Dapper Supply DP-WPFS1204

User Manual: Dapper Supply Battery Powered Walk Behind Mini Automatic Floor Scrubber Machine

Model: DP-WPFS1204

1. Introduksjon

Welcome to the Dapper Supply family! This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new Battery Powered Walk Behind Mini Automatic Floor Scrubber Machine. Please read this manual thoroughly before operating the machine to ensure optimal performance and longevity.

2. Sikkerhetsinformasjon

Din og andres sikkerhet er avgjørende. Følg alltid følgende sikkerhetsretningslinjer:

  • Les alle instruksjonene før du bruker apparatet.
  • Do not operate the machine with wet hands or in wet conditions unless specifically designed for it.
  • Hold barn og kjæledyr unna maskinen under drift.
  • Use only Dapper Supply approved accessories and replacement parts.
  • Ensure the machine is unplugged before performing any maintenance or cleaning.
  • This machine is designed for tile, vinyl, hardwood, laminate, concrete, and other sealed hard floors. It is not intended for use on carpets or rugs.
  • Do not use flammable or combustible liquids with the machine.
  • Oppbevar maskinen på et tørt og sikkert sted når den ikke er i bruk.

3. Produktet er overview

3.1 Komponenter

The Dapper Supply Mini Automatic Floor Scrubber comes with the following components:

  • Main Scrubber Unit
  • Justerbart håndtak
  • Solution Tank (1.2-gallon capacity)
  • Recovery Tank (1.5-gallon capacity)
  • Lader og strømledning
  • Set of White Scouring Pads (included)
  • Scrubbing Brushes (optional/additional purchase)
  • Polishing Pads (optional/additional purchase)
Dapper Supply Mini Automatic Floor Scrubber with all included accessories
Figure 3.1: Main Scrubber Unit with Charger, Brushes, and Pads.
Side view of the Dapper Supply Mini Automatic Floor Scrubber
Figur 3.2: Side view of the assembled floor scrubber.
Dapper Supply Mini Automatic Floor Scrubber with recovery tank removed
Figure 3.3: Recovery tank detached from the main unit.
Topp view of the Dapper Supply Mini Automatic Floor Scrubber with solution tank lid open
Figure 3.4: Solution tank access on top of the unit.
Close-up of the Dapper Supply Mini Automatic Floor Scrubber's recovery tank
Figure 3.5: The removable recovery tank.
Close-up of the Dapper Supply Mini Automatic Floor Scrubber's handle and control panel
Figure 3.6: Handle and control interface.
Underside view of the Dapper Supply Mini Automatic Floor Scrubber showing the scrubbing brushes
Figure 3.7: Underside with scrubbing brushes installed.
Underside view of the Dapper Supply Mini Automatic Floor Scrubber showing the polishing pads
Figure 3.8: Underside with polishing pads installed.
Compact side profile of the Dapper Supply Mini Automatic Floor Scrubber
Figure 3.9: Compact design for easy maneuverability.

3.2 Nøkkelfunksjoner

  • Compact & Efficient Cleaning: 15-inch cleaning width and 170 RPM brush speed.
  • Høy produktivitet: Covers up to 12,900 ft² per hour.
  • Langvarig ytelse: Powerful 24V system with up to 90 minutes runtime and 100-minute charge time.
  • Doble tanker: 1.2-gallon solution tank and 1.5-gallon recovery tank for efficient water management.
  • Stille drift: Operates at just 65 dB, suitable for daytime cleaning.
  • Superior Drying Performance: 17-inch squeegee and 70W suction motor ensure quick water recovery.
  • Lightweight & Easy to Maneuver: Weighs 22 lbs, easy to transport and operate in tight spaces.
  • Versatile Floor Compatibility: Designed for tile, vinyl, hardwood, laminate, concrete, and other sealed hard floors.

4. Oppsett

4.1 Utpakking

Fjern alle komponenter forsiktig fra emballasjen. Inspiser for eventuelle skader under transport. Ta vare på emballasjen for senere oppbevaring eller transport.

4.2 Montering

  1. Attach the adjustable handle to the main scrubber unit, ensuring it clicks securely into place.
  2. Open the brush/pad compartment on the underside of the machine.
  3. Install the desired scrubbing brushes or polishing pads by aligning them with the mounting points and securing them. (Refer to Figure 3.7 for brushes and Figure 3.8 for pads).
  4. Ensure the recovery tank is properly seated in its compartment. (Refer to Figure 3.3).

4.3 Innledende lading

Before first use, fully charge the machine's battery. The powerful 24V system requires approximately 100 minutes for a full charge.

