voijump K206 Professional UHF Wireless Dual Handheld Microphone System

Introduksjon

Thank you for choosing the voijump K206 Professional UHF Wireless Dual Handheld Microphone System. This system is designed to provide clear, high-quality audio for various applications such as karaoke, parties, church events, speeches, and DJ performances. Please read this manual carefully to ensure proper setup and operation.

Pakkeinnhold

The voijump K206 system includes the following components:

• 2 x Wireless Microphones (Red & Gray)
• 1 x 6.35 mm mottaker
• 1 x 3.5 mm adapter
• 1 x USB-C ladekabel
• 4 x AA batterier
• 2 x sklisikre ringer
• 1 x brukerhåndbok

Image: All components included in the voijump K206 Wireless Microphone System package.

Oppsettinstruksjoner

1. Lad opp mottakeren: Connect the rechargeable receiver to a power source using the provided USB-C charging cable. The receiver takes approximately 2.5 hours for a full charge and provides about 4.5 hours of working time.
2. Sett inn mikrofonbatterier: Each wireless microphone requires 2 AA alkaline batteries. Open the battery compartment at the bottom of each microphone and insert the 2 AA batteries (included), ensuring correct polarity.
3. Koble til mottakeren: Plug the 6.35mm receiver directly into the 'MIC' input jack of your audio device (e.g., Karaoke Machine, Audio Amplifier, PA System, Mixer, Voice Amplifier). If your device has a 3.5mm 'MIC' input, use the included 3.5mm adapter. Note: This system is only compatible with 3.5mm or 6.35mm 'MIC' jacks and cannot be plugged into 'AUX' jacks. It does not support Bluetooth connections to phones, computers, or tablets.

Image: Power supply details for the microphone (AA batteries) and rechargeable receiver (USB-C charging).

Image: Step-by-step guide for initial setup: 1. Turn on the receiver. 2. Turn on the microphone. 3. Plug the receiver into the speaker's microphone input.

Bruksanvisning

1. Power On and Automatic Pairing:
   • Turn on the receiver by pressing its power button.
   • Turn on each microphone by pressing its power button. The microphones and receiver will automatically pair.
2. LCD Screen Information: The microphone's LED screen displays the connection status, current channel (e.g., CH01), and remaining battery power.
3. Trådløs rekkevidde: The system offers a wireless range of up to 160 feet (approximately 48 meters), ensuring stable and fast connection without delays.
4. Using Multiple Microphones: When using both microphones simultaneously, ensure they are operating on separate channels to avoid interference. The system supports up to 2 microphones for simultaneous use.
5. Lydkvalitet: The built-in professional dynamic microphone features a 95dB signal-to-noise ratio and 48 Khz audio signal sampling, along with noise reduction technology, to capture clear, pure, and full sound while minimizing background noise.

Image: Details of the microphone's LCD display for battery and channel status, and the power button. Also shows the rechargeable receiver.

Image: Visual representation of the 160ft wireless signal transmission range.

Image: Compatibility chart for the microphone system, indicating support for 6.35mm and 3.5mm MIC inputs on devices like karaoke machines, mixers, and PA systems.

Vedlikehold

• Batteribytte: Replace the AA batteries in the microphones when the battery indicator on the LCD screen shows low power. Always use new alkaline batteries for optimal performance.
• Mottakerlading: Recharge the receiver using the provided USB-C cable when its battery is low. Avoid overcharging for extended periods.
• Rengjøring: Use a soft, dry cloth to clean the microphones and receiver. Do not use liquid cleaners or abrasive materials, as these can damage the components.
• Lagring: When not in use for an extended period, remove the batteries from the microphones and store the system in a cool, dry place.

Feilsøking

• Ingen lyd fra mikrofonen:
  1. Ensure both the microphone and receiver have sufficient power. Check the LCD screen on the microphone for battery status.
  2. Verify that the receiver is connected to an audio device with a 'MIC' input (3.5mm or 6.35mm).
  3. If there is still no sound, re-pair the microphone and receiver:
     1. Turn off both the receiver and the microphone.
     2. Press and hold the channel adjustment button and the power button on the microphone simultaneously until the antenna icon on the display starts to flash.
     3. Within 2 seconds, quickly press the receiver's power button to turn it on. The devices should re-pair and be ready for use.
• Interference or Poor Signal:
  • Ensure the microphones are on separate channels if using two simultaneously.
  • Reduser avstanden mellom mikrofonene og mottakeren.
  • Unngå hindringer som kan blokkere signalet.
  • Se etter andre trådløse enheter som opererer på lignende frekvenser i nærheten.

Spesifikasjoner

Garanti og støtte

voijump provides a 3 års garanti for this wireless microphone system. We also offer 24-timers online support for å hjelpe deg med eventuelle spørsmål eller problemer du måtte støte på.

For technical assistance or warranty claims, please contact voijump customer service through the platform where you purchased the product or visit the official voijump webnettsted for kontaktinformasjon.