Wellue Magnetic Charging Cable for Checkme O2 Ultra Oxygen Monitor

Introduksjon

This manual provides essential information for the proper use and maintenance of your Wellue Magnetic Charging Cable. This cable is specifically designed for the Wellue Checkme O2 Ultra Oxygen Monitor.

Viktig merknad: This charging cable is not compatible with the Wellue Checkme O2 Max or any other device. It is intended solely for the Wellue Checkme O2 Ultra Oxygen Monitor.

Image: The Wellue Magnetic Charging Cable, showing its USB-A connector on one end and the magnetic charging interface with two pins on the other. The cable is white.

Oppsett

Follow these steps to prepare your charging cable for use:

1. Koble til strømkilde: Insert the USB-A end of the charging cable into a compatible USB power adapter (not included), a computer's USB port, or a power bank. Ensure the power source is functional and provides 5 Volts DC.
2. Prepare Monitor: Ensure your Wellue Checkme O2 Ultra Oxygen Monitor is clean and its charging port is free from dust or debris.
3. Attach Cable to Monitor: Gently bring the magnetic charging end of the cable close to the charging port on your Wellue Checkme O2 Ultra monitor. The magnets will align the cable correctly.
4. Bekreft tilkobling: The cable should snap securely into place. Do not force the connection.

Bruksanvisning

Once the cable is properly connected to both a power source and your Wellue Checkme O2 Ultra monitor, the device will begin charging.

• Ladeindikator: Refer to your Wellue Checkme O2 Ultra monitor's user manual for information on its charging status indicator (e.g., screen icon, LED light).
• Ladetid: A full charge typically takes approximately 2 hours, providing power for up to 10 nights of use for the monitor.
• Kobler fra: To disconnect, gently pull the magnetic end of the cable away from the monitor. Avoid pulling the cable by the wire itself.

Image: The Wellue Magnetic Charging Cable connected to a Wellue Checkme O2 Ultra monitor, illustrating the magnetic connection and indicating a charging time of 2 hours for 10 nights of use.

Vedlikehold

Proper care will extend the life of your charging cable:

• Rengjøring: Wipe the cable and magnetic connectors with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Lagring: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply.
• Håndtering: Always grasp the connector ends when plugging or unplugging the cable. Avoid pulling on the cable itself.
• Undersøkelse: Periodically inspect the cable for any signs of damage, such as fraying, cuts, or bent pins. Discontinue use if damage is observed.

Feilsøking

If you encounter issues with your charging cable, consider the following:

• Enheten lades ikke:
  • Ensure the USB-A end is fully inserted into a working power source.
  • Verify the magnetic end is correctly aligned and securely attached to the Wellue Checkme O2 Ultra monitor.
  • Prøv en annen USB-strømadapter eller USB-port.
  • Check the monitor's charging port for any obstructions.
• Kompatibilitetsproblemer:
  • Confirm that your device is a Wellue Checkme O2 Ultra Oxygen Monitor. This cable is ikke compatible with the Wellue Checkme O2 Max or other models.
• Kabelskade: If the cable shows any signs of physical damage (e.g., cuts, exposed wires, bent pins), discontinue use immediately and replace it.

Spesifikasjoner

Garantiinformasjon

Specific warranty details for this Wellue Magnetic Charging Cable are not provided in the product information. Please refer to the official Wellue website or contact their customer support for detailed warranty terms and conditions.

Kundestøtte

For further assistance, technical support, or inquiries regarding your Wellue Magnetic Charging Cable, please visit the official Wellue webnettstedet eller kontakt kundeserviceavdelingen deres. Kontaktinformasjon er vanligvis tilgjengelig på produsentens webnettsted eller produktemballasje.

Offisielle produktvideoer

No official product videos from the seller were found to be relevant for embedding in this manual.