  1. Locate the charging port on the machine.
  2. Connect the charger to the machine and then plug the power cord into a standard electrical outlet.
  3. The charging indicator will show the charging status. Disconnect once fully charged.

Video 4.1: Official product video demonstrating features including charging and operation. This video is provided by Dapper Supply.

5. Bruksanvisning

5.1 Fylle opp løsningstanken

  1. Sørg for at maskinen er slått av.
  2. Open the lid of the solution tank located on the top of the unit. (Refer to Figure 3.4).
  3. Fill the tank with clean water and an appropriate, low-foaming floor cleaning solution. Do not overfill.
  4. Securely close the solution tank lid.

5.2 Starte maskinen

  1. Sørg for at maskinen står på en flat og stabil overflate.
  2. Press and hold the power button on the handle for approximately 3 seconds until the machine powers on.
  3. Adjust the handle to a comfortable operating height.

5.3 Rengjøringsprosess

The machine is designed for efficient cleaning of hard floor surfaces.

  • Gently push the machine forward to begin scrubbing. The solution will be dispensed, and the brushes/pads will rotate to clean the floor.
  • The 17-inch squeegee and 70W suction motor will recover the dirty water into the recovery tank, leaving floors dry and safe to walk on.
  • Move the machine in overlapping passes to ensure complete coverage.
  • The machine can cover up to 12,900 ft² per hour, making it ideal for small commercial spaces.

5.4 Emptying the Recovery Tank

It is crucial to empty the recovery tank after each use or when it reaches its maximum capacity (1.5 gallons).

  1. Slå av maskinen.
  2. Remove the recovery tank from the main unit. (Refer to Figure 3.3 and Figure 3.5).
  3. Carefully pour the dirty water into a suitable drain.
  4. Rinse the recovery tank with clean water to prevent residue buildup.
  5. Reinstall the clean recovery tank securely.

6. Vedlikehold

6.1 Daglig vedlikehold

  • After each use, empty and rinse both the solution and recovery tanks thoroughly.
  • Clean the squeegee blade to ensure effective water pickup. Inspect for wear and tear.
  • Tørk av utsiden av maskinen med adamp klut.

6.2 Brush/Pad Replacement

Regularly inspect the scrubbing brushes or polishing pads for wear. Replace them when they show signs of reduced effectiveness.

  1. Turn off the machine and tilt it back to access the underside.
  2. Remove the worn brushes/pads by twisting or unlatching them. (Refer to Figure 3.7 and Figure 3.8).
  3. Install new brushes/pads, ensuring they are securely fastened.

6.3 Oppbevaring

When storing the machine for extended periods:

  • Ensure both tanks are empty and clean.
  • Store the machine in a dry, temperature-controlled environment.
  • For optimal battery life, charge the battery fully before storage and recharge every 3-6 months if not in use.

7. Feilsøking

Se tabellen nedenfor for vanlige problemer og løsningene på dem.

ProblemMulig årsakLøsning
Maskinen slår seg ikke på.Batteriet er lavt eller utladet.
Av/på-knappen holdes ikke inne lenge nok.
Lad batteriet helt.
Trykk og hold inne strømknappen i 3 sekunder.
Poor water pickup (squeegee not working).Oppsamlingstanken er full.
Squeegee blade is dirty or worn.
Problem med sugemotor.
Tøm og rengjør oppsamlingstanken.
Clean or replace the squeegee blade.
Contact customer support if suction motor is faulty.
Brushes/Pads not rotating.Brushes/pads not installed correctly.
Obstruction in brush area.
Reinstall brushes/pads securely.
Se etter og fjern eventuelt rusk.
Machine leaves streaks.Dirty solution tank.
Incorrect cleaning solution concentration.
Squeegee blade issue.
Clean the solution tank.
Adjust solution concentration as per manufacturer's guidelines.
Clean or replace squeegee blade.

8. Spesifikasjoner

Technical specifications for the Dapper Supply Mini Automatic Floor Scrubber:

TrekkSpesifikasjon
Produktdimensjoner17 x 17 x 44 tommer
Vekt22 pund
ModellnummerDP-WPFS1204
Batteritype1 x 12V batteri (inkludert)
KjøretidOpptil 90 minutter
LadetidOmtrent 100 minutter
Rengjøringsbredde15 tommer
Børstehastighet170 RPM
Kapasitet for løsningstank1.2 liter
Kapasitet for utvinningstank1.5 liter
Støynivå65 dB
Squeegee Bredde17 tommer
Sugemotorkraft70W
ProdusentDapper Supply
OpprinnelseslandKina

9. Garanti og støtte

9.1 Produktgaranti

The Dapper Supply Mini Automatic Floor Scrubber is backed by a full 1-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2 Kundestøtte

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Dapper Supply customer support: