Recaceik spisebordsett med topp i imitert marmor og benker, bruksanvisning

Viktig sikkerhetsinformasjon

Les alle instruksjonene nøye før montering og bruk. Ta vare på denne håndboken for senere referanse.

• Sørg for at alle deler er til stede og uskadet før monteringen starter. Ikke bruk hvis noen deler mangler eller er ødelagte.
• Monter produktet på en myk, ren overflate for å unngå riper.
• Stram alle festemidler godt til, men ikke overstram. Kontroller og stram festemidlene med jevne mellomrom etter behov.
• Do not stand or sit on the table. The table is designed for dining and general surface use.
• Distribute weight evenly on the table and benches.
• Hold små deler unna barn under montering.
• Avoid placing hot items directly on the faux marble tabletop without protection.

Pakkeinnhold

Bekreft at alle komponentene som er oppført nedenfor er inkludert i pakken. Hvis noen deler mangler eller er skadet, kan du kontakte kundestøtte.

• 1 x Dining Table (Faux Marble Top, Metal Frame)
• 2 x Dining Benches (PU Leather Upholstered, Metal Frame)
• 1 x Hardware Pack (Screws, Allen Wrench, etc.)
• 1 x monteringsanvisning

Figur 1: Overview of the Recaceik 3-piece dining table set, showing the faux marble top table and two upholstered benches.

Oppsett- og monteringsinstruksjoner

Assembly typically takes less than 30 minutes. It is recommended to have two people for easier assembly.

1. Pakk ut komponenter: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent damage. Identify all table and bench components, including frames, tops, and hardware.
2. Montering av bordramme: Attach the table legs to the table frame using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten yet.
3. Fest bordplaten: Carefully place the faux marble tabletop onto the assembled table frame. Align the pre-drilled holes on the tabletop with the holes on the frame. Secure the tabletop to the frame using the appropriate screws. Once the tabletop is attached, fully tighten all screws on the table frame and tabletop.
4. Montering av benkrammer: For each bench, attach the bench legs to the bench frame using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten yet.
5. Attach Bench Seats: Carefully place each upholstered bench seat onto its assembled bench frame. Align the pre-drilled holes on the bench seat with the holes on the frame. Secure the bench seat to the frame using the appropriate screws. Once the bench seats are attached, fully tighten all screws on the bench frames and seats.
6. Sluttsjekk: Gently lift and move the assembled table and benches to their desired location. Ensure all parts are stable and level. Adjust the leveling feet if necessary to prevent wobbling.

Figur 2: Illustration of the table's dimensions and key construction elements, including the thickened metal frame and MDF material with marble decoration.

Bruksanvisning (bruk)

This dining set is designed for versatile use in various living spaces.

• Servering: Use the table for meals, work, or other activities. The benches provide comfortable seating for up to four individuals.
• Plassbesparende: The benches are designed to tuck neatly under the table when not in use, maximizing floor space in smaller rooms or apartments.
• Plassering: Position the dining set on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material degradation.

Figur 3: Demonstration of the space-saving design, showing benches both in use and neatly stored under the table.

Vedlikehold og stell

Riktig stell vil forlenge levetiden og bevare utseendet til spisestuen din.

• Faux Marble Tabletop:
  • Tørk av søl umiddelbart med en myk, damp klut.
  • Clean regularly with a mild, non-abrasive cleaner and a soft cloth.
  • Avoid harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
  • Use coasters or placemats to protect the surface from hot dishes, scratches, and stains.
• PU Leather Benches:
  • Tørk av med en myk, damp klut.
  • For tougher stains, use a mild soap solution and wipe dry immediately.
  • Avoid direct sunlight exposure to prevent fading and cracking.
  • Do not use abrasive cleaners, solvents, or furniture polish on PU leather.
• Metall ramme: Tørk av med en myk, tørr klut for å fjerne støv.
• General: Periodically check and re-tighten all screws and bolts to ensure stability.

Feilsøking

Spesifikasjoner

Garanti og støtte

Specific warranty details for this product are not provided in the available information. Please refer to your purchase documentation or contact the retailer for warranty information.

For any questions, missing parts, or assistance, please contact Recaceik customer support through the retailer where the product was purchased or visit the official Recaceik webnettstedet.