VOOPOO Vinci Spark 220

VOOPOO Vinci Spark 220 Mod Instruction Manual

Model: Vinci Spark 220

1. Introduksjon

This manual provides detailed instructions for the safe and effective use of your VOOPOO Vinci Spark 220 Mod. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. The Vinci Spark 220 Mod is a high-performance electronic cigarette device designed for experienced users. It requires external 18650 batteries and a compatible tank and coils, which are not included with this product.

Note: This product does not contain nicotine, tobacco, or e-liquid. It is intended for use with nicotine-free e-liquids only.

2. Pakkens innhold

Vennligst sjekk pakken for følgende varer:

  • 1 x VOOPOO Vinci Spark 220 Device (Mod only)
  • 1 x Type-C USB-kabel
  • 1 x brukerhåndbok

Note: External 18650 batteries, tank, and coils are not included and must be purchased separately.

3. Produktet er overview

The VOOPOO Vinci Spark 220 Mod features an innovative all-metal design, offering a compact and lightweight form factor. It supports dual external 18650 batteries and delivers up to 220W of power. The device includes a 1.47-inch TFT screen and a multifunctional wheel button for intuitive control.

VOOPOO Vinci Spark 220 Mod in green and silver

Image 3.1: VOOPOO Vinci Spark 220 Mod, showcasing its design and available colors.

VOOPOO Vinci Spark 220 Mod highlighting weight, screen size, and display resolution

Image 3.2: Key features of the Vinci Spark 220 Mod, including its 108g weight, 1.47-inch TFT screen, and high display resolution.

Nøkkelkomponenter:

  • 510 Kobling: For attaching compatible tanks.
  • Multifunctional Wheel Button: For power, wattage adjustment, and menu navigation.
  • 1.47'' TFT Screen: Viser informasjon om enheten.
  • Batterirom: Houses dual 18650 batteries.
  • Type-C USB-port: For lading og fastvareoppdateringer.
  • Power & Function Lock Switch: For å sikre enheten.

4. Oppsett

4.1 Installasjon av batteri

  1. Sørg for at enheten er slått av.
  2. Locate the easy-to-clip battery cover on the side of the device.
  3. Åpne batteridekselet.
  4. Insert two external 18650 batteries according to the correct polarity markings (+ and -) inside the compartment. Incorrect installation can damage the device.
  5. Lukk batteridekselet godt til det klikker på plass.
VOOPOO Vinci Spark 220 Mod showing battery compartment and wheel button

Image 4.1: Illustration of the battery compartment and the multifunctional wheel button.

4.2 Innledende lading

Although the device supports 5V/3A fast charging, it is recommended to charge external 18650 batteries using a dedicated external battery charger for optimal battery life and safety. If using the device's Type-C port:

  1. Connect the Type-C USB cable to the charging port on the device.
  2. Connect the other end of the cable to a suitable 5V/3A power adapter (not included).
  3. Skjermen vil vise ladestatus.
  4. Disconnect the device once fully charged.

4.3 Tank and Coil Installation (Not Included)

The Vinci Spark 220 Mod is compatible with the Uforce-X Tank (PnP X) and all PnP X Coils. Refer to the specific tank and coil manual for installation instructions. Ensure the tank is securely screwed onto the 510 connector of the mod.

5. Drift

5.1 Strøm på/av

  • Strøm på: Press the fire button 5 times rapidly within 2 seconds.
  • Slå av: Press the fire button 5 times rapidly within 2 seconds. Alternatively, use the dedicated Power & Function Lock Switch for quick power off and locking.

5.2 Modusvalg

The device supports three setting modes: Smart, RBA, and TC-TCR Mode. Navigate through the menu using the multifunctional wheel button to select your desired mode.

  • Smart modus: Automatically detects coil resistance and sets an appropriate wattage, preventing accidental coil burnout.
  • RBA-modus: Allows full wattage control for advanced users and rebuildable atomizers.
  • TC-TCR Mode: Temperature Control mode for specific coil materials (e.g., Stainless Steel, Titanium, Nickel).

5.3 Wattage Justering

Use the multifunctional wheel button to adjust the wattage. Rotate the wheel clockwise to increase wattage and counter-clockwise to decrease it. The wattage range is 5-220W.

5.4 Skjermgrensesnitt

The 1.47-inch TFT screen displays essential information such as current wattage, battery level, coil resistance, voltage, and puff count. The device offers 3 interface themes for customization.

5.5 Lock/Unlock Function

The dedicated Power & Function Lock Switch allows you to quickly lock or unlock the device, preventing accidental firing or setting changes during transport.

6. Vedlikehold

6.1 Rengjøre enheten

  • Regularly wipe the device with a dry, soft cloth to remove dust and fingerprints.
  • Clean the 510 connector area with a cotton swab to ensure good conductivity between the mod and the tank.
  • Unngå bruk av sterke kjemikalier eller slipende materialer, da disse kan skade overflaten.

