Tyger Auto Tyger Access Running Boards Instruction Manual

1. Produktet er overview

The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.

This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.

Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.

2. Passforminformasjon

These running boards are specifically designed for:

• Kjøretøy: 2024-2026 Toyota Tacoma
• Førerhustype: Double Cab (4 full-size doors)
• Kompatibilitet: Includes Hybrid models

Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.

Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.

3. Oppsett og installasjon

3.1. Inkluderte komponenter

Før du starter installasjonen, må du kontrollere at alle komponentene er til stede:

• Løpebrett på førersiden
• Løpebrett på passasjersiden
• All necessary hardware and mounting brackets
• Installasjonsveiledning (dette dokumentet)

3.2. Installasjonstrinn

Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.

1. Klargjør kjøretøy: Parker kjøretøyet på et jevnt underlag og sett på parkeringsbremsen.
2. Identifiser monteringspunkter: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
3. Fest braketter: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
4. Plassering av stigbrett: Carefully lift and align the running board with the attached brackets.
5. Secure Running Board: Attach the running board to the brackets using the remaining hardware.
6. Juster og stram: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
7. Gjenta for den andre siden: Follow the same steps for the opposite side of the vehicle.

Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.

4. Bruksanvisning

The Tyger Access Running Boards are designed for straightforward use. To operate:

• Ensure the running boards are securely installed before use.
• When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
• The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.

Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.

5. Vedlikehold

To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:

• Regelmessig rengjøring: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
• Undersøkelse: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
• Beskyttelse mot overflatebehandling: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.

Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.

6. Feilsøking

If you encounter any issues with your running boards, consider the following:

• Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
• Uvanlige lyder: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
• Vanskeligheter med å installere: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).

For vedvarende problemer som ikke er løst med disse trinnene, vennligst kontakt kundestøtte.

7. Spesifikasjoner

Image 7.1: Detailed dimensions of the Tyger Access Running Board.

Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.

8. Garantiinformasjon

Tyger Auto provides a 5 års garanti for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.

9. Støtte

For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto website or contact their customer service department through the retailer where the product was purchased.

Du finner mer informasjon og kontaktinformasjon på Tyger Auto Store on Amazon.