Lian Li UNI Fan CL120 ARGB 120mm PWM Fans - Triple Pack User Manual

Introduksjon

The Lian Li UNI Fan CL120 ARGB 120mm PWM Fans - Triple Pack offers an advanced cooling solution for your PC. These fans feature a 2.4 GHz wireless signal for RGB and PWM control, dual light zones for dynamic ARGB effects, and durable FDB bearings for quiet operation. Designed for optimized airflow, this triple pack includes a controller for comprehensive management of fan speeds and lighting.

Nøkkelfunksjoner:

• Optimalisert luftstrøm: 28mm thick fans deliver high static pressure (up to 2.52 mm H2O) and 2150 RPM (Standard).
• Dynamic Dual-Zone ARGB: Control fan blades and side strips independently for striking, layered lighting effects.
• Trådløs mottaker: For easy setup and auto PWM recognition, designed to work seamlessly with standard 12V PWM motherboard headers.
• Stille drift: Equipped with FDB bearings for minimal noise (as low as 29.8 dBA).
• Unified L-Connect 3: Gain complete software control over fan speeds, RGB, and seamless sync across all your Lian Li devices.

Hva er i esken

Kontroller at alle komponenter er til stede før du fortsetter med installasjonen.

• 3 x Lian Li UNI Fan CL120 ARGB 120mm PWM Fans
• 1 x trådløs mottaker
• 1 x Controller
• 1 x SATA-strømkabel
• Monteringsskruer

Image: Three Lian Li UNI Fan CL120 ARGB fans shown connected together, illustrating the daisy-chain design.

Oppsett og installasjon

Follow these steps to properly install your Lian Li UNI Fan CL120 ARGB fans.

1. Prepare the Fans

The UNI Fan CL120 fans feature a daisy-chain design, allowing multiple fans to connect directly to each other without individual cables for each fan. This simplifies cable management.

Image: Two UNI Fan CL120 fans interlocked, demonstrating the daisy-chain connection points.

1. Align the connection points on the side of the fans.
2. Gently push the fans together until they click into place, forming a single unit.
3. Repeat for all three fans if installing as a block.

2. Install the Controller and Wireless Receiver

The included controller and wireless receiver manage both fan speed (PWM) and RGB lighting.

Image: The compact controller unit for the Lian Li UNI Fan CL120 ARGB system.

1. Mount the controller in a suitable location within your PC case, typically using adhesive pads or screws (not included).
2. Connect the daisy-chained fans to the controller using the provided cable. Ensure the connection is secure.
3. Connect the wireless receiver to an available USB 2.0 header on your motherboard.
4. Connect the SATA power cable from your power supply unit (PSU) to the controller to provide power.
5. Connect the 4-pin PWM cable from the controller to an available 4-pin fan header on your motherboard. This allows the motherboard to control fan speeds.

3. Mount the Fans

1. Position the assembled fan unit in your desired location (e.g., front intake, top exhaust, radiator).
2. Secure the fans to the PC case or radiator using the provided mounting screws. Ensure they are tightened sufficiently to prevent vibration.

Bruksanvisning

The Lian Li UNI Fan CL120 ARGB fans are controlled via the L-Connect 3 software.

1. Programvareinstallasjon

1. Download the latest version of the L-Connect 3 software from the official Lian Li webnettstedet.
2. Installer programvaren ved å følge instruksjonene på skjermen.
3. Start datamaskinen på nytt etter installasjonen hvis du blir bedt om det.

2. Kontroll av viftehastighet

Within the L-Connect 3 software, you can:

• Select predefined fan speed profiles (e.g., Silent, Standard, Performance).
• Create custom fan curves based on CPU or GPU temperature.
• Manually set a fixed RPM for all connected fans.

3. ARGB-lyskontroll

The UNI Fan CL120 features dual-zone ARGB lighting, allowing for intricate lighting effects.

Image: A single UNI Fan CL120 fan illuminated with a spectrum of ARGB colors.

• Access the RGB lighting section in L-Connect 3.
• Choose from a variety of preset lighting effects.
• Customize individual lighting zones (fan blades and side strips) with different colors and effects.
• Synchronize lighting with other Lian Li ARGB products.

Vedlikehold

Regelmessig vedlikehold sikrer optimal ytelse og levetid for viftene dine.

• Rengjøring: Periodically clean the fan blades and frames to remove dust buildup. Use a soft brush or compressed air. Ensure the PC is powered off before cleaning.
• Undersøkelse: Check fan cables and connections for any signs of wear or damage. Ensure fans are securely mounted.
• Programvareoppdateringer: Keep the L-Connect 3 software updated to benefit from performance improvements and new features.

Feilsøking

Hvis du støter på problemer, kan du se følgende vanlige problemer og løsninger.

Viftene spinner ikke

• Sjekk strøm: Ensure the SATA power cable is securely connected from the PSU to the controller.
• PWM-tilkobling: Verify the 4-pin PWM cable from the controller is correctly plugged into a motherboard fan header.
• Daisy-Chain Connection: Confirm all fans are properly interlocked and connected to the controller.
• Programvareinnstillinger: Open L-Connect 3 and check if fan speeds are set to 0 RPM or if a profile is selected that prevents spinning.

ARGB-belysning fungerer ikke

• Kontrollerkraft: Ensure the controller is receiving power via the SATA cable.
• USB-tilkobling: Verify the wireless receiver is correctly connected to a functional USB 2.0 header on the motherboard.
• Software Detection: Ensure L-Connect 3 detects the controller and fans. Try restarting the software or your PC.
• Daisy-Chain Connection: Confirm all fans are properly interlocked. A loose connection can disrupt the ARGB signal.

L-Connect 3 Software Not Detecting Fans/Controller

• USB-tilkobling: Re-check the USB 2.0 header connection for the wireless receiver. Try a different USB header if available.
• Installer programvare på nytt: Uninstall and reinstall L-Connect 3.
• Fastvareoppdatering: Check the Lian Li website for any available firmware updates for the controller.

Spesifikasjoner

Detailed technical specifications for the Lian Li UNI Fan CL120 ARGB 120mm PWM Fans.

Bilde: Bak view of a UNI Fan CL120, displaying model number, voltage, og sertifiseringer.

Garantiinformasjon

The Lian Li UNI Fan CL120 ARGB Triple Pack comes with a 3 års garanti fra kjøpsdatoen. Denne garantien dekker produksjonsfeil og sikrer at produktet oppfyller de spesifiserte ytelsesstandardene ved normal bruk.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Lian Li webnettstedet eller kontakt kundestøtte.

Støtte

For further assistance, technical support, or to download the latest software and drivers, please visit the official Lian Li webnettsted:

www.lian-li.com

Du kan også referere til Lian Li Store on Amazon for product information and customer reviews.