6.2 Batteristell

  • Always use high-quality 18650 batteries from reputable brands.
  • Inspect battery wraps for damage regularly. Replace damaged batteries immediately.
  • Store spare batteries in protective cases.
  • Ikke utsett batterier for ekstreme temperaturer eller direkte sollys.

7. Feilsøking

If you encounter issues with your Vinci Spark 220 Mod, refer to the following common problems and solutions:

Problem Mulig årsak Løsning
Enheten slås ikke på Low battery, incorrect battery installation, device locked. Charge batteries, re-install batteries with correct polarity, unlock device using the switch or 5 clicks.
"Atomizer Short" or "No Atomizer" message Tank not connected, faulty coil, short circuit in tank. Ensure tank is securely attached, replace coil, clean 510 connector.
Weak vapor production Lavt wattage, low battery, old coil. Øk watttage, charge batteries, replace coil.
Enheten lader ikke Faulty cable, power adapter, or charging port. Try a different Type-C cable and power adapter. Ensure port is clean. Consider external battery charger.

If the problem persists, please contact VOOPOO customer support.

8. Spesifikasjoner

Technical specifications for the VOOPOO Vinci Spark 220 Mod:

  • Merke: VOOPOO
  • Produktnavn: Vinci Spark 220 Mod
  • Batteri: Dual external 18650 batteries (not included)
  • Effektområde: 5-220W
  • Utgang Voltage: 3.2-4.2V
  • Lader: Type-C 5V/3A
  • Skjerm: 1.47'' TFT
  • Motstandsområde: 0.1-3.0Ω
  • Compatible Tank: Uforce-X Tank (PnP X)
  • Compatible Coils: All PnP X Coils
  • Materiale: Aluminiumslegering
  • Produktdimensjoner: 45 x 29 x 95 mm (ca. 4.5 x 2.9 x 9.5 cm)
  • Vekt: 340 g (with packaging, device weight is approx. 108g)
Diagram showing top airflow, filling method, and PnP X coil compatibility

Image 8.1: Features of compatible Uforce-X Tank and PnP X Coils, including top airflow, slide-to-fill mechanism, and coil compatibility for rich flavor. Note: Tank and coils are sold separately.

VOOPOO Vinci Spark 220 Mod in various colors with specifications table

Bilde 8.2: Overview of available colors and a summary of key specifications for the Vinci Spark 220 Mod.

9. Sikkerhetsinformasjon

Vennligst observer følgende sikkerhetsregler:

  • Hold enheten unna vann og andre væsker.
  • Ikke utsett enheten for ekstreme temperaturer eller direkte sollys.
  • Ikke slipp, punkter eller demonter enheten.
  • Use only the recommended external 18650 batteries and ensure they are in good condition.
  • Charge the device on a fire-proof surface and never leave it unattended while charging.
  • Oppbevares utilgjengelig for barn og kjæledyr.
  • This product is intended for adult users only.
  • This product does not contain nicotine and is intended for use with nicotine-free e-liquids.

10. Garanti og støtte

VOOPOO products come with a limited warranty. Please refer to the warranty card included in your package or visit the official VOOPOO webnettstedet for detaljerte garantivilkår.

For technical support, troubleshooting assistance, or any other inquiries, please contact VOOPOO customer service through their official webnettstedet eller forhandleren der du kjøpte produktet.

Relaterte dokumenter - Vinci Spark 220

Preview VooPoo Vinci Spark 220-sett
Komplet utstyr for elektronisk sigaret VooPoo Vinci Spark 220 Kit. Obsahuje informace of funkcích, ovládání, plnění, nabíjení, bezpečnostních pokynech and řešení problémů.
Preview SMOK G-PRIV 220 Mod User Manual: Features, Operation, and Specifications
Comprehensive user manual for the SMOK G-PRIV 220 Mod, detailing its features, specifications, operation, safety precautions, and troubleshooting. Learn how to use the 220W touch screen device with replaceable 18650 batteries.
Preview VooPoo Vinci Spark 100 Kit User Manual and Guide
Comprehensive user manual for the VooPoo Vinci Spark 100 Kit, detailing setup, operation, safety, and troubleshooting for this advanced e-cigarette device.
Preview VOOPOO DRAG 3 brukerhåndbok
Omfattende brukermanual for VOOPOO DRAG 3 vape-mod, med detaljer om spesifikasjoner, grensesnittintroduksjon, betjeningstrinn, sikkerhetsforholdsregler og feilsøking.
Preview WISMEC Sinuous P80 Mod User Manual - Features, Operation, and Safety
Comprehensive user manual for the WISMEC Sinuous P80 Mod. Learn about its features, operating modes (VW, TC, TCR), safety protections, and usage instructions. Discover how to navigate menus, adjust settings, and maintain your device.
Preview Brukerhåndbok for VooPoo Argus Pod e-sigarett
Omfattende brukermanual for VooPoo Argus Pod e-sigaretten, som dekker oppsett, bruk, vedlikehold, sikkerhetsadvarsler og tekniske spesifikasjoner.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.