OREiN Motion Sensor Outdoor Lights, Smart Flood Light Outdoor

1. Viktige sikkerhetsinstruksjoner

Les og forstå alle instruksjonene før du installerer eller bruker dette produktet. Unnlatelse av å følge disse instruksjonene kan føre til elektrisk støt, brann eller andre farer som kan forårsake skade på eiendom eller personskade.

• Koble alltid fra strømmen ved sikringsskapet eller strømbryteren før installasjon eller service.
• Dette produktet må installeres i samsvar med gjeldende installasjonskode av en person som er kjent med konstruksjonen og driften av produktet og farene involvert.
• Use only UL-listed wire connectors for connections.
• Sørg for at alle koblinger er sikre og ordentlig isolert.
• Ikke installer i nærheten av brennbare materialer.
• This fixture is designed for outdoor use and is rated for wet locations.

2. Produktet er overview

The OREiN Motion Sensor Outdoor Light is a smart flood light designed to provide efficient and responsive illumination for outdoor spaces. It features an integrated motion sensor for automatic activation and can be controlled via smart features for enhanced functionality.

Figur 2.1: Generelt view of the OREiN Motion Sensor Outdoor Light. This image shows the overall design of the flood light, including the main light housing and the integrated motion sensor at the bottom.

3. Pakkens innhold

Kontroller at alle komponenter er til stede før installasjonen starter:

• OREiN Motion Sensor Outdoor Light Fixture
• Monteringsbrakett
• Monteringsskruer og veggankere
• Wire Nuts / Connectors
• Brukerhåndbok (dette dokumentet)

4. Oppsett og installasjon

4.1 Før du begynner

• Turn off power at the circuit breaker or fuse box to the outlet box where the light will be installed.
• Sørg for at monteringsflaten er stabil og kan bære vekten av armaturen.
• Finn frem nødvendige verktøy: skrutrekker, avisoleringstang, drill (hvis nødvendig).

4.2 Montering av lyset

1. Fest monteringsbraketten til koblingsboksen med de medfølgende skruene. Sørg for at braketten er godt festet.
2. Connect the household wires to the fixture wires: black to black (live), white to white (neutral), and green/bare copper to green (ground). Secure connections with wire nuts.
3. Legg ledningene forsiktig inn i koblingsboksen.
4. Align the fixture with the mounting bracket and secure it with the provided screws.
5. Apply silicone sealant around the edges of the fixture where it meets the mounting surface to prevent water intrusion.

4.3 Koblingsskjema

Connect the black wire from the fixture to the black (live) wire from the household circuit. Connect the white wire from the fixture to the white (neutral) wire from the household circuit. Connect the green or bare copper ground wire from the fixture to the ground wire from the household circuit. Ensure all connections are tight and insulated.

5. Bruksanvisning

5.1 Slå på

Once installation is complete, restore power at the circuit breaker. The light may cycle on and off once as it performs a self-test.

5.2 Justering av bevegelsessensor

The motion sensor can be adjusted for sensitivity and duration. Locate the adjustment dials or buttons on the sensor head.

• SENS (sensitivitet): Adjusts the detection range of the motion sensor. Turn clockwise for higher sensitivity (longer range), counter-clockwise for lower sensitivity (shorter range).
• TIME (Duration): Sets how long the light stays on after motion is detected. Adjust to your desired duration (e.g., 30 seconds to 10 minutes).
• LUX (Dusk-to-Dawn): Determines the ambient light level at which the sensor becomes active. Turn towards the sun icon for daylight operation (test mode) or towards the moon icon for night-only operation.

5.3 Smart Features / App Control

For smart control features, download the OREiN Smart Home app from your device's app store. Follow the in-app instructions to pair your flood light with your Wi-Fi network. This will allow for remote control, scheduling, and advanced customization of light settings.

6. Vedlikehold

Regular maintenance ensures optimal performance and longevity of your OREiN Motion Sensor Outdoor Light.

• Rengjøring: Periodically clean the lens and sensor with a soft, damp cloth to remove dirt, dust, or debris that may obstruct the sensor or reduce light output. Do not use abrasive cleaners.
• Undersøkelse: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure mounting screws are tight.
• Strømsyklus: If the light behaves erratically, try turning off the power at the circuit breaker for 30 seconds and then restoring it.

7. Feilsøking

Se tabellen nedenfor for vanlige problemer og løsningene på dem.

8. Spesifikasjoner

9. Garanti og støtte

OREiN products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please refer to the product packaging or the official OREiN webnettstedet for spesifikke garantivilkår.

For technical support, troubleshooting assistance, or warranty claims, please contact OREiN customer service:

• E-post: support@orein.com (Eksample email, please refer to actual product for contact details)
• Webnettsted: www.orein.com (Eksample website, please refer to actual product for contact details)

When contacting support, please have your product model number (B0DZX3J993) and purchase date available.