1. Introduksjon
This manual provides detailed instructions for the operation, maintenance, and troubleshooting of the POMIACAM MOT-51C OTDR Fiber Optic Tester. This device is designed for comprehensive fiber optic network analysis, offering functionalities such as Optical Time Domain Reflectometry (OTDR), Optical Power Meter (OPM), Visual Fault Locator (VFL), Light Source (LS), Optical Loss Test (OLT), and various cable testing features. Please read this manual thoroughly before using the device to ensure proper and safe operation.
2. Sikkerhetsinformasjon
Følg følgende sikkerhetsregler for å forhindre skade og skade på enheten:
- Ikke utsett enheten for ekstreme temperaturer, fuktighet eller direkte sollys.
- Unngå å miste eller utsette enheten for sterke støt.
- Ikke forsøk å åpne eller modifisere enheten. Overlat all service til kvalifisert personell.
- Bruk kun den spesifiserte ladekabelen og strømadapteren (ikke inkludert) til å lade enheten.
- Lasersikkerhet: The VFL and Light Source emit laser radiation. Avoid direct eye exposure to the laser beam. Do not look directly into the optical ports when the device is active.
- Ensure proper ventilation when operating or charging the device.
- Kast batterier i henhold til lokale forskrifter.
3. Pakkens innhold
Bekreft at alle varene som er oppført nedenfor er til stede i pakken din:
The complete package contents for the POMIACAM MOT-51C OTDR, including the main unit, cable tracker, USB cable, carrying case, quick guide, and calibration certificate.
- POMIACAM MOT-51C OTDR Main Unit
- Cable Tracker (for RJ45/BNC)
- USB ladekabel
- Beskyttende bæreveske
- OTDR Quick Guide
- Kalibreringssertifikat
- Note: A charging adapter is not included in the package.
4. Produktet er overview
The MOT-51C features a robust design with a 5.55-inch OLED touch screen for intuitive operation. Below are the key components and interfaces of the device.
4.1 enhetsgrensesnitt
Detaljert view of the top interface of the MOT-51C OTDR, highlighting the power button, network testing port, VFL, OPM, and OTDR/LS ports.
Detaljert view of the side interface of the MOT-51C OTDR, showing the LED lamp, Type-C input, UTP/Cable tracer port, Micro SD slot, DC5V/2A power output, and RS 485 port.
- Strømknapp: Slår enheten på/av.
- Network Testing Port (LAN/RJ45 TDR): For RJ45 cable testing.
- VFL-port: Utgang for visuell feilsøker.
- OPM-port: Inngang for optisk effektmåler.
- OTDR/LS Port: Optical Time Domain Reflectometer and Light Source output.
- LED Lamp: Gir belysning.
- Type-C 5V2A Input: For å lade enheten.
- UTP / Kabelsporingsport: For connecting the cable tracer unit.
- Micro SD -kortspor: For external storage.
- DC5V 1A Power Output (USB): Fungerer som en powerbank.
- RS 485 Port: For specific communication needs.
5. Oppsett
5.1 Battery Installation and Initial Use
The MOT-51C OTDR unit with an illustration of its 3.7V 4000mA Li-ion battery and a note about removing the battery isolation paper before first use. The screen shows the main menu.
- Battery Isolation: Before first use, open the battery cover and remove the paper piece isolating the battery. This prevents battery discharge during shipping.
- Lader: Connect the device to a 5V/2A USB power adapter (not included) using the provided Type-C USB cable. The device has a 3.7V 4000mAh Li-ion battery. A full charge takes approximately 3.5 hours and provides up to 6 hours of normal working time.
- Slå på/av: Press and hold the Power Button located on the top of the device to turn it on or off.
6. Bruksanvisning
The MOT-51C features a 5.55-inch OLED touch screen with a resolution of 1280x720 for easy navigation and operation.
The POMIACAM MOT-51C OTDR Fiber Optic Tester main unit shown alongside its accompanying cable tracker. The screen displays the main menu with various testing functions.
6.1 OTDR-test
The OTDR function is used to characterize optical fibers. It measures fiber length, loss, attenuation parameters, and generates an event map to locate link points and fusion points.
The MOT-51C OTDR's 5.55-inch OLED touch screen displaying an OTDR test curve with event list and parameters, indicating 1310/1550nm wavelengths and 24/26dB dynamic range.
- Bølgelengder: 1310/1550nm.
- Dynamisk område: 26/24dB.
- Max Test Range: Up to 100 km.
- Operasjon: Select "OTDR" from the main menu. Configure test parameters such as range, pulse width, and average time. Initiate the test. The device will automatically analyze linkers and fusion points.
- Curve Analysis: The touch screen allows zooming and moving of test curves to display details.
- Rapportering: Test reports can be generated, including waveform graphs, parameter settings, fiber event information, and fiber connection information. Reports can be saved in EXCEL, PDF, or screenshot formats.
- Note: This 1310nm/1550nm model cannot test live fiber.
6.2 Optisk effektmåler (OPM)
The OPM measures the optical power of a fiber optic signal.
- Calibrated Wavelengths: 850/1300/1310/1490/1550/1625nm.
