CADPXS Remote Controller User Manual

1. Introduksjon

This manual provides detailed instructions for the installation, operation, and maintenance of your CADPXS Remote Controller. This remote control is specifically designed for use with CADPXS Remois series crawl space dehumidifiers, including models X70, XP70, X125, XP125, X145, and XP145.

The remote controller offers convenient long-distance control of your dehumidifier, eliminating the need to access the unit directly in tight spaces. It features a digital display for humidity and temperature, and allows for precise adjustment of humidity levels and activation of continuous operation or drain pump functions.

Figur 1.1: The CADPXS Remote Controller shown with a compatible dehumidifier, illustrating its use in a crawl space environment.

2. Pakkens innhold

Vennligst sjekk at alle varene som er oppført nedenfor er inkludert i pakken din:

• CADPXS Remote Control Board
• Switch Box for mounting
• 25ft Connection Cable
• Monteringsskruer
• Installation Guidelines (this manual)

Figur 2.1: Visuell representasjon av varene som er inkludert i produktpakken.

3. Produktet er overview

The CADPXS Remote Controller features a clear LCD display and intuitive buttons for easy operation.

3.1. Remote Controller Layout

Figur 3.1: Front view of the CADPXS Remote Controller.

Figur 3.2: Labeled diagram of the remote controller's display and buttons.

3.2. Vis indikatorer

• RH: Displays the current Relative Humidity percentage.
• RT: Displays the current Room Temperature in Celsius.
• Cont.: Indicates that the dehumidifier is operating in Continuous mode.
• Vanndråpeikon: Indicates the dehumidifier is actively removing moisture.

3.3. Knappefunksjoner

• M (Modus): Cycles through different operating modes (e.g., setting humidity, setting temperature).
• T (Temperature): Vant til view or adjust the temperature setting.
• ▲ (Increase): Increases the set humidity or temperature value.
• ▼ (Decrease): Decreases the set humidity or temperature value.
• Ⓢ (Power): Turns the dehumidifier On or Off.
• C (Continuous Mode): Activates or deactivates continuous dehumidification.
• P (Drain Pump): Manually activates the drain pump (if applicable to your dehumidifier model).

4. Oppsett og installasjon

The remote controller is designed for flexible placement up to 25 feet away from your dehumidifier. Follow these steps for proper installation:

1. Velg en plassering: Select a convenient location for the remote controller, such as a wall in your living space, ensuring it is within 25 feet of the dehumidifier. Avoid areas with direct sunlight or drafts that could affect temperature and humidity readings.
2. Mount the Switch Box: Use the provided screws to securely mount the switch box to the chosen wall. Ensure the box is level.
3. Koble til kabelen: Route the 25ft connection cable from the dehumidifier to the mounted switch box. Connect the cable to the designated port on the switch box.
4. Attach the Control Board: Carefully align the remote control board with the switch box and secure it. Ensure a snug fit.
5. Bekreft tilkobling: Once installed, power on your dehumidifier and the remote controller. The display should illuminate, indicating a successful connection.

Figur 4.1: Example of the remote controller installed on a wall, providing convenient access.

Figur 4.2: The remote control board detaches from the switch box for installation.

5. Bruksanvisning

This section details how to use the CADPXS Remote Controller to manage your dehumidifier.

5.1. Slå på/av

• Trykk på Ⓢ (Power) button once to turn the dehumidifier On.
• Trykk på Ⓢ (Power) button again to turn the dehumidifier Off.

5.2. Adjusting Humidity Levels

The remote controller allows you to set desired humidity levels between 35% and 90% Relative Humidity (RH).

1. Trykk på M (modus) button until the RH percentage on the display starts flashing.
2. Bruk ▲ (Increase) or ▼ (Decrease) buttons to adjust the desired humidity level.
3. The setting will be saved automatically after a few seconds of inactivity, or you can press the M (modus) knappen igjen for å bekrefte.

5.3. Overvåking av temperatur

The remote controller's built-in sensor monitors the ambient room temperature.

• The current room temperature (RT) is continuously displayed on the LCD screen.
• Trykk på T (Temperature) button to cycle through temperature display options if available (e.g., Celsius/Fahrenheit, though this model typically displays Celsius).

5.4. Kontinuerlig modus

In Continuous mode, the dehumidifier will operate constantly regardless of the set humidity level, ideal for very damp conditions or continuous drying needs.

• Trykk på C (Continuous Mode) button to activate Continuous mode. The "Cont." indicator will appear on the display.
• Trykk på C (Continuous Mode) button again to deactivate Continuous mode. The "Cont." indicator will disappear, and the dehumidifier will revert to operating based on the set humidity level.

5.5. Drain Pump Control (If Applicable)

If your CADPXS dehumidifier model is equipped with a drain pump, you can manually activate it using the remote controller.

• Trykk på P (Drain Pump) button to manually activate the drain pump. This can be useful for purging accumulated water.
• Refer to your dehumidifier's specific manual for detailed information on drain pump operation.

Figur 5.1: Interacting with the remote controller for setting adjustments.

6. Vedlikehold

To ensure optimal performance and longevity of your CADPXS Remote Controller, follow these simple maintenance guidelines:

• Rengjøring: Regularly wipe the surface of the remote controller with a soft, dry cloth to remove dust and smudges. For stubborn dirt, a slightly damp klut kan brukes, etterfulgt av umiddelbar tørking. Unngå bruk av slipende rengjøringsmidler eller løsemidler.
• Miljøforhold: Keep the remote controller away from extreme temperatures, high humidity, and direct water exposure.
• Kabelinspeksjon: Periodically check the connection cable for any signs of damage, kinks, or wear. Ensure it is securely plugged into both the remote controller and the dehumidifier.

7. Feilsøking

If you encounter issues with your CADPXS Remote Controller, please refer to the following common problems and solutions:

For issues not covered here, please refer to the troubleshooting section of your CADPXS dehumidifier's main user manual or contact CADPXS customer support.

8. Spesifikasjoner

Figur 8.1: Physical dimensions of the CADPXS Remote Controller.

9. Garanti og støtte

9.1. Begrenset garanti

The CADPXS Remote Controller comes with a 5 års begrenset garanti.

Figur 9.1: Warranty information for the CADPXS Remote Controller.

For detailed warranty terms and conditions, please refer to the complete warranty statement provided with your product or visit the official CADPXS webDenne garantien dekker produksjonsfeil og materialfeil ved normal bruk.

9.2. Kundestøtte

Should you require assistance with your CADPXS Remote Controller, including technical support, troubleshooting, or warranty claims, please contact CADPXS customer service. Contact information can typically be found on the CADPXS official webnettstedet eller på produktemballasjen.

When contacting support, please have your product model number (Remote Controller for Remois Series) and purchase information readily available.