NETUM GY80U Ultra-Rugged Industrial Barcode Scanner User Manual

1. Produktet er overview

The NETUM GY80U is an ultra-rugged industrial barcode scanner designed for demanding environments. It features advanced DPM (Direct Part Mark) scanning capabilities, IP67 waterproof and dustproof rating, and a robust design capable of withstanding drops from up to 3 meters. This scanner supports 1D, 2D, and QR codes, including those that are blurry, damaged, or dirty. Connectivity options include 2.4G wireless, Bluetooth, and wired (USB HID, RS232), ensuring wide compatibility with various operating systems and devices.

2. Produktkomponenter

Pakken inneholder vanligvis følgende varer:

• NETUM GY80U Industrial Barcode Scanner
• Charging Stand / Multi-Function Dock
• 2 x 3200mAh Removable Batteries
• USB-kabel (for lading og kablet tilkobling)
• RS232 Cable (for serial connection)
• Brukerhåndbok (dette dokumentet)

Figure 2.1: NETUM GY80U Barcode Scanner, Charging Stand, and Connectivity Cables.

Figur 2.2: Detaljert view of the Multi-Function Dock, showing battery charging bay, magnetic charging port, and functional indicators.

Figur 2.3: Overview of the scanner's industrial structure, highlighting the high-flex trigger, lanyard slot, status indicator, real-time battery indicator, magnetic charging port, 3200mAh battery, 1280H x 1080V imaging sensors, and IP67 rating.

3. Installasjonsinstruksjoner

3.1 Batteriinstallasjon og lading

1. Installer batteri: Open the detachable battery cover on the scanner. Insert one of the provided 3200mAh batteries into the battery compartment, ensuring correct polarity. Close the cover securely.
2. Charge Scanner Battery: Place the scanner into the charging bay of the multi-function dock. The battery charging indicator on the dock will blink to indicate charging. It will turn solid when fully charged.
3. Lad opp reservebatteriet: The dock also features a dedicated bay for charging a spare battery simultaneously. Insert the second 3200mAh battery into this bay.
4. Koble til strøm: Connect the USB cable from the charging dock to a power source (e.g., computer USB port, USB wall adapter).

Figure 3.1: Battery installation and simultaneous charging of scanner and spare battery in the dock.

3.2 Første tilkobling

The scanner supports three connection modes: 2.4G Wireless, Bluetooth, and Wired (USB/RS232). Choose the appropriate mode for your application.

Figur 3.2: Overview of the scanner's versatile connectivity options.

3.2.1 2.4G trådløs tilkobling

1. Ensure the charging dock is connected to your computer via the USB cable. The dock acts as the 2.4G wireless receiver.
2. Slå på skanneren.
3. The scanner will automatically attempt to connect to the dock. A successful connection is indicated by a specific sound or light pattern (refer to scanner's LED indicator guide for details).
4. The 2.4G wireless connection offers an extended transmission range of up to 500 meters (1640 feet) in open areas.

3.2.2 Bluetooth-tilkobling

1. Slå på skanneren.
2. Scan the Bluetooth pairing barcode (usually found in a separate quick start guide or on the scanner itself).
3. On your host device (e.g., computer, tablet, smartphone), enable Bluetooth and search for available devices.
4. Select "NETUM GY80U" or a similar name from the list of devices to pair.
5. A successful connection is indicated by a specific sound or light pattern.
6. Bluetooth connection supports HID, SPP, and BLE data transmission modes with a range of up to 20 meters (66 feet).

3.2.3 Wired Connection (USB HID / RS232)

1. Connect the scanner directly to your computer using the provided USB cable for USB HID (keyboard emulation) or USB COM mode.
2. Alternatively, use the RS232 cable to connect the scanner to a device with a serial port.
3. The scanner will be recognized by your operating system. No additional drivers are typically required for USB HID mode. For USB COM or RS232, specific drivers or software configurations might be needed depending on your system.

4. Bruksanvisning

4.1 Grunnleggende skanning

1. Ensure the scanner is powered on and connected to your host device via one of the supported modes.
2. Rett skannerens bildevindu mot strekkoden du vil skanne.
3. Press and hold the trigger button. An aimer will project onto the barcode.
4. Position the aimer to cover the entire barcode.
5. Upon a successful scan, the scanner will emit a beep and/or the status indicator will change color. The decoded data will be transmitted to your host device.

The GY80U features superior 1280H x 1080V imaging sensors, allowing it to accurately read 1D and 2D barcodes as small as 3 mil. It can decode various code types, including QR-code, DataMatrix, PDF-417, and challenging DPM codes.

Figure 4.1: The scanner's advanced imaging capabilities for diverse barcode types, including DPM codes on metal, cast, oily, and curved surfaces.

4.2 DPM (Direct Part Mark) Scanning

The NETUM GY80U is specifically designed for DPM barcode scanning. It can read codes that are:

• Laser-etched on reflective metal surfaces
• Dot-peen marked on cast surfaces
• Engraved on oily or dirty surfaces
• Cut-out codes on PCB boards
• Laser-marked on resin
• Laser-engraved on cylindrical objects

For optimal DPM scanning, ensure proper lighting and angle. The integrated LED aimer assists in targeting these challenging codes.

4.3 Søknadsscenarier

Figur 4.2: Eksamples of the scanner's use in warehouse inventory, manufacturing, and quality control for scanning barcodes on packages, circuit boards, industrial parts, and lumber.

5. Vedlikehold

5.1 Rengjøring av skanneren

• Regularly clean the scanner's imaging window with a soft, lint-free cloth.
• For gjenstridig smuss, litt dampen the cloth with water or a mild, non-abrasive cleaning solution. Do not spray liquids directly onto the scanner.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the scanner's housing or imaging window.

5.2 Miljøvern

The NETUM GY80U is designed with an IP67 rating, making it waterproof and dustproof. It is also built with sturdy ABS and thickened soft TPU material, allowing it to withstand drops from up to 3 meters (9.84 feet).

• While rugged, avoid unnecessary exposure to extreme temperatures, direct sunlight for prolonged periods, or corrosive substances.
• Ensure the battery cover is securely closed to maintain the IP67 rating.

Figure 5.1: The scanner's durable housing provides IP67 protection and resistance to drops from significant heights.

5.3 Batteristell

• Use only the original 3200mAh batteries provided with the scanner.
• Charge batteries using the dedicated charging dock.
• Store spare batteries in a cool, dry place.
• If the scanner will not be used for an extended period, remove the battery.

6. Feilsøking

7. Spesifikasjoner

8. Garanti og støtte

The NETUM GY80U Industrial Barcode Scanner comes with a 1 års garanti fra kjøpsdatoen. Denne garantien dekker produksjonsfeil og funksjonsfeil ved normal bruk.

For technical support, warranty claims, or further assistance, please contact NETUM customer service. Refer to the product packaging or the official NETUM webnettstedet for den mest oppdaterte kontaktinformasjonen.

Produsent: GUANGZHOU NETUM ELECTRONIC TECHNOLOGY CO., LTD

Adresse: Room 301, 6th Floor and full 3rd Floor, Building A, Guangzhou, Guangdong, 511300, CN