- Operasjon: Select "OPM" from the main menu. Connect the fiber to the OPM port. The device will display the measured optical power.
6.3 Visuell feilsøker (VFL)
The VFL emits a visible red laser to locate breaks, bends, and poor connections in fiber optic cables over short distances.
- Bølgelengde: 650 nm.
- Max Test Range: Up to 8 km.
- Operasjon: Select "VFL" from the main menu. Connect the fiber to the VFL port. Activate the laser. Observe the fiber for red light leakage at fault points.
- Sikkerhetsadvarsel: Avoid direct eye exposure to the VFL laser.
6.4 Lyskilde (LS)
The LS provides a stable optical signal for various testing purposes, often used in conjunction with an OPM for loss measurements.
- Modus: CW (Continuous Wave), 270 Hz, 330 Hz, 1 kHz, 2 kHz.
- Operasjon: Select "Light Source" from the main menu. Choose the desired wavelength and modulation mode. Connect the fiber to the OTDR/LS port.
6.5 Optisk tapstest (OLT)
The OLT function is used to measure the insertion loss of optical passive devices or fiber links.
- Operasjon: Select "Optical Loss Test" from the main menu. This typically involves using the Light Source and OPM functions together to measure loss.
6.6 Multi-Functional Cable Testing
The device includes capabilities for testing copper cables.
- RJ45 Cable TDR Testing: Detects near-end, mid-end, and far-end faults in RJ45 cables. Maximum test length is 600 meters.
- Måling av kabellengde: Measures cable length for BNC, Cat 5/6, and elevator cables up to 1.5 kilometers.
- Operasjon: Select "Cable Tester" or "Cable Length" from the main menu. Follow on-screen prompts to connect the cable and perform the test.
6.7 Tilleggsfunksjoner
- PING-test: For network connectivity diagnostics.
- USB 5V 1A Power Output: The device can function as a power bank to charge other small electronic devices.
- FTP Server Support: gir rom for file overføringsmuligheter.
- Online oppdatering: Supports firmware updates via an internet connection.
- Innstillinger: Access the "Settings" menu to configure device parameters such as language, date, time, display brightness, and other system preferences.
7. Vedlikehold
- Rengjøring: Use a soft, dry cloth to clean the device's exterior. For the optical ports, use specialized fiber optic cleaning tools and solutions to prevent contamination.
- Lagring: Store the device in its protective carrying case in a cool, dry place when not in use. Avoid environments with high humidity or extreme temperatures.
- Batteripleie: For å forlenge batteriets levetid, unngå å utlade batteriet helt ofte. Hvis du oppbevarer det over lengre tid, lad batteriet til omtrent 50 % og lad det opp igjen med noen få måneders mellomrom.
- Programvareoppdateringer: Regularly check for and install online updates to ensure optimal performance and access to new features.
8. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Enheten slås ikke på. | Low battery; Battery isolation paper not removed. | Charge the battery; Remove the battery isolation paper (refer to Section 5.1). |
| Inaccurate OTDR readings. | Dirty optical connectors; Incorrect test parameters. | Clean optical connectors thoroughly; Verify and adjust OTDR test parameters (e.g., range, pulse width). |
| VFL/LS output is weak or absent. | Dirty optical port; Device malfunction. | Clean the VFL/LS optical port; If problem persists, contact support. |
| Berøringsskjermen reagerer ikke. | Midlertidig programvarefeil; Skjermskade. | Restart the device; If problem persists, contact support. |
| Cannot save test reports. | Insufficient internal storage; No Micro SD card inserted or card is full. | Delete old data; Insert a Micro SD card or ensure it has sufficient space. |
9. Spesifikasjoner
| Trekk | Spesifikasjon |
|---|---|
| Modellnummer | MOT-51C 1310/1550nm 26/24dB |
| Utstilling | 5.55 inch OLED Touch Screen, 1280 x 720 resolution |
| OTDR Wavelengths | 1310/1550 nm |
| OTDR dynamisk område | 26/24 dB |
| Max. OTDR Test Range | 100 km |
| Lyskildemoduser | CW/270/330/1000/2000 Hz |
| OPM-kalibrerte bølgelengder | 850/1300/1310/1490/1550/1625nm |
| VFL-bølgelengde | 650 nm |
| VFL Max. Test Range | 8 km |
| RJ45 TDR Max. Test Length | 600 m |
| Kabellengdemåling | Up to 1.5 km (BNC, Cat 5/6, elevator cables) |
| Batteri | 3.7V 4000mA Lithium-ion |
| Ladetid | Ca. 3.5 timer |
| Arbeidstid | Ca. 6 timer |
| Strøminngang | DC5V/2A (Type-C) |
| Strømutgang (USB) | DC5V/1A |
| Dimensjoner (pakke) | 26 x 14 x 10 cm |
| Vekt (pakke) | 1 kg |
| Sertifiseringer | CE, RoHS |
| UPC | 025128471228 |
10. Garanti og støtte
POMIACAM products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase documentation or visit the official POMIACAM webnettstedet. Vennligst ta vare på kjøpsbeviset for garantikrav.
