please reach out to our customer support team. Contact details can typically be found on our official webnettstedet eller gjennom kjøpsplattformen din.